🐙 Post here success Reset FRP story with Octoplus FRP Tool - Page 347 - GSM-Forum

apacheadmiral · 11-27-2019, 13:31

Platform: MOBICEL
Selected model: DANDY
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM37
Port name: MediaTek PreLoader USB VCOM (Android) (COM37)
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_Octoplus_Mobicel_v.1, n.0
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .90014A48.38473461.32A55644.DA145493
eMMC Flash: Hynix: H8G4a2
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: Mobicel
Model: DANDY
Device: DANDY
Platform: mt6580
Android version: 7.0
Display ID: alps-mp-n0.mp2-V1_tinno6580.we.n_P144
Factory Reset...
Formating User Data section
Factory Reset is successfully performed!
Backup saved as Mobicel_DANDY_27-11-2019_13-46-13.dump file
Performed by 1.8.3.0 Software version.

apacheadmiral · 11-27-2019, 14:19

Welcome to Octoplus FRP Tool v.1.8.3.0
Platform: HUAWEI
Selected model: VNS-L31
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: VNS-L31
Phone SN: 4TE7N17619001586
Phone IMEI: 864002036476381
SW version: VNS-L31C16B136
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.8.3.0 Software version.

Desirat · 11-27-2019, 15:47

Platform: NOKIA
Selected model: TA-1060
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM16
Port name: MTK USB Port (COM16)
Detecting Chip Version...
HW Chip: MT6737: 0335.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 02
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_Octoplus_Nokia_v.1, n.0
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010046.4E36324D.4203C06E.D8BF2FF1
eMMC Flash: Samsung: FN62MB
DA ver: 4.2.9B
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: alps
Model: FRT
Device: FRT
Android version: 9
Display ID: 00WW_2_180
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as alps_FRT_27-11-2019_14-40-10.dump file
Performed by 1.8.3.0 Software version.

Dr_Wolodya · 11-28-2019, 11:44

Kruger & Matz MOVE 8 (7.0) Reset FRP successfully done:

Code:

Welcome to Octoplus FRP Tool v.1.8.3.0
Platform: KRUGER & MATZ
Selected model: MOVE 8
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM17
Port name: MediaTek PreLoader USB VCOM (Android) (COM17)
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010046.3732324D.4200AF89.F277936F
eMMC Flash: Samsung: F722MB
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: Kruger_Matz
Model: MOVE_8
Device: MOVE_8
Platform: mt6580
Android version: 7.0
Display ID: KM_MOVE8_V10.0_20181213
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Kruger_Matz_MOVE_8_28-11-2019_12-27-55.dump file
Performed by 1.8.3.0 Software version.

Dr_Wolodya · 11-28-2019, 14:28

Xiaomi Redmi 4x (santoni) (7.1.2, MIUI 10) Reset FRP successfully done:

Code:

Welcome to Octoplus FRP Tool v.1.8.3.0
Platform: XIAOMI
Selected model: REDMI 4X
Put the phone into EDL mode: 
1. Attach testpoint as shown in Help manual; 
2. Connect USB cable; 
3. Release testpoint after 3-5 seconds.
Found phone on COM10
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 0006B0E100000000
QC CPU: Snapdragon 435 MSM8940
QC SW VER: 00000000
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: Xiaomi
Model: Redmi 4X
Device: santoni
Platform: msm8937
Android version: 7.1.2
Display ID: N2G47H
Firmware version: V10.3.1.0.NAMMIXM
Resetting FRP lock..
Searching for signatures...
FRP lock is successfully reseted!
Rebooting phone
Backup saved as Xiaomi_Redmi 4X_28-11-2019_15-23-48.dump file
Performed by 1.8.3.0 Software version.

marcin7904 · 11-28-2019, 16:33

Welcome to Octoplus FRP Tool v.1.8.3.0
Platform: DOOGEE
Selected model: Y8
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM16
Port name: MediaTek PreLoader USB VCOM (Android) (COM16)
Detecting Chip Version...
HW Chip: MT6739: 0699.0000
HW Version: 8A00.CC00.0002.0000
Connecting...
Brom Version: FF
BootLoader Version: 03
Sending auth...
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.21
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: preloader
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 14910 Mb
eMMC Flash: .15010052.3331424D.4201D2E4.D0A18325
eMMC Flash: Samsung: R31BMB
Internal RAM size: 128 Kb
External RAM size: 3072 Mb
Reading partition...
Reading info...
Brand: DOOGEE
Model: Y8
Device: Y8
Android version: 9
Display ID: DOOGEE-Y8-Android9.0-20190304
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as DOOGEE_Y8_28-11-2019_16-28-19.dump file
Performed by 1.8.3.0 Software version.

