Quote:
Originally Posted by Medusa Box  Hello.
Please post here full Software log with performed operation, we will check it. |
Welcome to Medusa Pro Software version 2.2.0.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: Alcor Micro USB Smart Card Reader 1
Reader #2: FT SCR2000 0
Loading firmware. Please wait... Done.
Selected eMMC interface.
Socket detected!
Selected BGA 221 socket.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Sony
Model : G3221
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SONY_G3221_EMMC.srf
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting to server. Please wait...
Connection to server successful
Full speed mode!
Connecting...
Device : Samsung eMMC RX14MB
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100525831344D420F5C3C9A6294F3
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : RX14MB
Product revision : 0.15
Product serial number : (hex) 5C3C9A62
Manufacturing date : 09/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 2048 Kbytes
Boot2 size : 2048 Kbytes
RPMB size : 128 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/RX14MB_14_04_2021_12_35_50.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.0; FW: 2.00.
RPMB: Authentication Key not yet programmed.
Factory Format will erase all eMMC data!
Do you want to continue? Yes.
Formating...Done.
SW: 2.2.0; FW: 2.00.
Disconnected.
Selected BGA 221 socket.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Sony
Model : G3221
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SONY_G3221_EMMC.srf
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto
Full speed mode!
Connecting...
Device : Samsung eMMC RX14MB
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100525831344D420F5C3C9A6294F3
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : RX14MB
Product revision : 0.15
Product serial number : (hex) 5C3C9A62
Manufacturing date : 09/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 2048 Kbytes
Boot2 size : 2048 Kbytes
RPMB size : 128 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/RX14MB_14_04_2021_12_36_03.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.0; FW: 2.00.
RPMB: Authentication Key not yet programmed.
Writing eMMC firmware from file: C:/Users/mesut/Desktop/G3221/G3221 samsung emmc backup/RX14MB_VNC0_00000000000000000000000000000000_8_0_R 1_14_08_19.bin...Done.
Finalizing...Done.
Write CID succesfully completed.
Disconnected.
EMMC writing firmware Done.
SW: 2.2.0; FW: 2.00.
Selected BGA 221 socket.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Sony
Model : G3221
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SONY_G3221_EMMC.srf
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto
Full speed mode!
Connecting...
Device : Samsung eMMC RX14MB
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100525831344D420F5C3C9A6294F3
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : RX14MB
Product revision : 0.15
Product serial number : (hex) 5C3C9A62
Manufacturing date : 09/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/RX14MB_14_04_2021_12_36_32.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.0; FW: 2.00.
RPMB: Authentication Key not yet programmed.
Flash geometry successfully changed.
Boot1, Boot2 size changed to 4 MB.
RPMB size changed to 4 MB.
Disconnected.
Selected BGA 221 socket.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Sony
Model : G3221
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SONY_G3221_EMMC.srf
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto
Full speed mode!
Connecting...
Device : Samsung eMMC RX14MB
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100525831344D420F5C3C9A6294F3
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : RX14MB
Product revision : 0.15
Product serial number : (hex) 5C3C9A62
Manufacturing date : 09/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/RX14MB_14_04_2021_12_36_55.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.0; FW: 2.00.
RPMB: Authentication Key not yet programmed.
Boot config succesfully changed!
Disconnected.
Selected BGA 221 socket.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Sony
Model : G3221
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SONY_G3221_EMMC.srf
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto
Full speed mode!
Connecting...
Device : Samsung eMMC RX14MB
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100525831344D420F5C3C9A6294F3
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : RX14MB
Product revision : 0.15
Product serial number : (hex) 5C3C9A62
Manufacturing date : 09/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/RX14MB_14_04_2021_12_37_09.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.0; FW: 2.00.
RPMB: Authentication Key not yet programmed.
Selected ftf file: C:/Users/mesut/Desktop/G3221/Sony XA1 Ultra_G3221/FTF/G3221_48.1.A.2.109_1308-0674_Customized-TR/G3221_48.1.A.2.109_1308-0674_R1B.ftf.
File parsing finished.
Writing MBR... Done
Writing primary GPT... Done
Writing secondary GPT... Done
Write data verification is enabled.
Writing. Please wait...
Backuping TA partition... Opening C:/Program Files/Medusa Pro Software/Backups/RX14MB_TA_0x28400_0x1000_14_04_2021_12_38_20.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.0; FW: 2.00.
Done.
Writing partition fotakernel...
ERROR[012]: Write error.
At sector 0