GSM-Forum - View Single Post - RENEWED MCOMM GROUP AND ALCATEL WORKSHOP 5.0 LITE

Junior Flasher · 02-24-2002, 09:03

To Slawentiy<br />Cable shematic from you help and from Prolidi site, IMHO, contains error. As power suply, in RS232 can be apply only output: Pin 4 - DTR; pin7 - RTS and pin 3 - TD. Pin 8 - CTS is input. Therefore Diode, connected to pin 8, is non correct. This diode must be connected to pin 4 - DTR.

02-24-2002, 09:03	#13 (permalink)
Junior Flasher Junior Member Join Date: Jan 2002 Location: Europe Posts: 4 Member: 8231 Status: Offline Thanks Meter: 0	To Slawentiy<br />Cable shematic from you help and from Prolidi site, IMHO, contains error. As power suply, in RS232 can be apply only output: Pin 4 - DTR; pin7 - RTS and pin 3 - TD. Pin 8 - CTS is input. Therefore Diode, connected to pin 8, is non correct. This diode must be connected to pin 4 - DTR.