| Can't init EMMC, Reason: DATA RCV Timeout Error
this error comes when i work with Samsung mobiles
other brand oppo vivo mi working good
please tell me some solution
Z3X EasyJtag Software ver. 3.7.0.20
Loading eMMC GEN2 Firmware... IO: 1800 mV
Box S/N: 8C30F9F3F3B1121F, ,FW Ver.: 02.53
CMD Pullup Level:1804 mV
CMD Active Level:1826 mV
Box IO Level:1800 mV
CLK Rate:12000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
---------- eMMC Device Information ----------
eMMC CID : 15010051333133424200B5FBB8842497
eMMC CSD : D02701320F5903FFF6DBFFEF8E40400D
eMMC Manufacturer ID: 0015 , OEM ID: 0100
eMMC Date: 02/2017 Rev.0x0
eMMC NAME: Q313BB , S/N: 3053172868
eMMC NAME (HEX): 513331334242
Can't init EMMC, Reason: DATA RCV Timeout Error
Check Data Line!
Done.
Can't init device, Reason: Initialization failed
Done.
Z3X EasyJtag Software ver. 3.7.0.20
Loading eMMC GEN2 Firmware... IO: 2800 mV
Box S/N: 8C30F9F3F3B1121F, ,FW Ver.: 02.53
CMD Pullup Level:1818 mV
CMD Active Level:2119 mV
Box IO Level:2800 mV
CLK Rate:12000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
Can't init device, Reason: CMD Timeout Error
Done.
Thank You |