🐙 Post here success Reset FRP story with Octoplus FRP Tool - Page 346 - GSM-Forum

pedro7208 · 11-26-2019, 15:57

Huawei Y5 2019 android 9.1.0 done!!!

Code:

Welcome to Octoplus FRP Tool v.1.8.3.0
Platform: HUAWEI
Selected model: AMN-LX9
Put the phone into Brom mode: 
1. Attach testpoint as shown in Help manual; 
2. Connect USB cable; 
3. Release testpoint after 3-5 seconds.
Searching for a phone. Please wait...
Found phone on COM6
Port name: MediaTek USB Port (COM6)
Detecting Chip Version...
HW Chip: MT6761: 0717.0000
HW Version: 8A00.CA01.0200.0000
Connecting...
Brom Version: 05
BootLoader Version: FE
Sending auth...
Sending Auth Data...
Target Config: 0x000000E5
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018/10/18.17:38_452898, n.1
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: brom
Sending BootLoader Info...
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 15028 Mb
eMMC Flash: .90014A48.41473461.32D4C7A0.4AB02625
eMMC Flash: Hynix: HAG4a2
Internal RAM size: 512 Kb
External RAM size: 2048 Mb
Reading partition...
Reading info...
Android version: 9
Display ID: System 9.1.0.040(05QC)
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as HUAWEI_AMN-LX9_26-11-2019_15-49-13.dump file
Performed by 1.8.3.0 Software version.

Yahia_Sb · 11-26-2019, 16:16

Welcome to Octoplus FRP Tool v.1.8.3.0
Platform: WALTON
Selected model: PRIMO R5
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM11
Port name: MediaTek PreLoader USB VCOM_V1632 (Android) (COM11)
Detecting Chip Version...
HW Chip: MT6739: 0699.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 03
Sending auth...
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.21
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: preloader
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 15028 Mb
eMMC Flash: .90014A48.41473461.32A5097B.B42975B1
eMMC Flash: Hynix: HAG4a2
Internal RAM size: 128 Kb
External RAM size: 2048 Mb
Reading partition...
Reading info...
Brand: WALTON
Model: Primo R5
Device: Primo_R5
Android version: 8.1.0
Display ID: O11019 release-keys
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as WALTON_Primo R5_26-11-2019_21-13-45.dump file
Performed by 1.8.3.0 Software version.

Yahia_Sb · 11-26-2019, 16:16

Welcome to Octoplus FRP Tool v.1.8.3.0
Platform: WALTON
Selected model: PRIMO R5
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM11
Port name: MediaTek PreLoader USB VCOM_V1632 (Android) (COM11)
Detecting Chip Version...
HW Chip: MT6739: 0699.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 03
Sending auth...
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.21
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: preloader
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 15028 Mb
eMMC Flash: .90014A48.41473461.32A5097B.B42975B1
eMMC Flash: Hynix: HAG4a2
Internal RAM size: 128 Kb
External RAM size: 2048 Mb
Reading partition...
Reading info...
Brand: WALTON
Model: Primo R5
Device: Primo_R5
Android version: 8.1.0
Display ID: O11019 release-keys
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as WALTON_Primo R5_26-11-2019_21-13-45.dump file
Performed by 1.8.3.0 Software version.

apacheadmiral · 11-26-2019, 19:08

Welcome to Octoplus FRP Tool v.1.8.3.0
Platform: HUAWEI
Selected model: PRA-LA1
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: PRA-LA1
Phone SN: BGV7N17603000551
Phone IMEI: 863162030102788
Phone IMEI2: 000000000000000
SW version: PRA-LA1 8.0.0.398(C185)
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.8.3.0 Software version.

apacheadmiral · 11-26-2019, 19:11

Welcome to Octoplus FRP Tool v.1.8.3.0
Platform: HISENSE
Selected model: U601S
Please, power phone OFF, press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM17
Connecting...
Mobile Status: SPRD3
Sending preloader...
Mobile Status: Spreadtrum Boot Block version 1.1
Sending mainloader...
Reading info...
Brand: Hisense
Model: Hisense U601S
Device: HS7731CSP
Platform: sc8830
Android version: 7.0
Display ID: Hisense_U601S_10_S01_20180719
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Hisense_Hisense U601S_26-11-2019_20-10-25.dump file
Performed by 1.8.3.0 Software version.

