Mc60 need help I am trying to flash mc60 siemens phone which came to me no power seems no hardware demages when i try to flash the phone it shows following errors
kindly some one guide me please.
--- Reading Info---------------------------------------------------------------
User selected phone MC60 using Test Point boot mode
Power On the phone ... OK
Hint : Please connect the probe with a button to testpoint
as shown in the description and wait.
Hint : Now the probe might be disconnected
Sending loader ... OK
Loading application ...OK
Testing RAM... OK
Error : #3140:00290253
[CFI Flash Chip Information]
JEDEC ID - 0000 ( 0000-0000 )
PRI Command Set - 0002 ( AMD / Fujitsu Standard )
PRI Ext. Offset - 0040
ALT Command Set - 0000 ( No Interface Specified )
ALT Ext. Offset - 0000
Minimum Vcc - 2.7 V
Maximum Vcc - 3.6 V
Minimum Vpp - chip has no Vpp pin
Maximum Vpp - chip has no Vpp pin
Typical Byte / Word Write Timeout - 128 mcs
Typical Full Buffer Write Timeout - 128 mcs
Typical Block Erase Timeout - 1024 ms
Typical Chip Erase Timeout - not supported
Maximum Byte / Word Write Timeout - 256 mcs
Maximum Full Buffer Write Timeout - 4096 mcs
Maximum Block Erase Timeout - 16384 ms
Maximum Chip Erase Timeout - not supported
Device Size - 1000000 (HEX) byte(s)
Bus Interface - 0002 ( x8 & x16 via BYTE# async. )
Maximum Multi-byte Write - 20 (HEX) byte(s)
Number of Erase Regions -
1) 0100 blocks of 010000 bytes
Flash Chip = ID : 00FA 0000 0000 0000 <unknown>
Error : #3140:00290219
Error : #3140:001D0390
Error : Invalid configuration please check model name
Error : #3140:001D0089
Error : #3140:002C017D
Error : Failed. |