GSM-Forum - View Single Post

themobileking · 12-16-2002, 07:47

There is of course a possibility that the Power IC has become dry contact after the fall...do this....

Without LCD ..try to switch on the set applying pressure to the power ic...if it does not switch on ..then try twisting the PCB a little and pressing the power button at the same time

))

if the set switches on ..then you are confirmed that the Pow IC is dry and you can re-flow.

12-16-2002, 07:47	#3 (permalink)
themobileking No Life Poster Join Date: Jun 2001 Location: Uranus Age: 53 Posts: 731 Member: 5072 Status: Offline Thanks Meter: 91	There is of course a possibility that the Power IC has become dry contact after the fall...do this.... Without LCD ..try to switch on the set applying pressure to the power ic...if it does not switch on ..then try twisting the PCB a little and pressing the power button at the same time)) if the set switches on ..then you are confirmed that the Pow IC is dry and you can re-flow.