HI,
I have the above said handset and it is taking full flash and and taking complete formatting. But still the handset is dead. Its backup eeprom & flash file was following:-
CM_Y690_E553_Y15DBT799F8B_E553_GPRS_MT6226_S01.K79 9_Y15DBT799F8B_01_1_16m_En_Ru_Fr_Es_De_Th_Vn_Tr_Ar .B0M
backup_eeprom[E553_Y15DBT799F8B_E553_GPRS_MT6226_S01.K799_Y15DBT 799F8B_01_1.BIN]_20081207-130318.B0E
I flashed with the many firmwares of y690, complete formatted but still it is dead.
sometimes it blink for 1 second while formatting.
the logs are as under:
COM2 [VCP0] selected
module v2.70
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection disabled
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization/Language Pack
skip: Customization
write: Eeprom/ffs
Boot ...
Press and HOLD Power button now !
baud autodetection active
19200 autodetect
Connecting, wait...
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031
0C1:73FA
high speed boot Off
boot packet size: 0002
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung D 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung D 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud ...
460800
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
detect device identification#1...
detection phase #1...
.
detection phase #2...
.................................................. .................................................. ............................
warning: identification#1 information not found, possible reasons:
.old firmware type w/o identification#1 data
.damaged firmware
.damaged hardware
if phone works fine just ignore this warning
detect device identification#1 finished
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
detect device identification#1...
detection phase #1...
.
detection phase #2...
.................................................. .................................................. ............................
warning: identification#1 information not found, possible reasons:
.old firmware type w/o identification#1 data
.damaged firmware
.damaged hardware
if phone works fine just ignore this warning
detect device identification#1 finished
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
security area (code #1) calculation...
done
detecting security area (code #2)...
security area (code #2) is absent
Area: Firmware
flash: EC257E25082501:29EA0000000000
Write: Firmware
Area: Eeprom/ffs
flash: EC257E25082501:29EA0000000000
Write: Eeprom/ffs
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
Write Done
Finalization ...
Finalization Done
Finished, time used: 835 sec
Remove/Install battery now !
Please suggest what to do now
regards.