| Freak Poster
Join Date: Aug 2015
Posts: 403
Member: 2439409
Status: Offline Thanks Meter: 104 | j200h after boot repair show mtp usb device only [Answered]
Welcome to Medusa Pro Software version 2.1.1.
Started.
Reader #0: Generic EMV Smartcard Reader 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-J200H
SRF : C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-J200H_EMMC.srf
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC H8G4t
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info
CID : 90014A48384734742101A5B994A7A279
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H8G4t
Product revision : 0.1
Product serial number : (hex) A5B994A7
Manufacturing date : 10/2015
---------------------------------------------------------------
CSD Info
CSD : D07F01320F5903FFFFFFFFEF8A400013
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 80 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x08) 00001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/H8G4t_18_08_2020_16_39_13.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.1.1; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: SBOOT (00002000, 00001000) 2048 KB
P02: SBOOT2 (00003000, 00001000) 2048 KB
P03: wfixnv1 (00004000, 00000800) 1024 KB
P04: wfixnv2 (00004800, 00000800) 1024 KB
P05: tdfixnv1 (00005000, 00000800) 1024 KB
P06: tdfixnv2 (00005800, 00000800) 1024 KB
P07: WDSP (00006000, 00002000) 4 MB
P08: MODEM (00008000, 00004000) 8 MB
P09: MODEM2 (0000C000, 00004000) 8 MB
P10: TDDSP (00010000, 00002000) 4 MB
P11: FOTA_SIG (00012000, 00000800) 1024 KB
P12: wruntimenv1 (00012800, 00000800) 1024 KB
P13: wruntimenv2 (00013000, 00000800) 1024 KB
P14: tdruntimenv1 (00013800, 00000800) 1024 KB
P15: tdruntimenv2 (00014000, 00000800) 1024 KB
P16: PARAM (00014800, 00001000) 2048 KB
P17: efs (00015800, 0000A000) 20 MB
P18: prodnv (0001F800, 00002800) 5 MB
P19: RESERVED2 (00022000, 00001000) 2048 KB
P20: KERNEL (00023000, 00008000) 16 MB
P21: RECOVERY (0002B000, 00008000) 16 MB
P22: PERSISTENT (00033000, 00000800) 1024 KB
P23: persdata (00033800, 00004800) 9 MB
P24: CACHE (00038000, 00064000) 200 MB
P25: SYSTEM (0009C000, 002EE000) 1500 MB
P26: HIDDEN (0038A000, 0000F000) 30 MB
P27: userdata (00399000, 00AF0000) 5.469 GB
Backuping efs partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/H8G4t_efs_0x15800_0xa000_18_08_2020_16_39_13.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:07
SW: 2.1.1; FW: 1.24.
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : d2000000 bytes
Device sector size : 512 bytes
Partition offset : 638976
Number of sectors : 3072000
Device Manufacturer : samsung
Device Platform : sc8830
Build ID : LMY48B
Display Build ID : LMY48B.J200HXXU0AQK2
Release ID : 5.1.1
Device Model : SM-J200H
Device Name : j23gdd
Architecture ABI : armeabi-v7a
Architecture ABI2 : armeabi
Architecture ABI List : armeabi-v7a,armeabi
Build Description : j23gdd-user 5.1.1 LMY48B J200HXXU0AQK2 release-keys
---------------------------------------------------------------Repairing from file "C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-J200H_EMMC.srf".
Write data verification is enabled.
Switched to boot area partition 1.
Writing BOOT1 partition... Done.
Switched to boot area partition 2.
Writing BOOT2 partition... Done.
Switched to user area.
Writing GPT partition... Done.
Writing SBOOT partition... Done.
Writing SBOOT2 partition... Done.
Writing wfixnv1 partition... Done.
Writing wfixnv2 partition... Done.
Writing tdfixnv1 partition... Done.
Writing tdfixnv2 partition... Done.
Writing WDSP partition... Done.
Writing MODEM partition... Done.
Writing MODEM2 partition... Done.
