| Freak Poster
Join Date: Oct 2016
Posts: 269
Member: 2640240
Status: Offline Thanks Meter: 150 | j727p dead boot repair done but now show 9008 port [Answered]
Welcome to Medusa Pro Software version 2.1.3.
Started.
Reader #0: Generic EMV Smartcard Reader 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-J727P
SRF : C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-J727P_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC Q313BB
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100513331334242006E1CAC61C429
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : Q313BB
Product revision : 0.0
Product serial number : (hex) 6E1CAC61
Manufacturing date : 12/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7692288 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/Q313BB_15_10_2020_06_20_46.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.1.3; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: sbl1 (00002000, 00000400) 512 KB
P02: sbl1bak (00002400, 00000400) 512 KB
P03: ddr (00002800, 00000400) 512 KB
P04: rpm (00002C00, 00000400) 512 KB
P05: tz (00003000, 00001000) 2048 KB
P06: aboot (00004000, 00001000) 2048 KB
P07: sec (00005000, 00000200) 256 KB
P08: lksecapp (00005200, 00000400) 512 KB
P09: keymaster (00005600, 00000400) 512 KB
P10: cmnlib (00005A00, 00000200) 256 KB
P11: fsg (00005C00, 00002000) 4 MB
P12: cmnlib64 (00007C00, 00000200) 256 KB
P13: pad (00007E00, 00000200) 256 KB
P14: modemst1 (00008000, 00002000) 4 MB
P15: modemst2 (0000A000, 00002000) 4 MB
P16: efs (0000E000, 00008000) 16 MB
P17: fsc (00016000, 00001A00) 3328 KB
P18: ssd (00017A00, 00000200) 256 KB
P19: devcfg (00017C00, 00000200) 256 KB
P20: apdp (00017E00, 00000100) 128 KB
P21: msadp (00017F00, 00000100) 128 KB
P22: param (00018000, 00006000) 12 MB
P23: backup (0001E000, 00002000) 4 MB
P24: boot (00020000, 00010000) 32 MB
P25: recovery (00030000, 00010000) 32 MB
P26: bota (00040000, 00004000) 8 MB
P27: fota (00044000, 00002000) 4 MB
P28: persist (00046000, 00010000) 32 MB
P29: persistent (00056000, 00000800) 1024 KB
P30: steady (00056800, 00002000) 4 MB
P31: keystore (00058800, 00000800) 1024 KB
P32: config (00059000, 00000800) 1024 KB
P33: dsp (00059800, 00008000) 16 MB
P34: modem (00061800, 00030000) 96 MB
P35: apnhlos (00091800, 00012000) 36 MB
P36: reserved2 (000A3800, 00000800) 1024 KB
P37: system (000A4000, 006D8000) 3504 MB
P38: cache (0077C000, 00096000) 300 MB
P39: carrier (00812000, 00018000) 48 MB
P40: userdata (0082A000, 0152E000) 10.59 GB
Backuping fsg partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/Q313BB_fsg_0x5c00_0x2000_15_10_2020_06_20_46.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:01
SW: 2.1.3; FW: 1.24.
Backuping modemst1 partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/Q313BB_modemst1_0x8000_0x2000_15_10_2020_06_20_46. bin file...
Reading. Please wait... Done.
Elapsed time 00:00:01
SW: 2.1.3; FW: 1.24.
Backuping modemst2 partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/Q313BB_modemst2_0xa000_0x2000_15_10_2020_06_20_46. bin file...
Reading. Please wait... Done.
Elapsed time 00:00:01
SW: 2.1.3; FW: 1.24.
Backuping efs partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/Q313BB_efs_0xe000_0x8000_15_10_2020_06_20_46.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:06
SW: 2.1.3; FW: 1.24.
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : ab400000 bytes
Device sector size : 512 bytes
Partition offset : 671744
Number of sectors : 7176192
Device Manufacturer : samsung
Device Platform : msm8953
Build ID : NRD90M
Display Build ID : NRD90M.J727PVPS3ARA1
Release ID : 7.0
Device Model : SM-J727P
Device Name : j7popltespr
Architecture ABI : arm64-v8a
Architecture ABI List : arm64-v8a,armeabi-v7a,armeabi
Build Description : j7popltespr-user 7.0 NRD90M J727PVPS3ARA1 release-keys
---------------------------------------------------------------
Selected pit file: C:/Users/hp/Downloads/J7POP_USA_SPR.pit
Open file "C:/Users/hp/Downloads/J727PVPU6BSF2-(SPT)(Firmware 4 Files) (Android 8.1.0 Oreo) File By (Support.**************)_2/AP_J727PVPU6BSF2_CL14631142_QB24254597_REV00_user_ low_ship_MULTI_CERT_meta.tar.md5".
Open file "C:/Users/hp/Downloads/J727PVPU6BSF2-(SPT)(Firmware 4 Files) (Android 8.1.0 Oreo) File By (Support.**************)_2/BL_J727PVPU6BSF2_CL14631142_QB24254597_REV00_user_ low_ship_MULTI_CERT.tar.md5".
Open file "C:/Users/hp/Downloads/J727PVPU6BSF2-(SPT)(Firmware 4 Files) (Android 8.1.0 Oreo) File By (Support.**************)_2/CP_J727PVPU6BSF2_CP12997269_CL14631142_QB24254597_ REV00_user_low_ship_MULTI_CERT.tar.md5".
Open file "C:/Users/hp/Downloads/J727PVPU6BSF2-(SPT)(Firmware 4 Files) (Android 8.1.0 Oreo) File By (Support.**************)_2/CSC_SPT_J727PSPT6BSF2_CL14631142_QB24254597_REV00_ user_low_ship_MULTI_CERT.tar.md5".
