[sameera]

Originally Posted by mwk2712

Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.05

Load IDBase v42913 Ok!


Open : SPD_PROG.xml
Reading package ...
Read package finished!

Created by Infinity-Box (c) 2019
Chinese Miracle II : Spreadtrum / UniSoc Service Module
Device Info file : _Android_info.txt

Patch Level : OPM2.171019.012
Display ID : QSmartLT200_MP_11_09
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2019-08-05
Build Time : 1568205071
Product Model : LT200
Product Brand : QSmart
Product Name : LT200
Product Device : LT200
Product Manfct : QMobile
Product Info : LT200
Product Board : sp9850ka_1h10
Board Platform : sp9850ka


Operation : Flash Firmware [ v2.05 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True

Setting : WholeFLASH FORMAT : True
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
ERROR : Protocol HandShake failed!

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Flash Firmware [ v2.05 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True

Setting : WholeFLASH FORMAT : True
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
ERROR : FLASH FDL NOT started!

Error : Fail to boot FDL!
Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!

Operation : Flash Firmware [ v2.05 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True

Setting : WholeFLASH FORMAT : True
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9850x_BASE : SC9850_eMMC_2GB_SS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

ERASE : FORMAT WHOLE FLASH ...
ERASE : FORMAT FLASH Completed!

PMTMng : Skip update! Reason : untested chain!

UBOOT : u-boot.bin
Failed to update block!
ERROR : 000000A2:84000000FF7B7E00
NVM : WRITE FAILED!


Error : Flashing failed!
Check previous message for more info!

Reconnect Power/Cable!

Operation : Flash Firmware [ v2.05 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9850x_BASE : SC9850_eMMC_2GB_SS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

PMTMng : Skip update! Reason : untested chain!

UBOOT : u-boot.bin
Failed to update block!
ERROR : 000000A2:84000000FF7B7E00
NVM : WRITE FAILED!


Error : Flashing failed!
Check previous message for more info!

Reconnect Power/Cable!

SC9850x_BASE : SC9850_eMMC_1GB_SS