apacheadmiral · 11-26-2019, 19:11

Welcome to Octoplus FRP Tool v.1.8.3.0
Platform: HISENSE
Selected model: U601S
Please, power phone OFF, press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM17
Connecting...
Mobile Status: SPRD3
Sending preloader...
Mobile Status: Spreadtrum Boot Block version 1.1
Sending mainloader...
Reading info...
Brand: Hisense
Model: Hisense U601S
Device: HS7731CSP
Platform: sc8830
Android version: 7.0
Display ID: Hisense_U601S_10_S01_20180719
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Hisense_Hisense U601S_26-11-2019_20-10-25.dump file
Performed by 1.8.3.0 Software version.

apacheadmiral · 11-26-2019, 19:31

Welcome to Octoplus FRP Tool v.1.8.3.0
Platform: MOBICEL
Selected model: ASTRO
Please, power phone OFF, press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM17
Connecting...
Mobile Status: SPRD3
Sending preloader...
Mobile Status: Spreadtrum Boot Block version 1.1
Sending mainloader...
Reading info...
Brand: Mobicel
Model: ASTRO
Device: ASTRO
Android version: 8.1.0
Custom build version: Mobicel_ASTRO_8.1_MTN_ZA_18
Internal build version: K101BG_8.1_MCL_MTN_ZA_SECOND_03
Display ID: OPM2.171019.012 release-keys
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Mobicel_ASTRO_26-11-2019_20-30-58.dump file
Performed by 1.8.3.0 Software version.

apacheadmiral · 11-26-2019, 19:32

Welcome to Octoplus FRP Tool v.1.8.3.0
Platform: MOBICEL
Selected model: ASTRO
Please, power phone OFF, press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM17
Connecting...
Mobile Status: SPRD3
Sending preloader...
Mobile Status: Spreadtrum Boot Block version 1.1
Sending mainloader...
Reading info...
Brand: Mobicel
Model: ASTRO
Device: ASTRO
Android version: 8.1.0
Custom build version: Mobicel_ASTRO_8.1_MTN_ZA_18
Internal build version: K101BG_8.1_MCL_MTN_ZA_SECOND_03
Display ID: OPM2.171019.012 release-keys
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Mobicel_ASTRO_26-11-2019_20-30-58.dump file
Performed by 1.8.3.0 Software version.

Takeda93 · 11-26-2019, 20:16

Log file "C:\Program Files (x86)\Octoplus\Octoplus_FRP_Tool\LOG\25-11-2019_16-25-51.log" created (11/25/2019 4:25:53 PM).
INFO : 11/25/2019 4:26:11 PM > Welcome to Octoplus FRP Tool v.1.8.3.0
INFO : 11/25/2019 4:27:05 PM > Platform: HUAWEI
INFO : 11/25/2019 4:27:05 PM > Selected model: ANE-LX2
WARN : 11/25/2019 4:27:05 PM > Put the phone into Factory mode:
WARN : 11/25/2019 4:27:05 PM > 1. Attach testpoint as shown in Help manual;
WARN : 11/25/2019 4:27:05 PM > 2. Connect USB cable;
WARN : 11/25/2019 4:27:05 PM > 3. Release testpoint.
INFO : 11/25/2019 4:27:05 PM > Searching for a phone. Please wait...
INFO : 11/25/2019 4:27:05 PM > Found phone on COM14
INFO : 11/25/2019 4:27:05 PM > Checking resource files...
INFO : 11/25/2019 4:27:08 PM > Downloading resources...
INFO : 11/25/2019 4:27:16 PM > Searching for a phone. Please wait...
INFO : 11/25/2019 4:27:16 PM > Found phone on COM14
INFO : 11/25/2019 4:27:16 PM > Setting options...
INFO : 11/25/2019 4:27:16 PM > Writing BOOT...
INFO : 11/25/2019 4:27:30 PM > Switching to FastBoot mode...
INFO : 11/25/2019 4:27:34 PM > Searching for a phone. Please wait...
INFO : 11/25/2019 4:27:34 PM > Detected phone model: ANE-LX2
INFO : 11/25/2019 4:27:34 PM > Phone SN: WCY4C18C25007468
INFO : 11/25/2019 4:27:34 PM > Phone IMEI: 86154xxxx
INFO : 11/25/2019 4:27:34 PM > Phone IMEI2: 86154xxxx
INFO : 11/25/2019 4:27:34 PM > SW version: ANE-LX2 9.1.0.229(C605E4R1P3)
WARN : 11/25/2019 4:27:34 PM > FRP lock is successfully reseted!
INFO : 11/25/2019 4:27:35 PM > Performed by 1.8.3.0 Software version.
INFO : 11/25/2019 4:27:35 PM >
Log file "C:\Program Files (x86)\Octoplus\Octoplus_FRP_Tool\LOG\25-11-2019_16-25-51.log" closed (11/25/2019 4:34:38 PM).