apacheadmiral · 11-29-2019, 12:35

Welcome to Octoplus FRP Tool v.1.8.3.0
Platform: HUAWEI
Selected model: VTR-L29
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: VTR-L29
Phone SN: 7EX0217923000971
Phone IMEI: 865914033743176
Phone IMEI2: 865914033752177
SW version: VTR-L29 8.0.0.360(C185)
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.8.3.0 Software version.

apacheadmiral · 11-29-2019, 12:39

Welcome to Octoplus FRP Tool v.1.8.3.0
Platform: HUAWEI
Selected model: LDN-L01
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: LDN-L01
Phone SN: 8XEBB18707403151
Phone IMEI: 867239033678810
SW version: LDN-L01 8.0.0.149(C02)
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.8.3.0 Software version.

apacheadmiral · 11-29-2019, 12:39

Welcome to Octoplus FRP Tool v.1.8.3.0
Platform: HUAWEI
Selected model: LDN-L01
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: LDN-L01
Phone SN: 8XEBB18707403151
Phone IMEI: 867239033678810
SW version: LDN-L01 8.0.0.149(C02)
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.8.3.0 Software version.

Yahia_Sb · 11-29-2019, 13:55

Platform: SYMPHONY
Selected model: V140
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM10
Port name: MediaTek PreLoader USB VCOM_V1632 (Android) (COM10)
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_Octoplus_Mobicel_v.1, n.0
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .90014A48.38473461.32A527F2.4D9B75B5
eMMC Flash: Hynix: H8G4a2
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: Symphony
Model: V140
Device: V140
Android version: 8.1.0
Display ID: O11019 release-keys
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Symphony_V140_29-11-2019_18-54-20.dump file
Performed by 1.8.3.0 Software version.

apacheadmiral · 11-29-2019, 15:15

Welcome to Octoplus FRP Tool v.1.8.3.0
Platform: MOBICEL
Selected model: HYPE
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM37
Port name: MediaTek PreLoader USB VCOM (Android) (COM37)
Detecting Chip Version...
HW Chip: MT6739: 0699.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 03
Sending auth...
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2017/11/16.17:43_393798, n.0
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: preloader
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
eMMC Flash: .15010046.4E36324D.4203D333.9B7EA5A5
eMMC Flash: Samsung: FN62MB
Internal RAM size: 256 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: Mobicel
Model: HYPE
Device: HYPE
Android version: 8.1.0
Display ID: O11019 release-keys
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Mobicel_HYPE_29-11-2019_14-58-56.dump file
Performed by 1.8.3.0 Software version.

apacheadmiral · 11-29-2019, 20:54

Welcome to Octoplus FRP Tool v.1.8.3.0
Platform: HUAWEI
Selected model: VNS-L31
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: VNS-L31
Phone SN: 4TE0216804000387
Phone IMEI: 860921038028326
SW version: VNS-L31C02B346
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.8.3.0 Software version.

