Quote:
Originally Posted by InfinitySupport  Hello,
What is your "same" problem exactly ?
Post here problem description and software operation log text. |
..hello...slt100 with master code...
..flash stop at 3% 10 or 26 %...battery full
29 [VCP0] selected
module v4.43
Device: Fly-SLT100
Checking data, wait...
Action: write flash NAND
write: Firmware
Fly-SLT100_Hummer-HT1_SLT100_HMERID_PCB04_GPRS_MT6228_S02.MAUI_06A_W 06_36_MP_V36_M3.00R_2007-07-26_En_Ru_Ua.B4M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
nfi area detection...
external bootloader is not present
bootloader version: SLT100_HMERID_BOOTLOADER_V005_MT6228_MAUI_06A_W06_ 36_MP_V36.bin
nfi area detection (2 cores) finished: Ok
interface: BROM_DLL_v3.1108.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6228:8A02:8A02
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0017]: 00AD:007600AD0076 [HYNIX] HY27XS08121M
chip size: 64Mb
page/spare size: 0200/0010
pages per block: 0020
bits i/o: 08
address cycles: 04
internal RAM size: 00020000
external RAM: absent
done
Set baudrate (921600)...
done
ram test (40000000)...
testing 32bit...
32bit ram test passed
testing 16bit...
16bit ram test passed
ram test passed
===> detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/02000000
firmware size: 32Mb
ffs size: 32Mb
detect sec ro...
error:0BF9:S_DA_HANDSET_SEC_INFO_NOT_FOUND
detect custom parameters...
error:0401:S_CUST_PARA_NOT_SUPPORTED
detect project-id...
project-id: MAUI.06A.W06.36.MP.V25
detect NAND info...
number of areas/bytes to read: 1:00010000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
external bootloader is not present
bootloader version: SLT100_MLAB_BOOTLOADER_V005_MT6228_MAUI_06A_W06_36 _MP_V25.bin
warning: id-page1 area is invalid
nfi area detection (0 cores) finished: failed
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 04
sw version: SLT100_MLAB_PCB04_GPRS_MT6228_S02.MAUI_06A_W06_36_ MP_V25.BIN
project-id: MAUI.06A.W06.36.MP.V25, 00000000
code offset: 00000000
ffs offset/size [01]: 02000000/02000000
rom info structure: [standard] type (04)
TCL-ID is absent
===> done
nfi area detection...
external bootloader is not present
bootloader version: SLT100_HMERID_BOOTLOADER_V005_MT6228_MAUI_06A_W06_ 36_MP_V36.bin
nfi area detection (2 cores) finished: Ok
startup code area #1 check...
done
number of cores: 2
loading files...
number of areas: 2
done
write...
write bootloader...
.
write core...
error: can not write flash (4): 0FAF:S_FT_NFB_DOWNLOAD_CODE_FAIL
error: last error: 0FAF:S_FT_NFB_DOWNLOAD_CODE_FAIL
Disconnect...
done
Finished, time used: 1 min 17 sec
Remove/Install battery now !