djmurod86 · 11-27-2019, 06:34

Welcome to Octoplus FRP Tool v.1.8.3.0
Platform: __GENERAL RESET FRP METHODS
Selected model: MTK GENERAL
Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM6
Port name: MediaTek PreLoader USB VCOM (Android) (COM6)
Detecting Chip Version...
HW Chip: MT6737: 0335.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.10
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .88010345.50423130.3028FDC8.3360D89B
eMMC Flash: Foresee: EPB100
DA ver: 4.2.9B
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7393 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: Stark
Model: Impress_Noda
Device: Impress_Noda
Platform: mt6735m
Android version: 6.0
Display ID: R1.V02.NODA
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Stark_Impress_Noda_27-11-2019_10-27-27.dump file
Performed by 1.8.3.0 Software version.

GolfGSM · 11-27-2019, 07:35

Welcome to Octoplus FRP Tool v.1.8.3.0
Platform: HUAWEI
Selected model: LDN-LX2
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: LDN-LX2
Phone SN: JYNBB18513158185
Phone IMEI: 869572039200215
SW version: LDN-LX2 8.0.0.158(C636)
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.8.3.0 Software version.

apacheadmiral · 11-27-2019, 13:22

Platform: HUAWEI
Selected model: PRA-LA1
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: PRA-LA1
Phone SN: PSEDU17B17000731
Phone IMEI: 867372031793883
Phone IMEI2: 867372031801884
SW version: PRA-LA1 8.0.0.405(C185)
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.8.3.0 Software version.

apacheadmiral · 11-27-2019, 13:23

Platform: HISENSE
Selected model: F24
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM37
Port name: MediaTek PreLoader USB VCOM (Android) (COM37)
Detecting Chip Version...
HW Chip: MT6735: 0321.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_byOctoplus_Hisense_v.1, n.0
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010051.4536334D.4203BE97.D808024B
eMMC Flash: Samsung: QE63MB
DA ver: 4.2.93
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 14910 Mb
Internal RAM size: 128 Kb
External RAM size: 2048 Mb
Reading partition...
Reading info...
Brand: Hisense
Model: Hisense F24
Device: HS6737MT
Platform: mt6737t
Android version: 7.0
Display ID: NRD90M release-keys
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Hisense_Hisense F24_27-11-2019_13-47-34.dump file
Performed by 1.8.3.0 Software version

apacheadmiral · 11-27-2019, 13:23

Platform: HISENSE
Selected model: F24
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM37
Port name: MediaTek PreLoader USB VCOM (Android) (COM37)
Detecting Chip Version...
HW Chip: MT6735: 0321.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_byOctoplus_Hisense_v.1, n.0
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010051.4536334D.4203BE97.D808024B
eMMC Flash: Samsung: QE63MB
DA ver: 4.2.93
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 14910 Mb
Internal RAM size: 128 Kb
External RAM size: 2048 Mb
Reading partition...
Reading info...
Brand: Hisense
Model: Hisense F24
Device: HS6737MT
Platform: mt6737t
Android version: 7.0
Display ID: NRD90M release-keys
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Hisense_Hisense F24_27-11-2019_13-47-34.dump file
Performed by 1.8.3.0 Software version

apacheadmiral · 11-27-2019, 13:31

Platform: MOBICEL
Selected model: DANDY
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM37
Port name: MediaTek PreLoader USB VCOM (Android) (COM37)
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_Octoplus_Mobicel_v.1, n.0
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .90014A48.38473461.32A55644.DA145493
eMMC Flash: Hynix: H8G4a2
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: Mobicel
Model: DANDY
Device: DANDY
Platform: mt6580
Android version: 7.0
Display ID: alps-mp-n0.mp2-V1_tinno6580.we.n_P144
Factory Reset...
Formating User Data section
Factory Reset is successfully performed!
Backup saved as Mobicel_DANDY_27-11-2019_13-46-13.dump file
Performed by 1.8.3.0 Software version.

