Based on the following log can someone say if the memory is in a good shape?
Code:
eMMC_tool Suite ver. 1.6.3.0 (release date: 23.06.2020)
Microsoft Windows 10 (64 bit) build 18363 (10.0.18362.959)
Looking for EasyJTAG box...
EasyJTAG API ver. 3401
EasyJTAG Box Serial = XXXXXXXXX
Card Serial = XXXXXXXXXX
EasyJTAG Box Firmware = 2.5204
Changelog:
Setting interface to EasyJtag2/ISP
Setting bus width to 1 Bit
Setting interface to EasyJtag2/ISP
Setting bus width to 1 Bit
Setting frequence to 12 MHz
CMD Pullup Level: 2093 mV
CMD Active Level: 2263 mV
EMMC Device Information :
EMMC CID: 150100475836424D42004550066165FF
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: GX6BMB , HEX: 475836424D42 , S/N: 45500661 , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 6/2018
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000) Counter: 66 , Response: Not Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x38 , Boot from: ROM1 (Main User Area)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: GX6BMB_45500661_20200805_173740.extcsd
EMMC Init completed.
Get firmware version
Brand = samsung
Manufacturer = samsung
Device = a6plte
Model = SM-A605GN
CPU Abi = armeabi-v7a
Android release = 8.0.0
Security Patch = 2018-04-01
Firmware version = R16NW.A605GNUBU1ARD7
Firmware date = Wed Apr 25 13:16:15 KST 2018