GSM-Forum - View Single Post

biochemistali · 10-04-2020, 09:26

need flash file for TA 1212

Quote:

Originally Posted by JayDi

Code:

Operation : Identify [ v1.21 ]

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Care Suite USB Serial Port (COM22)
MODE : NOKIA USB SERIAL
PORT : 22
BROM : Init BROM
BROM init passed!
     CHIP : MT6260 , SBID : 0xCB00 , HWVR : 0x8000 , SWVR : 0x0000
BROM : SECCFG : 0x00000005
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 07xxxxxxxxxxxxxxxxxxxxxxxx
BROM : Run BootLoader ... 
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ... 
BOOT : RTC : 000E
BOOT : PRJ : PISCES.10.01.11.p1
BOOT : SWR : 10.01.11
BOOT : BDDS : 30
BOOT : PSRM : Init
BOOT : PSRM : 0003

Boot done!

SWVer : PISCES.10.01.11.p1
FLASH : 00EF : 0060 : 0018 : 0000
PRDC : 059Z0X8
IMEI[1] : 35xxxxxxxxxxx
IMEI[2] : 35xxxxxxxxxxx
NCK  : 20 digits
PROV : 24407000

Saved as  : 35xxxxxxxxxxxx.mtsec
Saved to  : C:\Infinity-Box\BEST2\Backup\


Done!
Elapsed: 00:00:24

 Reconnect Power/Cable!

Code:

 
Operation : Read FirmWare [ v1.21 ]

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Care Suite USB Serial Port (COM22)
MODE : NOKIA USB SERIAL
PORT : 22
BROM : Init BROM
BROM init passed!
     CHIP : MT6260 , SBID : 0xCB00 , HWVR : 0x8000 , SWVR : 0x0000
BROM : SECCFG : 0x00000005
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 07xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
BROM : Run BootLoader ... 
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ... 
BOOT : RTC : 000E
BOOT : PRJ : PISCES.10.01.11.p1
BOOT : SWR : 10.01.11
BOOT : BDDS : 30
BOOT : PSRM : Init
BOOT : PSRM : 0003

Boot done!

SWVer : PISCES.10.01.11.p1
FLASH : 00EF : 0060 : 0018 : 0000
CODE  : 0x00C40000
Reading Flash ... 
TDSN : TA-1212
PRDC : 059Z0X8
PPM  : EI
LANG : 
[1] : Georgian (Georgia)
[2] : Armenian (Armenia)
[3] : Romanian (Romania)
[4] : Ukrainian (Ukraine)
[5] : Belarusian (Belarus)
[6] : Uzbek (Uzbekistan)
[7] : Russian (Russia)
[8] : Kazakh (Kazakhstan)
[9] : Azeri (Azerbaijan)
[10] : English (United Kingdom)

BUILD : TA-1212_ROM_eMP_10.01.11
BUILD : TA-1212_LANG_PACK_ROM_EI_eMP_10.01.11_001
BUILD : TA-1212_CUSTPACK_ROM_EI_eMP_10.01.11_001
BUILD : TA-1212_JUMP_TABLE_EI_eMP_10.01.11_001
BUILD : TA-1212_VIVA_eMP_10.01.11

Make VPL definition

Save Path : C:\Nokia\FP\TA-1212\
Save Name : TA-1212_059Z0X8_10.01.11.vpl

Build Finished!

Done!
Elapsed: 00:06:00

Code:

Open VPLfile : TA-1212_059Z0X8_10.01.11.vpl
Description  : TA-1212 EI
DeviceType   : TA-1212
ProductCode  : 059Z0X8
SoftwareVer  : 10.01.11
Load Ok!

Operation : Write FirmWare [ v1.21 ]
Setting   : UserData erase : True
Setting   : LangPack Only : False

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Care Suite USB Serial Port (COM22)
MODE : NOKIA USB SERIAL
PORT : 22
BROM : Init BROM
BROM init passed!
     CHIP : MT6260 , SBID : 0xCB00 , HWVR : 0x8000 , SWVR : 0x0000
BROM : SECCFG : 0x00000005
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 07xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
BROM : Run BootLoader ... 
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ... 
BOOT : RTC : 000E
BOOT : PRJ : PISCES.10.01.11.p1
BOOT : SWR : 10.01.11
AGENT : Look for suitable BootChain in DA ... 
AGENT : DEFAULT AUTO
AGENT : Found MT6260
AGENT : PISCES.10.01.11.p1
     BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ... 
DA : Sync Passed!
DA : Authentification pass!
DA : Agent : v03.02 on BBID : 0x8B