11-26-2019, 16:16	#5177 (permalink)
Yahia_Sb No Life Poster Join Date: Aug 2014 Posts: 658 Member: 2233266 Status: Offline Thanks Meter: 252	Welcome to Octoplus FRP Tool v.1.8.3.0 Platform: WALTON Selected model: PRIMO R5 Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM11 Port name: MediaTek PreLoader USB VCOM_V1632 (Android) (COM11) Detecting Chip Version... HW Chip: MT6739: 0699.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 03 Sending auth... Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.21 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... Mobile Status: SYNC Mobile Status: preloader Initializing Memory Flash.. Initialization successfully completed Sending loaders... Mobile Status: SYNC Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 15028 Mb eMMC Flash: .90014A48.41473461.32A5097B.B42975B1 eMMC Flash: Hynix: HAG4a2 Internal RAM size: 128 Kb External RAM size: 2048 Mb Reading partition... Reading info... Brand: WALTON Model: Primo R5 Device: Primo_R5 Android version: 8.1.0 Display ID: O11019 release-keys Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as WALTON_Primo R5_26-11-2019_21-13-45.dump file Performed by 1.8.3.0 Software version.

11-26-2019, 16:16	#5178 (permalink)
Yahia_Sb No Life Poster Join Date: Aug 2014 Posts: 658 Member: 2233266 Status: Offline Thanks Meter: 252	Welcome to Octoplus FRP Tool v.1.8.3.0 Platform: WALTON Selected model: PRIMO R5 Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM11 Port name: MediaTek PreLoader USB VCOM_V1632 (Android) (COM11) Detecting Chip Version... HW Chip: MT6739: 0699.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 03 Sending auth... Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.21 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... Mobile Status: SYNC Mobile Status: preloader Initializing Memory Flash.. Initialization successfully completed Sending loaders... Mobile Status: SYNC Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 15028 Mb eMMC Flash: .90014A48.41473461.32A5097B.B42975B1 eMMC Flash: Hynix: HAG4a2 Internal RAM size: 128 Kb External RAM size: 2048 Mb Reading partition... Reading info... Brand: WALTON Model: Primo R5 Device: Primo_R5 Android version: 8.1.0 Display ID: O11019 release-keys Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as WALTON_Primo R5_26-11-2019_21-13-45.dump file Performed by 1.8.3.0 Software version.

11-26-2019, 19:08	#5179 (permalink)
apacheadmiral No Life Poster Join Date: Apr 2008 Location: South Africa Posts: 708 Member: 746586 Status: Offline Thanks Meter: 205	Welcome to Octoplus FRP Tool v.1.8.3.0 Platform: HUAWEI Selected model: PRA-LA1 Put the phone in FastBoot Mode: 1. Remove SD and SIM cards from the phone 2. Power phone OFF 3. Press and hold "Vol-" and insert USB cable 4. Wait until the phone enter in FastBoot Mode Searching for a phone. Please wait... Detected phone model: PRA-LA1 Phone SN: BGV7N17603000551 Phone IMEI: 863162030102788 Phone IMEI2: 000000000000000 SW version: PRA-LA1 8.0.0.398(C185) Connecting to server..OK Authorizing...OK Resetting FRP lock.. If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually. FRP lock is successfully reseted! Performed by 1.8.3.0 Software version.

11-26-2019, 19:11	#5180 (permalink)
apacheadmiral No Life Poster Join Date: Apr 2008 Location: South Africa Posts: 708 Member: 746586 Status: Offline Thanks Meter: 205	Welcome to Octoplus FRP Tool v.1.8.3.0 Platform: HISENSE Selected model: U601S Please, power phone OFF, press and hold "Vol+" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM17 Connecting... Mobile Status: SPRD3 Sending preloader... Mobile Status: Spreadtrum Boot Block version 1.1 Sending mainloader... Reading info... Brand: Hisense Model: Hisense U601S Device: HS7731CSP Platform: sc8830 Android version: 7.0 Display ID: Hisense_U601S_10_S01_20180719 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as Hisense_Hisense U601S_26-11-2019_20-10-25.dump file Performed by 1.8.3.0 Software version.