Writing TDDSP partition... Done.
Writing FOTA_SIG partition... Done.
Writing wruntimenv1 partition... Done.
Writing wruntimenv2 partition... Done.
Writing tdruntimenv1 partition... Done.
Writing tdruntimenv2 partition... Done.
Writing PARAM partition... Done.
Writing efs partition... Done.
Writing prodnv partition... Done.
Writing RESERVED2 partition... Done.
Writing KERNEL partition... Done.
Writing RECOVERY partition... Done.
Writing PERSISTENT partition... Done.
Writing persdata partition... Done.
Smart Repair is successfully complete.
SW: 2.1.1; FW: 1.24.
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-J200H
SRF : C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-J200H_EMMC.srf
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC H8G4t
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info
CID : 90014A48384734742101A5B994A7A279
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H8G4t
Product revision : 0.1
Product serial number : (hex) A5B994A7
Manufacturing date : 10/2015
---------------------------------------------------------------
CSD Info
CSD : D07F01320F5903FFFFFFFFEF8A400013
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 80 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x08) 00001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/H8G4t_18_08_2020_16_44_06.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.1.1; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: SBOOT (00002000, 00001000) 2048 KB
P02: SBOOT2 (00003000, 00001000) 2048 KB
P03: wfixnv1 (00004000, 00000800) 1024 KB
P04: wfixnv2 (00004800, 00000800) 1024 KB
P05: tdfixnv1 (00005000, 00000800) 1024 KB
P06: tdfixnv2 (00005800, 00000800) 1024 KB
P07: WDSP (00006000, 00002000) 4 MB
P08: MODEM (00008000, 00004000) 8 MB
P09: MODEM2 (0000C000, 00004000) 8 MB
P10: TDDSP (00010000, 00002000) 4 MB
P11: FOTA_SIG (00012000, 00000800) 1024 KB
P12: wruntimenv1 (00012800, 00000800) 1024 KB
P13: wruntimenv2 (00013000, 00000800) 1024 KB
P14: tdruntimenv1 (00013800, 00000800) 1024 KB
P15: tdruntimenv2 (00014000, 00000800) 1024 KB
P16: PARAM (00014800, 00001000) 2048 KB
P17: efs (00015800, 0000A000) 20 MB
P18: prodnv (0001F800, 00002800) 5 MB
P19: RESERVED2 (00022000, 00001000) 2048 KB
P20: KERNEL (00023000, 00008000) 16 MB
P21: RECOVERY (0002B000, 00008000) 16 MB
P22: PERSISTENT (00033000, 00000800) 1024 KB
P23: persdata (00033800, 00004800) 9 MB
P24: CACHE (00038000, 00064000) 200 MB
P25: SYSTEM (0009C000, 002EE000) 1500 MB
P26: HIDDEN (0038A000, 0000F000) 30 MB
P27: userdata (00399000, 00AF0000) 5.469 GB
Backuping efs partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/H8G4t_efs_0x15800_0xa000_18_08_2020_16_44_06.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:07
SW: 2.1.1; FW: 1.24.
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : d2000000 bytes
Device sector size : 512 bytes
Partition offset : 638976
Number of sectors : 3072000
Device Manufacturer : samsung
Device Platform : sc8830
Build ID : LMY48B
Display Build ID : LMY48B.J200HXXU0AQK2
Release ID : 5.1.1
Device Model : SM-J200H
Device Name : j23gdd
Architecture ABI : armeabi-v7a
Architecture ABI2 : armeabi
Architecture ABI List : armeabi-v7a,armeabi
Build Description : j23gdd-user 5.1.1 LMY48B J200HXXU0AQK2 release-keys
---------------------------------------------------------------
Selected pit file: C:/Users/HP/Downloads/SM-J200H(LMY48B.J200HXXU0APK1-5.1.1-LMY48B)[H8G4t!_21BAE8D6]_Dump Dead Boot Repair/userarea_2GiB.bin
Unknown format of input file C:/Users/HP/Downloads/SM-J200H(LMY48B.J200HXXU0APK1-5.1.1-LMY48B)[H8G4t!_21BAE8D6]_Dump Dead Boot Repair/userarea_2GiB.bin!
