| I had this Phone stuck on recovery For months...
flash after flash ... tool after tool
But the Final solution is With BEST NK2 ..... Thanks From The Heart
...............................
Card found : 8XXXXXXX , v0122
Infinity-Box BEST Nokia [HMD] Module [NK2] v1.07
Loading firmware ...
Created by Infinity-Box (c) BEST (c) 2018
Device Brand : Nokia
Device IntName : TA-1021_00WW
Device TA-IDxx : TA-1021
Device Manufact.: HMD Global
Device Model : PLE
Device CPU : MSM8937
Nokia Model : Nokia 6
CU_SWVer : HMD Global
Device Project : 600WW
Dev Build Info : TA-1021_00WW-user 7.1.2 N2G47H 00WW_3_700 release-keys
Dev CPU : MSM8937
Dev SKU : 600WW
SKU Vendor : NOKIA
SKU Locale : Worldwide
SKU Carier : FIH Generic
FOXCN_SW_A : PLE-3700-0-00WW-B0
Load Ok!
Operation : Flash [ v1.07 ]
ForceFlashing : Disabled
Verify FW package ...
Verification passed!
1. Power Off Phone , Remove battery , Insert back
2. Use BOOT JIG or EDL cable!
3. Insert USB cable, press "POWER_ON" button few times, if need
Wait for phone...
Device Found!
Initialize ...
Error : Fail to init protocol!
Check cable, connection and drivers!
Reconnect Power/Cable!
Operation : Flash [ v1.07 ]
ForceFlashing : Disabled
Verify FW package ...
Verification passed!
1. Power Off Phone , Remove battery , Insert back
2. Use BOOT JIG or EDL cable!
3. Insert USB cable, press "POWER_ON" button few times, if need
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 430 [MSM8937]
BB_IDC_SWB : 00000000
ID_BLOCK_S : B9489E48
ID_BLOCK_I : 0004F0E1
ID_BLOCK_L : 646297BBA5231FA8013E97B10726FB19
ID_BLOCK_L : 58681F818768B4C329A07AAD38CC2502
Pickup loader from firmware package
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8937 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : RX1BMB
Boot Ok!
Flash Chain : 65
Flashing now
Flashing : gpt_main0.bin
Flashing : NON-HLOS.bin
Flashing : sbl1.mbn
Flashing : sbl1.mbn
Flashing : rpm.mbn
Flashing : rpm.mbn
Flashing : tz.mbn
Flashing : tz.mbn
Flashing : devcfg.mbn
Flashing : devcfg.mbn
Flashing : adspso.bin
Flashing : sec.dat
Flashing : splash.img
Flashing : emmc_appsboot.mbn
Flashing : emmc_appsboot.mbn
Flashing : boot.img
Flashing : recovery.img
Flashing : ftm_boot.img
Flashing : def_npreset.mbn
Flashing : hwconf.cfg
Flashing : sysinfo.cfg
Flashing : splashm.img
Flashing : hidden.img
Flashing : cda.img
Flashing : persist.img
Flashing : misc.img
Flashing : mdtp.img
Flashing : cmnlib.mbn
Flashing : cmnlib.mbn
Flashing : cmnlib64.mbn
Flashing : cmnlib64.mbn
Flashing : keymaster.mbn
Flashing : keymaster.mbn
Flashing : system.img
Flashing : cache.img
Flashing : userdata.img
Flashing : gpt_backup0.bin
Wipe data ...
BootConfig set to 0x00
Flashing done!
When you will see ANDROID on screen make next steps :
1. Press and Hold both 'Vol_UP' and 'Power_On' keys
2. Hold them until device will reboot and show again ANDROID logo
3. Release 'Power_On' button, wait when color circle appear on screen!
Done!
Elapsed: 00:08:02
Reconnect Power/Cable! |