| when i do complete formate.........
COM3 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: reset
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
chip: 0031:AE41:4E98
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 98004900000002:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #01 in region #00...
flash: 98004900000002:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 98004900000002:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #01 in region #00...
flash: 98004900000002:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 Ok
security area backup saved: id.55FF3B51.[M438_26_26_05C_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_ 16_MP_V7.BIN_431C0E76].rpl
New firmware detected:
M438_26_26_05C_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_ 16_MP_V7.BIN
- make "Repair security area" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
identification#1 detection finished
device-id: 55FF3B51
identification#1 protocol ver: 04
ver. sw1: M438_26_26_05C_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_ 16_MP_V7.BIN
ver. sw2: MAUI.05C.W06.16.MP.V7
ffs offset/size: 00F00000/00100000
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00F00000
flash: 98004900000002:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
Detected eeprom/ffs address is non-standard: 00E00000
Posible reasons:
1. eeprom is Ok but address is non-standard
2. eeprom damaged and can't be detected
3. eeprom is Ok but detected incorrectly (f.e. unknown eeprom structure)
If you are not sure that detected address is correct:
1. press "NO" (and select standard address or terminate current operation)
2. make flash backup for emergency case
3. repeat required operation
Are you sure that detected eeprom address is correct ?
autodetected eeprom/ffs address[00E00000] confirmed by user
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
reading [eeprom[M438_26_26_05C_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_ 16_MP_V7.BIN]]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_eeprom[M438_26_26_05C_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_ 16_MP_V7.BIN]_20071207-162434.B0E.bin
flash: 98004900000002:29EA0000000000
Identification Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
formatting...
flash: 98004900000002:29EA0000000000
Write Done
file saved: backup_system_log_55FF3B51_M438_26_26_05C_PCB01_GP RS_MT6226_S01.MAUI_05C_W06_16_MP_V7.BIN_431C0E76_2 0071207-162449.B0X.bin
Finished, time used: 384 sec
Remove/Install battery now ! |