Selected pit file: C:/Users/HP/Downloads/SM-J200H by SH_Rom_BD/SM-J200H by SH_Rom_BD/J23G_EUR_OPEN.pit
Open file "C:/Users/HP/Downloads/SM-J200H by SH_Rom_BD/SM-J200H by SH_Rom_BD/BL_J200HXXU0APK1_CL1145746_QB11476181_REV00_user_l ow_ship.tar.md5".
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Writing PIT
Write data verification is enabled.
Writing. Please wait...
Switched to boot area partition 1.
Writing partition BOOT... from 0 to 40 Done.
Switched to user area.
Writing partition SBOOT... from 2000 to C02 Done.
Writing partition SBOOT2... from 3000 to C02 Done.
Writing partition PARAM... from 14800 to 460 Done.
Writing is finished.
SW: 2.1.1; FW: 1.24.
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-J200H
SRF : C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-J200H_EMMC.srf
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC H8G4t
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info
CID : 90014A48384734742101A5B994A7A279
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H8G4t
Product revision : 0.1
Product serial number : (hex) A5B994A7
Manufacturing date : 10/2015
---------------------------------------------------------------
CSD Info
CSD : D07F01320F5903FFFFFFFFEF8A400013
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 80 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x08) 00001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/H8G4t_18_08_2020_16_57_07.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.1.1; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: sboot (00002000, 00001000) 2048 KB
P02: sboot2 (00003000, 00001000) 2048 KB
P03: wfixnv1 (00004000, 00000800) 1024 KB
P04: wfixnv2 (00004800, 00000800) 1024 KB
P05: tdfixnv1 (00005000, 00000800) 1024 KB
P06: tdfixnv2 (00005800, 00000800) 1024 KB
P07: wdsp (00006000, 00002000) 4 MB
P08: modem (00008000, 00004000) 8 MB
P09: modem2 (0000C000, 00004000) 8 MB
P10: tddsp (00010000, 00002000) 4 MB
P11: fota_sig (00012000, 00000800) 1024 KB
P12: wruntimenv1 (00012800, 00000800) 1024 KB
P13: wruntimenv2 (00013000, 00000800) 1024 KB
P14: tdruntimenv1 (00013800, 00000800) 1024 KB
P15: tdruntimenv2 (00014000, 00000800) 1024 KB
P16: param (00014800, 00001000) 2048 KB
P17: efs (00015800, 0000A000) 20 MB
P18: prodnv (0001F800, 00002800) 5 MB
P19: reserved2 (00022000, 00001000) 2048 KB
P20: kernel (00023000, 00008000) 16 MB
P21: recovery (0002B000, 00008000) 16 MB
P22: persistent (00033000, 00000800) 1024 KB
P23: persdata (00033800, 00004800) 9 MB
P24: cache (00038000, 00064000) 200 MB
P25: system (0009C000, 002EE000) 1500 MB
P26: hidden (0038A000, 0000F000) 30 MB
P27: userdata (00399000, 00AF5000) 5.479 GB
Backuping efs partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/H8G4t_efs_0x15800_0xa000_18_08_2020_16_57_07.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:07
SW: 2.1.1; FW: 1.24.
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : d2000000 bytes
Device sector size : 512 bytes
Partition offset : 638976
Number of sectors : 3072000
Device Manufacturer : samsung
Device Platform : sc8830
Build ID : LMY48B
Display Build ID : LMY48B.J200HXXU0AQK2
Release ID : 5.1.1
Device Model : SM-J200H
Device Name : j23gdd
Architecture ABI : armeabi-v7a
Architecture ABI2 : armeabi
Architecture ABI List : armeabi-v7a,armeabi
Build Description : j23gdd-user 5.1.1 LMY48B J200HXXU0AQK2 release-keys
---------------------------------------------------------------Disconnected. |