| ONE WITH ATB CHIP V4.71 IT FAILED EARLIER
SO I UPGRADED TO V5.00 AND IS UNLOCKED IN FIRST TRY
Searching for phone ...
Phone found on FBUS interface
Reading phone info ...
Type: RM-217
Version: V_04.71_28-02-07_RM-217_(c)_Nokia.
IMEI: xxxxxxxxxxxxxxx
SP LOCK status:
Config Key: 2343300000000000
Block 1: CLOSED Type 5 Data: 23433F
Block 2: CLOSED Type 5 Data: 23486F
Keyboard wrong codes counter: 0 wrong tries from max. 3 tries
Cable wrong codes counter: 5 wrong tries from max. 10 tries
Skip autobackup of PM 308
Autobackup file:
RM-217_xxxxxxxxxxxxxxxxx_Locked_Keycnt_0_Fbuscnt_5__V _04.71_28-02-07_RM-217_(c)_Nokia..bin
already exist
Auto Write PM 308 procedure started
Searching for backup file with lowest FBUS count ...
Finded backup file: RM-217_xxxxxxxxxxxxxxx_Locked_Keycnt_0_Fbuscnt_0__V_0 4.71_28-02-07_RM-217_(c)_Nokia..bin
Writting PM Field 308 Subfield 1 with length 8192 bytes
Reset phone ...
PM Field 308 Subfield 1 written OK
Reading SP Locks after Auto Write PM 308 ...
SP LOCK status:
Config Key: 2343300000000000
Block 1: CLOSED Type 5 Data: 23433F
Block 2: CLOSED Type 5 Data: 23486F
Keyboard wrong codes counter: 0 wrong tries from max. 3 tries
Cable wrong codes counter: 0 wrong tries from max. 10 tries
Reset phone in TEST mode ...
Checking if model/version is supported for unlock ...
Please connect testpoints
Testpoints connected OK
Keep Testpoints connected until unlock finish!
Unlocking phone ...
Delaying unlock procedure with 5000 miliseconds
Try number: 1
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Try number: 2
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Try number: 3
Sending SP code: #pw+012345678901234+7#
Response byte: 14
Try number: 4
Sending SP code: #pw+012345678901234+7#
Response byte: 14
Try number: 5
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 6
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 7
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 8
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 9
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 10
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Unlock fail. Please try again.
AFTER UPGRADING
Searching for phone ...
Phone found on FBUS interface
Reading phone info ...
Type: RM-217
Version: V_05.00_27-04-07_RM-217_(c)_Nokia.
IMEI: xxxxxxxxxxxxxxx
SP LOCK status:
Config Key: 2343300000000000
Block 1: CLOSED Type 5 Data: 23433F
Block 2: CLOSED Type 5 Data: 23486F
Keyboard wrong codes counter: 0 wrong tries from max. 3 tries
Cable wrong codes counter: 3 wrong tries from max. 10 tries
Create autobackup of PM 308
Reading PM Field 308 Subfield 1 with length 8192 bytes
Saving autobackup to file: RM-217_xxxxxxxxxxxx_Locked_Keycnt_0_Fbuscnt_3__V_05.0 0_27-04-07_RM-217_(c)_Nokia..bin
Auto Write PM 308 procedure started
Searching for backup file with lowest FBUS count ...
Finded backup file: RM-217_xxxxxxxxxxxxxx_Locked_Keycnt_0_Fbuscnt_3__V_05 .00_27-04-07_RM-217_(c)_Nokia..bin
Writting PM Field 308 Subfield 1 with length 8192 bytes
Reset phone ...
PM Field 308 Subfield 1 written OK
Reading SP Locks after Auto Write PM 308 ...
SP LOCK status:
Config Key: 2343300000000000
Block 1: CLOSED Type 5 Data: 23433F
Block 2: CLOSED Type 5 Data: 23486F
Keyboard wrong codes counter: 0 wrong tries from max. 3 tries
Cable wrong codes counter: 3 wrong tries from max. 10 tries
Reset phone in TEST mode ...
Checking if model/version is supported for unlock ...
Please connect testpoints
Testpoints connected OK
Keep Testpoints connected until unlock finish!
Unlocking phone ...
Delaying unlock procedure with 5000 miliseconds
Try number: 1
Sending SP code: #pw+012345678901234+7#
Response byte: 00
Reading again SP Locks ...
SP LOCK status:
Config Key: 2343300000000000
Block 1: OPEN Type 5 Data: 23433F
Block 2: OPEN Type 5 Data: 23486F
Keyboard wrong codes counter: 0 wrong tries from max. 3 tries
Cable wrong codes counter: 0 wrong tries from max. 10 tries
Phone unlocked succesfull
SORRY TO BE PAIN
BR |