ine lx1 read write question [Answered] hello
ine lx1 8 version but still read write cert fail
here,s the logs
Welcome to Octoplus Huawei Software v.1.2.8
To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode
To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode
To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'
Found COM ports:
1: COM17 USB Serial Port
2: COM105 HUAWEI USB COM 1.0
Job ID: 00000000021C2678
2022-01-14 06:35:29
Starting Read Cert
Selected phone model: INE-LX1
Searching HUAWEI USB COM 1.0 port...
Detected HUAWEI USB COM 1.0 port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing XLOADER partition...
Writing UCE partition...
Writing FASTBOOT partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device:
Detected Android Sooner Single ADB Interface port
Device Model: INE-LX1
System: INE-LX1 8.2.0.137(C432)
MEID:
IMEI A:
IMEI B:
S/N:
Reading certificate files...
Reading certificate for IMEI A...
Error: Can't get current certificate file!
Warning: Skipping read certificate for IMEI A
Reading certificate for IMEI B...
Error: Can't get current certificate file!
Warning: Skipping read certificate for IMEI B
Rebooting device...
Read Cert done.
Performed by 1.2.8 Software version. |