Originally Posted by alifahad  do this
1. Switch On Phone and Connect USB Cable.
2. Select ssm1 port in [Interface] ComboBox.
3. Press [Info] button, will see info like this:
Phone Must be with Battery and Powered On !
Software: B3210XXII4
Regions : Austria,Benelux,France,Germany,Hungary,Italy,Spain ,UK
Language: de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr )
Release : 2009 September Rev: 4
CSC Vers: B3210OXAII4
Regions : Austria,France,Germany,Italy,Netherlands,Switzerla nd,UK
Language: de,en,es,fr,it,nl,pt,tr
Release : 2009 September Rev: 4
Hardware: MP 0.601
IMEI: 358628-03-099690-0
BT Address: c87e75-cb4abb
Lock Level: 00 [Not Locked]
MSL : Active
S/N : RD3SC79975
To Make MSL Bypass in USB Mode, Use [Repair MSL] at first !
(not need to Write E2P or MCU )
Locks: Error
4. Disconnect USB cable, Switch Off Phone.
5. Enter Phone to USB Download Mode (Hold * button and insert Cable)
6. Select ssm0 port in [Interface] ComboBox.
7. Press [Repair MSL] button, software will ask about S/N,
make sure is same as see in Info. Not need write any MCU or E2P files.
Using MSL S/N: RD3SC79975
USB Boot Ok, McuId: 00050015, Ubl: BC8906B3, 7-1.1 (Vision X115E)
Fll Boot Ok, Vers: 5.22, fl_sceptreeg_vx100_eval_usb_s06_t.sre
Flash1: Fl_Id: 00890000_88B00000 - Intel SIBLEY 1024
Flash2: Fl_Id: 00890000_88B00000 - Intel SIBLEY 1024
Read Done, St: 0x23FC0000, 262144 byte(s), Time: 00:01, 0
Flashing NOR part...
Write Done, 262160 byte(s), Time: 00:01
8. Disconnect USB cable, Switch On Phone.
9. Select ssm1 port in [Interface] ComboBox.
10. Press [Info] button, will see info like this:
Phone Must be with Battery and Powered On !
Software: B3210XXII4
Regions : Austria,Benelux,France,Germany,Hungary,Italy,Spain ,UK
Language: de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr )
Release : 2009 September Rev: 4
CSC Vers: B3210OXAII4
Regions : Austria,France,Germany,Italy,Netherlands,Switzerla nd,UK
Language: de,en,es,fr,it,nl,pt,tr
Release : 2009 September Rev: 4
Hardware: MP 0.601
IMEI: 358628-03-099690-0
BT Address: c87e75-cb4abb
Lock Level: 00 [Not Locked]
MSL : Active
S/N : RD3SC79975
MSL : Deactivated
PCK : 00000000 [#0141*00000000#]
NCK : 00000000 [#0111*00000000#]
SCK : 00000000 [#0121*00000000#]
SPCK: 00000000 [#0133*00000000#]
MCK : 15234981 [#0111*15234981#]
11. Now can use Unlock Codes or do any other Operations
(Repair IMEI, etc.) Phone not need anymore to [Repair MSL] |