[Parash]

CWM recovery for walton primo H1



# Install driver
Driver installation

1) Install AP part driver
Power off handset, press “Power key + Voice Up key” until the screen shows green, plug in usb cable, PC will remind you of installing new hardware. Unzip “ Driver”, select adb driver file, install AP driver.

Path: Right click on My computer>Manage>Device manager>Android(Yellow notification)>Update driver software>browse path> select adb folder >Continue anyway>finish
When you install AP driver successfully, you will find “Fastboot interface” in device manager.

2) Install BP part driver

(i) Power off handset, press “Power key + Voice down key” until the screen shows QPST mode, plug in 5Pin USB cable, Unzip “Driver”, select HK11-VB717-27_1.0.56 driver file, install BP driver.
Path: Right click on My computer>Manage>Device manager>Tiyanyu HS-USB Driver (Yellow notification)>Update driver software>browse path> HK11-VB717-27_1.0.56\Win32\x86\free >Continue anyway>finish.
(ii) When your BP driver is installed successfully, you will find Qualcomm HS-USB ports in device manager.

2nd step: download ” recovery.img “ and “Android AIO Flasher” file from here
4. Go to Fastboot mode in your phone by pressing Volume up + power key together ( Green Screen)
5. Connect your phone into PC via USB cable
3. Open “Android AIO Flasher”



5. Select recovery > Select file > Flash
Done!!! CWM recovery is successfully installed in your Walton Primo H1


BR.