GSM-Forum - View Single Post

Risadaman · 08-05-2009, 19:48

Hi guys, i have a phone like this, it use mt6235, the name is iphone n2 3rd generation.
[IMG]http://image.******.com/upload/20096/77/ff8080811f69ef93011f7e03dbe1028a/productimg1245945937765.jpg[/IMG]

I kown nothing about programming, flashing, etc. the only thing that i ever did related was to upgrade the firmware of my palm treo 680.

I got two units and both have the same problem:

Looks like the calibration is wrong, so when i point the stylus in the middle of the screen, the spot activated in the screen is right in the same position, but if i try to click upward, down, or to the sides of the screen, the spot of the screen activated is veeery far from the point that i was really touching.

So botton an up sections of the screen where you have all the options (ok, back, numbers selecions in the bottom) are completly unacessible. I touch on them and the activated point on the screen is 1 centimiter away from it.

To fix this i decided to try to run the calibration from the menu, but unfortunately, it keeps asking to hit the mark on top-left and the bottom right, endlessly in a loop, and i cant finish the operation.

I started reading all about the phone, downloaded mtk tools, com driver for the phone, and was trying to somehow reset or get a new firmware to update, hoping to fix it.

But in one of the foruns that i visited i saw the phone security code, and from that i could reset it to factory settings, bingo, i managed to put the code on the phone and reseted it!

Alas, when the phone screen comes up again it is in uncopreensible chinese, AND the more serious problem.

BEFORE you may acess any phone funcion, such as for example select com port, usb drive, or any funcion of the phone, the screen calibration comes up, and you MUST do it before acessing any function of the phone, so im stuck in the same endless calibration screen

I cant understand the chinese, but the screen is the same that ask to calibrate the screen with the same reddots top-left and bottom right to click and calibrate, i clicked on them more than a 100 times and it keeps on this loop

Anybody know how to solve, fix this? This phone was for my wife and she spent 1 month trying to use it as it was, and im very dissapointed.

08-05-2009, 19:48	#1 (permalink)
Risadaman Junior Member Join Date: Aug 2009 Posts: 21 Member: 1090003 Status: Offline Thanks Meter: 0	iphone n2 mtk6235ba / mt6235 please help Hi guys, i have a phone like this, it use mt6235, the name is iphone n2 3rd generation. [IMG]http://image.******.com/upload/20096/77/ff8080811f69ef93011f7e03dbe1028a/productimg1245945937765.jpg[/IMG] I kown nothing about programming, flashing, etc. the only thing that i ever did related was to upgrade the firmware of my palm treo 680. I got two units and both have the same problem: Looks like the calibration is wrong, so when i point the stylus in the middle of the screen, the spot activated in the screen is right in the same position, but if i try to click upward, down, or to the sides of the screen, the spot of the screen activated is veeery far from the point that i was really touching. So botton an up sections of the screen where you have all the options (ok, back, numbers selecions in the bottom) are completly unacessible. I touch on them and the activated point on the screen is 1 centimiter away from it. To fix this i decided to try to run the calibration from the menu, but unfortunately, it keeps asking to hit the mark on top-left and the bottom right, endlessly in a loop, and i cant finish the operation. I started reading all about the phone, downloaded mtk tools, com driver for the phone, and was trying to somehow reset or get a new firmware to update, hoping to fix it. But in one of the foruns that i visited i saw the phone security code, and from that i could reset it to factory settings, bingo, i managed to put the code on the phone and reseted it! Alas, when the phone screen comes up again it is in uncopreensible chinese, AND the more serious problem. BEFORE you may acess any phone funcion, such as for example select com port, usb drive, or any funcion of the phone, the screen calibration comes up, and you MUST do it before acessing any function of the phone, so im stuck in the same endless calibration screen I cant understand the chinese, but the screen is the same that ask to calibrate the screen with the same reddots top-left and bottom right to click and calibrate, i clicked on them more than a 100 times and it keeps on this loop Anybody know how to solve, fix this? This phone was for my wife and she spent 1 month trying to use it as it was, and im very dissapointed.