11-26-2019, 19:11	#5181 (permalink)
apacheadmiral No Life Poster Join Date: Apr 2008 Location: South Africa Posts: 708 Member: 746586 Status: Offline Thanks Meter: 205	Welcome to Octoplus FRP Tool v.1.8.3.0 Platform: HISENSE Selected model: U601S Please, power phone OFF, press and hold "Vol+" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM17 Connecting... Mobile Status: SPRD3 Sending preloader... Mobile Status: Spreadtrum Boot Block version 1.1 Sending mainloader... Reading info... Brand: Hisense Model: Hisense U601S Device: HS7731CSP Platform: sc8830 Android version: 7.0 Display ID: Hisense_U601S_10_S01_20180719 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as Hisense_Hisense U601S_26-11-2019_20-10-25.dump file Performed by 1.8.3.0 Software version.

11-26-2019, 19:31	#5182 (permalink)
apacheadmiral No Life Poster Join Date: Apr 2008 Location: South Africa Posts: 708 Member: 746586 Status: Offline Thanks Meter: 205	Welcome to Octoplus FRP Tool v.1.8.3.0 Platform: MOBICEL Selected model: ASTRO Please, power phone OFF, press and hold "Vol+" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM17 Connecting... Mobile Status: SPRD3 Sending preloader... Mobile Status: Spreadtrum Boot Block version 1.1 Sending mainloader... Reading info... Brand: Mobicel Model: ASTRO Device: ASTRO Android version: 8.1.0 Custom build version: Mobicel_ASTRO_8.1_MTN_ZA_18 Internal build version: K101BG_8.1_MCL_MTN_ZA_SECOND_03 Display ID: OPM2.171019.012 release-keys Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as Mobicel_ASTRO_26-11-2019_20-30-58.dump file Performed by 1.8.3.0 Software version.

11-26-2019, 19:32	#5183 (permalink)
apacheadmiral No Life Poster Join Date: Apr 2008 Location: South Africa Posts: 708 Member: 746586 Status: Offline Thanks Meter: 205	Welcome to Octoplus FRP Tool v.1.8.3.0 Platform: MOBICEL Selected model: ASTRO Please, power phone OFF, press and hold "Vol+" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM17 Connecting... Mobile Status: SPRD3 Sending preloader... Mobile Status: Spreadtrum Boot Block version 1.1 Sending mainloader... Reading info... Brand: Mobicel Model: ASTRO Device: ASTRO Android version: 8.1.0 Custom build version: Mobicel_ASTRO_8.1_MTN_ZA_18 Internal build version: K101BG_8.1_MCL_MTN_ZA_SECOND_03 Display ID: OPM2.171019.012 release-keys Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as Mobicel_ASTRO_26-11-2019_20-30-58.dump file Performed by 1.8.3.0 Software version.

11-27-2019, 06:34	#5185 (permalink)
djmurod86 No Life Poster Join Date: Feb 2007 Location: Inside Posts: 4,133 Member: 455852 Status: Offline Sonork: 100.1596308 Thanks Meter: 1,993	Welcome to Octoplus FRP Tool v.1.8.3.0 Platform: __GENERAL RESET FRP METHODS Selected model: MTK GENERAL Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM6 Port name: MediaTek PreLoader USB VCOM (Android) (COM6) Detecting Chip Version... HW Chip: MT6737: 0335.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.10 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .88010345.50423130.3028FDC8.3360D89B eMMC Flash: Foresee: EPB100 DA ver: 4.2.9B Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 7393 Mb Internal RAM size: 128 Kb External RAM size: 1024 Mb Reading partition... Reading info... Brand: Stark Model: Impress_Noda Device: Impress_Noda Platform: mt6735m Android version: 6.0 Display ID: R1.V02.NODA Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as Stark_Impress_Noda_27-11-2019_10-27-27.dump file Performed by 1.8.3.0 Software version.

11-27-2019, 07:35	#5186 (permalink)
GolfGSM Freak Poster Join Date: Aug 2019 Location: GuanGzhou-China Posts: 412 Member: 2924041 Status: Offline Thanks Meter: 142	Welcome to Octoplus FRP Tool v.1.8.3.0 Platform: HUAWEI Selected model: LDN-LX2 Put the phone in FastBoot Mode: 1. Remove SD and SIM cards from the phone 2. Power phone OFF 3. Press and hold "Vol-" and insert USB cable 4. Wait until the phone enter in FastBoot Mode Searching for a phone. Please wait... Detected phone model: LDN-LX2 Phone SN: JYNBB18513158185 Phone IMEI: 869572039200215 SW version: LDN-LX2 8.0.0.158(C636) Connecting to server..OK Authorizing...OK Resetting FRP lock.. If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually. FRP lock is successfully reseted! Performed by 1.8.3.0 Software version.

