GSM-Forum - View Single Post

keiko909 · 09-13-2013, 19:34

im trying to flash a nokia lumia 800 stuck on the nokia logo. when i try to flash i get an error:

Establishing Connection with Box in Main Mode...
Handling device: [Cyclone Team], [Cyclone Bootloader], [Platform: Classic]
Handling device: [Cyclone Team], [Cyclone Box], [Platform: Classic]
Initializing box...
Box Firmware: Cyclone Main Application v02.20, (Aug 6 2013 20:31:40, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2012
Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs
Box Serial Number: C0002B71
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2009, wk32
Initializing security card...
Card Serial Number: DA0000D1
Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 4.96v PASSED
MCU Voltage 3.31v PASSED
Core Voltage 1.79v PASSED
VBAT Voltage 0.01v PASSED
VBAT Voltage 4.88v PASSED
Box VPP disabled
VPP Voltage 0.02v PASSED
Internal Box VPP Enabled
VPP Voltage 4.79v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
External Box VPP Enabled
VPP Voltage 0.02v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE
XGold/Blackberry Service Running, Counter: 100
Lumia No TP is NOT ACTIVATED! (1)
Avaiable Physical Memory: 2.716GB
Avaiable Virtual Memory: 1.793GB
Avaiable Pagefile: 3.1023GB
Initializing FBUS...
All initialized - Ready to work
Scanning avaiable products...
Processing C:\Program Files (x86)\Cyclone Box\StoredFiles\LandingZone\...
Processing C:\ProgramData\Nokia\Packages\Products\...
Processing E:\Nokia firmware files\RM-596-11.5-scandinavia\...
Found 5 products, Filtering BB5 Products - wait...
3 Products left after filtering. Ready.
Retrieving Variants for Product RM-801 - wait...
3 Variants Retrieved

If phone is alive, It will be automatically swithced to OSBL mode.
If software can't switch to OSBL mode, or phone is generally DEAD do folllowing:

1. Turn OFF device, wait 15 seconds afterwards
2. Eject USB cable, wait 10 seconds
3. Press and hold Volume-UP button
4. Insert USB Cable. OSBL should be booted.

Booting CMT...
[Nokia USB Connectivity]: WinUSB Port opened OK!
OSBL Bootloader Kick Failed -> WinUSB Exchange Problem
Failed to Boot CMT -> Failed to get First Boot Block
Prepare phone failed with message -> Failed to Boot CMT
Process ESCO Image Failed -> Failed to Boot OSBL
Failed to Flash WP7 -> Failed to Flash All ESCO Images

does anybody know how to get around this problem?

09-13-2013, 19:34	#1 (permalink)
keiko909 Freak Poster Join Date: Jan 2006 Posts: 247 Member: 219366 Status: Offline Thanks Meter: 15	lumia 800 flashing problem im trying to flash a nokia lumia 800 stuck on the nokia logo. when i try to flash i get an error: Establishing Connection with Box in Main Mode... Handling device: [Cyclone Team], [Cyclone Bootloader], [Platform: Classic] Handling device: [Cyclone Team], [Cyclone Box], [Platform: Classic] Initializing box... Box Firmware: Cyclone Main Application v02.20, (Aug 6 2013 20:31:40, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2012 Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs Box Serial Number: C0002B71 HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2009, wk32 Initializing security card... Card Serial Number: DA0000D1 Card Firmware Revision: 0109 Card is activated Box is activated Started box selftests procedure USB Voltage 4.96v PASSED MCU Voltage 3.31v PASSED Core Voltage 1.79v PASSED VBAT Voltage 0.01v PASSED VBAT Voltage 4.88v PASSED Box VPP disabled VPP Voltage 0.02v PASSED Internal Box VPP Enabled VPP Voltage 4.79v PASSED Box VPP disabled VPP Voltage 0.04v PASSED External Box VPP Enabled VPP Voltage 0.02v FAILED - IGNORED - Probably power supply is not connected Box VPP disabled All box selftests passed! Super DCT4 Activation: TRUE XGold/Blackberry Service Running, Counter: 100 Lumia No TP is NOT ACTIVATED! (1) Avaiable Physical Memory: 2.716GB Avaiable Virtual Memory: 1.793GB Avaiable Pagefile: 3.1023GB Initializing FBUS... All initialized - Ready to work Scanning avaiable products... Processing C:\Program Files (x86)\Cyclone Box\StoredFiles\LandingZone\... Processing C:\ProgramData\Nokia\Packages\Products\... Processing E:\Nokia firmware files\RM-596-11.5-scandinavia\... Found 5 products, Filtering BB5 Products - wait... 3 Products left after filtering. Ready. Retrieving Variants for Product RM-801 - wait... 3 Variants Retrieved If phone is alive, It will be automatically swithced to OSBL mode. If software can't switch to OSBL mode, or phone is generally DEAD do folllowing: 1. Turn OFF device, wait 15 seconds afterwards 2. Eject USB cable, wait 10 seconds 3. Press and hold Volume-UP button 4. Insert USB Cable. OSBL should be booted. Booting CMT... [Nokia USB Connectivity]: WinUSB Port opened OK! OSBL Bootloader Kick Failed -> WinUSB Exchange Problem Failed to Boot CMT -> Failed to get First Boot Block Prepare phone failed with message -> Failed to Boot CMT Process ESCO Image Failed -> Failed to Boot OSBL Failed to Flash WP7 -> Failed to Flash All ESCO Images does anybody know how to get around this problem?