GSM-Forum - View Single Post - dopod S1 china need to convert to english

HAROON's · 02-23-2010, 10:33

instructions:
this is to flash any SPL: either update to hardspl this way or flash another spl over hardspl.
0. make sure your device is synced to activesync!!
1. Run the elf-uspl.exe from ELF CID Unlock HERE DOWNLOAD
2. Watch Screen and Press Enter When Asked.
3. Screen should Jump to White on Phone and on PC Flashing Loading Bar will Show.
4. Stuck in Black Ducky Loading Screen?, check Active Sync Connection or Do a hard reset on Phone first. But be sure to do the last Actual Flashing in White Screen. Sometimes this needs a few tries to go through white screen.
5. Done.

ENGLISH ROM FROM HERE

IMPORTANT: 2.26 and 2.28 are for both Elf and Elfin, but 3.07 and 3.10/3.14 sometimes don't work on 64mb Elf so if you have that device, test with USPL version first

BR

02-23-2010, 10:33	#4 (permalink)
HAROON's No Life Poster Join Date: Dec 2004 Location: Manama / BAHRAIN Posts: 1,665 Member: 100592 Status: Offline Sonork: 1578498 Thanks Meter: 245	instructions: this is to flash any SPL: either update to hardspl this way or flash another spl over hardspl. 0. make sure your device is synced to activesync!! 1. Run the elf-uspl.exe from ELF CID Unlock HERE DOWNLOAD 2. Watch Screen and Press Enter When Asked. 3. Screen should Jump to White on Phone and on PC Flashing Loading Bar will Show. 4. Stuck in Black Ducky Loading Screen?, check Active Sync Connection or Do a hard reset on Phone first. But be sure to do the last Actual Flashing in White Screen. Sometimes this needs a few tries to go through white screen. 5. Done. ENGLISH ROM FROM HERE IMPORTANT: 2.26 and 2.28 are for both Elf and Elfin, but 3.07 and 3.10/3.14 sometimes don't work on 64mb Elf so if you have that device, test with USPL version first BR