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Writing PIT
Write data verification is enabled.
Writing. Please wait...
Writing partition SBL1... from 2000 to 23A Done.
Writing partition RPM... from 2C00 to FB Done.
Writing partition TZ... from 3000 to 48C Done.
Writing partition ABOOT... from 4000 to 768 Done.
Writing partition SEC... from 5000 to 2 Done.
Writing partition LKSECAPP... from 5200 to C6 Done.
Writing partition KEYMASTER... from 5600 to 13B Done.
Writing partition CMNLIB... from 5A00 to 150 Done.
Writing partition DEVCFG... from 17C00 to 2F Done.
Writing partition APDP... from 17E00 to 17 Done.
Writing partition MSADP... from 17F00 to 17 Done.
Writing partition BOOT... from 20000 to 717F Done.
Writing partition RECOVERY... from 30000 to 8B10 Done.
Writing partition PERSIST... from 46000 to 37 Done.
Writing partition DSP... from 59800 to 1B45 Done.
Writing partition MODEM... from 61800 to 17001 Done.
Writing partition APNHLOS... from 91800 to 4C2B Done.
Writing partition RESERVED2... from A3800 to 4C2B Done.
Writing partition SYSTEM... from A4000 to 424A67 Done.
Writing partition CACHE... from 77C000 to 20F53 Done.
Writing partition USERDATA... from 82A000 to 14CA8C Done.
Writing is finished.
SW: 2.1.3; FW: 1.24.
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-J727P
SRF : C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-J727P_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC Q313BB
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100513331334242006E1CAC61C429
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : Q313BB
Product revision : 0.0
Product serial number : (hex) 6E1CAC61
Manufacturing date : 12/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7692288 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/Q313BB_15_10_2020_07_20_10.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.1.3; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: sbl1 (00002000, 00000400) 512 KB
P02: sbl1bak (00002400, 00000400) 512 KB
P03: ddr (00002800, 00000400) 512 KB
P04: rpm (00002C00, 00000400) 512 KB
P05: tz (00003000, 00001000) 2048 KB
P06: aboot (00004000, 00001000) 2048 KB
P07: sec (00005000, 00000200) 256 KB
P08: lksecapp (00005200, 00000400) 512 KB
P09: keymaster (00005600, 00000400) 512 KB
P10: cmnlib (00005A00, 00000200) 256 KB
P11: fsg (00005C00, 00002000) 4 MB
P12: cmnlib64 (00007C00, 00000200) 256 KB
P13: pad (00007E00, 00000200) 256 KB
P14: modemst1 (00008000, 00002000) 4 MB
P15: modemst2 (0000A000, 00002000) 4 MB
P16: efs (0000E000, 00008000) 16 MB
P17: fsc (00016000, 00001A00) 3328 KB
P18: ssd (00017A00, 00000200) 256 KB
P19: devcfg (00017C00, 00000200) 256 KB
P20: apdp (00017E00, 00000100) 128 KB
P21: msadp (00017F00, 00000100) 128 KB
P22: param (00018000, 00006000) 12 MB
P23: backup (0001E000, 00002000) 4 MB
P24: boot (00020000, 00010000) 32 MB
P25: recovery (00030000, 00010000) 32 MB
P26: bota (00040000, 00004000) 8 MB
P27: fota (00044000, 00002000) 4 MB
P28: persist (00046000, 00010000) 32 MB
P29: persistent (00056000, 00000800) 1024 KB
P30: steady (00056800, 00002000) 4 MB
P31: keystore (00058800, 00000800) 1024 KB
P32: config (00059000, 00000800) 1024 KB
P33: dsp (00059800, 00008000) 16 MB
P34: modem (00061800, 00030000) 96 MB
P35: apnhlos (00091800, 00012000) 36 MB
P36: reserved2 (000A3800, 00000800) 1024 KB
P37: system (000A4000, 006D8000) 3504 MB
P38: cache (0077C000, 00096000) 300 MB
P39: carrier (00812000, 00018000) 48 MB
P40: userdata (0082A000, 0152E000) 10.59 GB
Backuping fsg partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/Q313BB_fsg_0x5c00_0x2000_15_10_2020_07_20_10.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:01
SW: 2.1.3; FW: 1.24.
Backuping modemst1 partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/Q313BB_modemst1_0x8000_0x2000_15_10_2020_07_20_10. bin file...
Reading. Please wait... Done.
Elapsed time 00:00:01
SW: 2.1.3; FW: 1.24.
Backuping modemst2 partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/Q313BB_modemst2_0xa000_0x2000_15_10_2020_07_20_10. bin file...
Reading. Please wait... Done.
Elapsed time 00:00:01
SW: 2.1.3; FW: 1.24.
Backuping efs partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/Q313BB_efs_0xe000_0x8000_15_10_2020_07_20_10.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:06
SW: 2.1.3; FW: 1.24.
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : ab400000 bytes
Device sector size : 512 bytes
Partition offset : 671744
Number of sectors : 7176192
Device Manufacturer : samsung
Device Platform : msm8953
Build ID : M1AJQ
Display Build ID : M1AJQ.J727PVPU6BSF2
Release ID : 8.1.0
Device Model : SM-J727P
Device Name : j7popltespr
Architecture ABI : arm64-v8a
Architecture ABI List : arm64-v8a,armeabi-v7a,armeabi
Build Description : j7popltespr-user 8.1.0 M1AJQ J727PVPU6BSF2 release-keys
---------------------------------------------------------------
alredy chack with bit 3,4, and now flash with 6 but still same probem |