[pepik]

Note for steps for unlock C975 0.6.3.6 , E1070 :
On Smartlip Web page are this steps :



Boot 6.36
Check "Unlock automatically" - after prepare procedure phone will be unlocked

7. Log to bookmark "Prepare".
8. Select the appropriate model from SmartMoto list. Make sure that phone model and boot version of the phone to be unlocked exactly match the model and boot version stated in the list.
9. Press "Prepare" button.
10. The prepare cycle starts. SmartMoto creates a Temporary Backup File from the handset firmware.
11. At this time popup window appears at SmartMoto interface. Please follow the instructions provided therein
* Disconnect cable from the phone;
* Remove and insert phone’s battery;
* Press "Power on" key on the phone. Phone's LCD remains blank;
this step not work for me /after power on phone - phone start bootmode and next step give me error /
right step is :
connect phone /not power up/
* Connect cable to the phone;
* Press OK in SmartMoto.
12. The handset should be detected by SmartMoto as "S Blank..."
13. SmartMoto restores the temporary backup file.
next procedures unlock phone


If the option "Unlock automatically" was marked – the handset becomes unlocked.