barakath · 11-30-2019, 11:40

Log file "C:\Program Files (x86)\Octoplus\Octoplus_FRP_Tool\LOG\30-11-2019_15-52-55.log" created (11/30/2019 3:52:57 PM).
INFO : 11/30/2019 3:53:10 PM > Welcome to Octoplus FRP Tool v.1.8.2.0
INFO : 11/30/2019 3:53:49 PM > Platform: HUAWEI
INFO : 11/30/2019 3:53:49 PM > Selected model: DRA-LX2
INFO : 11/30/2019 3:53:49 PM > Put the phone in FastBoot Mode:
INFO : 11/30/2019 3:53:49 PM > 1. Remove SD and SIM cards from the phone
INFO : 11/30/2019 3:53:49 PM > 2. Power phone OFF
INFO : 11/30/2019 3:53:49 PM > 3. Press and hold "Vol-" and insert USB cable
INFO : 11/30/2019 3:53:49 PM > 4. Wait until the phone enter in FastBoot Mode
INFO : 11/30/2019 3:53:49 PM > Searching for a phone. Please wait...
ERROR : 11/30/2019 3:54:20 PM > Operation was failed!
INFO : 11/30/2019 3:54:20 PM > Performed by 1.8.2.0 Software version.
INFO : 11/30/2019 3:54:20 PM >
INFO : 11/30/2019 3:55:06 PM > Platform: HUAWEI
INFO : 11/30/2019 3:55:06 PM > Selected model: LDN-LX2
INFO : 11/30/2019 3:55:06 PM > Put the phone in FastBoot Mode:
INFO : 11/30/2019 3:55:06 PM > 1. Remove SD and SIM cards from the phone
INFO : 11/30/2019 3:55:06 PM > 2. Power phone OFF
INFO : 11/30/2019 3:55:06 PM > 3. Press and hold "Vol-" and insert USB cable
INFO : 11/30/2019 3:55:06 PM > 4. Wait until the phone enter in FastBoot Mode
INFO : 11/30/2019 3:55:06 PM > Searching for a phone. Please wait...
INFO : 11/30/2019 3:55:27 PM > Detected phone model: LDN-LX2
INFO : 11/30/2019 3:55:27 PM > Phone SN: XXXXXXXXX
INFO : 11/30/2019 3:55:27 PM > Phone IMEI: XXXXXXXXXX
INFO : 11/30/2019 3:55:27 PM > SW version: LDN-LX2 8.0.0.159(C636)
INFO : 11/30/2019 3:55:27 PM > Connecting to server..
INFO : 11/30/2019 3:55:27 PM > OK
INFO : 11/30/2019 3:55:27 PM > Authorizing...
INFO : 11/30/2019 3:55:28 PM > Connecting to server..
INFO : 11/30/2019 3:55:28 PM > OK
INFO : 11/30/2019 3:55:28 PM > Authorizing...
ERROR : 11/30/2019 3:55:28 PM > Operation was failed!
INFO : 11/30/2019 3:55:28 PM > Performed by 1.8.2.0 Software version.
INFO : 11/30/2019 3:55:28 PM >
INFO : 11/30/2019 3:55:47 PM > Platform: HUAWEI
INFO : 11/30/2019 3:55:47 PM > Selected model: LDN-LX2
INFO : 11/30/2019 3:55:47 PM > Put the phone in FastBoot Mode:
INFO : 11/30/2019 3:55:47 PM > 1. Remove SD and SIM cards from the phone
INFO : 11/30/2019 3:55:47 PM > 2. Power phone OFF
INFO : 11/30/2019 3:55:47 PM > 3. Press and hold "Vol-" and insert USB cable
INFO : 11/30/2019 3:55:47 PM > 4. Wait until the phone enter in FastBoot Mode
INFO : 11/30/2019 3:55:47 PM > Searching for a phone. Please wait...
INFO : 11/30/2019 3:55:47 PM > Detected phone model: LDN-LX2
INFO : 11/30/2019 3:55:47 PM > Phone SN: XXXXXXXXX
INFO : 11/30/2019 3:55:47 PM > Phone IMEI: XXXXXXXXXX
INFO : 11/30/2019 3:55:47 PM > SW version: LDN-LX2 8.0.0.159(C636)
INFO : 11/30/2019 3:55:47 PM > Connecting to server..
INFO : 11/30/2019 3:55:49 PM > OK
INFO : 11/30/2019 3:55:49 PM > Authorizing...
INFO : 11/30/2019 3:55:51 PM > OK
INFO : 11/30/2019 3:55:51 PM > Resetting FRP lock..
WARN : 11/30/2019 3:55:57 PM > If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
WARN : 11/30/2019 3:55:57 PM > FRP lock is successfully reseted!
INFO : 11/30/2019 3:55:57 PM > Performed by 1.8.2.0 Software version.

