Quote:
Originally Posted by Octopus box  It means that connection isn't correct, please re-check pinots and wires attentive |
other smart tv but writting rom 1 its erorr
Model Settings:
Interface : eMMC
Voltage : 3.3V
Bus Mode : 4 bits
Bus speed : Auto
Connecting...
Device : Hynix eMMC HAG2e
Page size : 512 B
Block size : 512 B
Block count : 30785536
Size : 14.68 GB (15032.00 MB)
---------------------------------------------------------------
CID Info
CID : 90014A4841473265050352473A6CA3EB
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : HAG2e
Product revision : 0.3
Product serial number : (hex) 52473A6C
Manufacturing date : 10/2016
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFFFFFFFEF8A4040D3
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x78) 01111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7692288 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/HAG2e_18_05_2020_17_47_31.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.0.9; FW: 1.24.
The same area.
Opening C:/Users/sara/Desktop/new/EMMC_T16GE2_ROM1_ 36mhz 000000000000_0003AB400000.bin file...
Write data verification is enabled.
Writing. Please wait...
Read/write verification error. Possible reasons: damaged or write protected eMMC.
Disconnected.