A105G Hang on Logo,
Write User Data Failed .
I try to flash 3 latest firmware, with odin, Z3X but problem is same
FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on the phone in download mode (turn off phone, press vol.down + home + power).
5. Connect the phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.
Operation: Flash
Selected model: SM-A105G
Software version: 39.1
File analysis... OK
Total file size: 0x10714F991 (4209 Mb)
Searching USB Flash interface... COM3 detected
Setup connection... OK
Set PIT file... OK
Reading PIT from phone... OK
Sending sboot.bin.lz4... OK
Sending param.bin.lz4... OK
Sending cm.bin.lz4... OK
Sending vbmeta.img.lz4... OK
Sending boot.img.lz4... OK
Sending recovery.img.lz4... OK
Sending dt.img.lz4... OK
Sending dtbo.img.lz4... OK
Sending system.img.lz4... OK
Sending vendor.img.lz4... OK
Sending userdata.img.lz4... error
Done with Samsung Tool PRO v.39.1