11-27-2019, 13:22	#5187 (permalink)
apacheadmiral No Life Poster Join Date: Apr 2008 Location: South Africa Posts: 708 Member: 746586 Status: Offline Thanks Meter: 205	Platform: HUAWEI Selected model: PRA-LA1 Put the phone in FastBoot Mode: 1. Remove SD and SIM cards from the phone 2. Power phone OFF 3. Press and hold "Vol-" and insert USB cable 4. Wait until the phone enter in FastBoot Mode Searching for a phone. Please wait... Detected phone model: PRA-LA1 Phone SN: PSEDU17B17000731 Phone IMEI: 867372031793883 Phone IMEI2: 867372031801884 SW version: PRA-LA1 8.0.0.405(C185) Connecting to server..OK Authorizing...OK Resetting FRP lock.. If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually. FRP lock is successfully reseted! Performed by 1.8.3.0 Software version.

11-27-2019, 13:23	#5188 (permalink)
apacheadmiral No Life Poster Join Date: Apr 2008 Location: South Africa Posts: 708 Member: 746586 Status: Offline Thanks Meter: 205	Platform: HISENSE Selected model: F24 Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM37 Port name: MediaTek PreLoader USB VCOM (Android) (COM37) Detecting Chip Version... HW Chip: MT6735: 0321.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_byOctoplus_Hisense_v.1, n.0 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .15010051.4536334D.4203BE97.D808024B eMMC Flash: Samsung: QE63MB DA ver: 4.2.93 Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 14910 Mb Internal RAM size: 128 Kb External RAM size: 2048 Mb Reading partition... Reading info... Brand: Hisense Model: Hisense F24 Device: HS6737MT Platform: mt6737t Android version: 7.0 Display ID: NRD90M release-keys Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as Hisense_Hisense F24_27-11-2019_13-47-34.dump file Performed by 1.8.3.0 Software version

11-27-2019, 13:23	#5189 (permalink)
apacheadmiral No Life Poster Join Date: Apr 2008 Location: South Africa Posts: 708 Member: 746586 Status: Offline Thanks Meter: 205	Platform: HISENSE Selected model: F24 Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM37 Port name: MediaTek PreLoader USB VCOM (Android) (COM37) Detecting Chip Version... HW Chip: MT6735: 0321.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_byOctoplus_Hisense_v.1, n.0 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .15010051.4536334D.4203BE97.D808024B eMMC Flash: Samsung: QE63MB DA ver: 4.2.93 Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 14910 Mb Internal RAM size: 128 Kb External RAM size: 2048 Mb Reading partition... Reading info... Brand: Hisense Model: Hisense F24 Device: HS6737MT Platform: mt6737t Android version: 7.0 Display ID: NRD90M release-keys Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as Hisense_Hisense F24_27-11-2019_13-47-34.dump file Performed by 1.8.3.0 Software version

11-27-2019, 13:31	#5190 (permalink)
apacheadmiral No Life Poster Join Date: Apr 2008 Location: South Africa Posts: 708 Member: 746586 Status: Offline Thanks Meter: 205	Platform: MOBICEL Selected model: DANDY Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM37 Port name: MediaTek PreLoader USB VCOM (Android) (COM37) Detecting Chip Version... HW Chip: MT6580: 6580.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_Octoplus_Mobicel_v.1, n.0 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .90014A48.38473461.32A55644.DA145493 eMMC Flash: Hynix: H8G4a2 DA ver: 4.2.9C Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 7456 Mb Internal RAM size: 128 Kb External RAM size: 1024 Mb Reading partition... Reading info... Brand: Mobicel Model: DANDY Device: DANDY Platform: mt6580 Android version: 7.0 Display ID: alps-mp-n0.mp2-V1_tinno6580.we.n_P144 Factory Reset... Formating User Data section Factory Reset is successfully performed! Backup saved as Mobicel_DANDY_27-11-2019_13-46-13.dump file Performed by 1.8.3.0 Software version.