        NOR: 00C8 : 0060 : 0018 : 0000
        NOR: [GigaDevice] GD25LQ128
        NOR: 
              TSIZE  : 0x01000000 [ 16,00 MB ]
              PSIZE  : 0x01000000 [ 16,00 MB ]
              STYPE  : 0x00000000
              FLOTP  : DA_NOR_OTP_NOT_SUPPORT

 STATUS : OK
 BSTYLE : SF_FLASH_BOOT

Boot done!

VPL SoftwareVersion   : 10.01.11 [TA-1212]
DEV SoftwareVersion   : 10.01.11
SWInfo compare result : SAME

Load FlashSet : 
MROM : TA-1212_ROM_eMP_10.01.11
LANG : TA-1212_LANG_PACK_ROM_EI_eMP_10.01.11_001
CUST : TA-1212_CUSTPACK_ROM_EI_eMP_10.01.11_001
JUMP : TA-1212_JUMP_TABLE_EI_eMP_10.01.11_001
VIVA : TA-1212_VIVA_eMP_10.01.11

Prepare FlashSet : 
DCR : TA-1212_ROM_eMP_10.01.11
DCR : TA-1212_LANG_PACK_ROM_EI_eMP_10.01.11_001
DCR : TA-1212_CUSTPACK_ROM_EI_eMP_10.01.11_001
DCR : TA-1212_JUMP_TABLE_EI_eMP_10.01.11_001
DCR : TA-1212_VIVA_eMP_10.01.11

Prepare Target 
SDS : OK : 0x00FF4000 : 0x0000C000
FFS Format Ok!

Erase Target Flash 
Erase done!

Write Target Flash
Write : TA-1212_ROM_eMP_10.01.11
Write : TA-1212_LANG_PACK_ROM_EI_eMP_10.01.11_001
Write : TA-1212_CUSTPACK_ROM_EI_eMP_10.01.11_001
Write : TA-1212_JUMP_TABLE_EI_eMP_10.01.11_001
Write : TA-1212_VIVA_eMP_10.01.11
Write done, waiting target response ... 
Write flash done!

Verify Target FlashContent
Verify : TA-1212_ROM_eMP_10.01.11
Verify : TA-1212_LANG_PACK_ROM_EI_eMP_10.01.11_001
Verify : TA-1212_CUSTPACK_ROM_EI_eMP_10.01.11_001
Verify : TA-1212_JUMP_TABLE_EI_eMP_10.01.11_001
Verify : TA-1212_VIVA_eMP_10.01.11

Done!
Elapsed: 00:02:36

 Reconnect Power/Cable!

Code:

 Operation : Reset Settings [ v1.21 ]

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Care Suite USB Serial Port (COM22)
MODE : NOKIA USB SERIAL
PORT : 22
BROM : Init BROM
BROM init passed!
     CHIP : MT6260 , SBID : 0xCB00 , HWVR : 0x8000 , SWVR : 0x0000
BROM : SECCFG : 0x00000005
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 07xxxxxxxxxxxxxxxx
BROM : Run BootLoader ... 
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ... 
BOOT : RTC : 000E
BOOT : PRJ : PISCES.10.01.11.p1
BOOT : SWR : 10.01.11
AGENT : Look for suitable BootChain in DA ... 
AGENT : DEFAULT AUTO
AGENT : Found MT6260
AGENT : PISCES.10.01.11.p1
     BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ... 
DA : Sync Passed!
DA : Authentification pass!
DA : Agent : v03.02 on BBID : 0x8B

        NOR: 00C8 : 0060 : 0018 : 0000
        NOR: [GigaDevice] GD25LQ128
        NOR: 
              TSIZE  : 0x01000000 [ 16,00 MB ]
              PSIZE  : 0x01000000 [ 16,00 MB ]
              STYPE  : 0x00000000
              FLOTP  : DA_NOR_OTP_NOT_SUPPORT

 STATUS : OK
 BSTYLE : SF_FLASH_BOOT

Boot done!

FFS Info exists in MAUI : 0x00C40000  :  0x003B4000
FFS Format ... 
FFS Format Ok!

Done!
 Elapsed: 00:00:28