Please I need urgent help [Answered] Welcome to Octoplus Huawei Software v.1.2.5
To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode
To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode
To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'
Found COM ports:
2021-09-23 12:30:35 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: MRD-LX1
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Checking the existence of the auto firmware file...
Performing ON Factory Mode operation...
Initializing remote service connection...
Checking firmware package type
Searching device in Upgrade mode...
Detected DBAdapter Reserved Interface port
Connecting to phone..
Warning: Switching your device to Factory Mode is not possible! Please, connect your device via Test Point and perform the desired operation.
ON/OFF Factory Mode failed.
Performed by 1.2.5 Software version.
2021-09-23 12:30:41 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: MRD-LX1
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Checking the existence of the auto firmware file...
Performing ON Factory Mode operation...
Initializing remote service connection...
Checking firmware package type
Searching device in Upgrade mode...
Detected DBAdapter Reserved Interface port
Connecting to phone..
Phone connect successfully!
Writing firmware partitions...
Writing SHA256RSA partition...
Writing CRC partition...
Writing BASE_VERLIST partition... Error: Failed write BASE_VERLIST partition
and Now the phone is stuck eRecovery
plz octoplus team help me |