barakath · 11-30-2019, 11:43

INFO : 11/30/2019 3:59:02 PM > Platform: HUAWEI
INFO : 11/30/2019 3:59:02 PM > Selected model: DRA-LX2
WARN : 11/30/2019 3:59:02 PM > Please, power phone OFF, press and hold "Vol-" button and connect USB cable.
INFO : 11/30/2019 3:59:02 PM > Searching for a phone. Please wait...
INFO : 11/30/2019 3:59:11 PM > Found phone on COM109
INFO : 11/30/2019 3:59:11 PM > Port name: MediaTek USB Port (COM109)
INFO : 11/30/2019 3:59:11 PM > Detecting Chip Version...
INFO : 11/30/2019 3:59:11 PM > HW Chip: MT6739: 0699.0000
INFO : 11/30/2019 3:59:11 PM > HW Version: 8A00.CA00.0000.0000
INFO : 11/30/2019 3:59:11 PM > Connecting...
WARN : 11/30/2019 3:59:11 PM > Brom Version: 05
INFO : 11/30/2019 3:59:11 PM > BootLoader Version: FE
INFO : 11/30/2019 3:59:11 PM > Sending auth...
INFO : 11/30/2019 3:59:11 PM > Sending Auth Data...
INFO : 11/30/2019 3:59:18 PM > Target Config: 0x000000E3
INFO : 11/30/2019 3:59:18 PM > Start Authentication...
INFO : 11/30/2019 3:59:18 PM > Connecting to server..
INFO : 11/30/2019 3:59:19 PM > OK
INFO : 11/30/2019 3:59:19 PM > Authorizing...
INFO : 11/30/2019 3:59:21 PM > OK
INFO : 11/30/2019 3:59:21 PM > Calculating...
INFO : 11/30/2019 3:59:23 PM > Authentication done!
INFO : 11/30/2019 3:59:23 PM > Searching Download Agent...
INFO : 11/30/2019 3:59:33 PM > Selected DA: MTK_AllInOne_DA_v3.3001.2017/09/28.17:29, n.0
INFO : 11/30/2019 3:59:33 PM > Sending Download Agent...
INFO : 11/30/2019 3:59:33 PM > DA sent successfully
INFO : 11/30/2019 3:59:33 PM > Initializing DA...
INFO : 11/30/2019 3:59:33 PM > Synchronizing with DA...
INFO : 11/30/2019 3:59:34 PM > Mobile Status: SYNC
INFO : 11/30/2019 3:59:34 PM > Mobile Status: brom
INFO : 11/30/2019 3:59:34 PM > Sending BootLoader Info...
INFO : 11/30/2019 3:59:41 PM > Initializing Memory Flash..
INFO : 11/30/2019 3:59:41 PM > Initialization successfully completed
INFO : 11/30/2019 3:59:41 PM > Sending loaders...
INFO : 11/30/2019 3:59:41 PM > Mobile Status: SYNC
INFO : 11/30/2019 3:59:41 PM > Reading Flash Info...
INFO : 11/30/2019 3:59:41 PM > EMMC rpmb size: 4 Mb
INFO : 11/30/2019 3:59:41 PM > EMMC boot1 size: 4 Mb
INFO : 11/30/2019 3:59:41 PM > EMMC boot2 size: 4 Mb
INFO : 11/30/2019 3:59:41 PM > EMMC gp1 size: 0 Mb
INFO : 11/30/2019 3:59:41 PM > EMMC gp2 size: 0 Mb
INFO : 11/30/2019 3:59:41 PM > EMMC gp3 size: 0 Mb
INFO : 11/30/2019 3:59:41 PM > EMMC gp4 size: 0 Mb
INFO : 11/30/2019 3:59:41 PM > EMMC user area size: 15028 Mb
INFO : 11/30/2019 3:59:41 PM > eMMC Flash: .90014A48.41473461.32D43AF8.1EDCB57B
INFO : 11/30/2019 3:59:41 PM > eMMC Flash: Hynix: HAG4a2
INFO : 11/30/2019 3:59:41 PM > Internal RAM size: 256 Kb
INFO : 11/30/2019 3:59:41 PM > External RAM size: 2048 Mb
INFO : 11/30/2019 3:59:41 PM > Reading partition...
INFO : 11/30/2019 3:59:41 PM > Reading info...
INFO : 11/30/2019 3:59:43 PM > Brand: HUAWEI
INFO : 11/30/2019 3:59:43 PM > Model: DRA-LX2
INFO : 11/30/2019 3:59:43 PM > Device: HWDRA-M
INFO : 11/30/2019 3:59:43 PM > Android version: 8.1.0
INFO : 11/30/2019 3:59:43 PM > Display ID: DRA-LX2 1.0.0.147(C636)
INFO : 11/30/2019 3:59:43 PM > Searching for signatures...
INFO : 11/30/2019 3:59:44 PM > Resetting FRP lock..
INFO : 11/30/2019 3:59:45 PM > Backup saved as HUAWEI_DRA-LX2_30-11-2019_15-59-45.dump file
WARN : 11/30/2019 3:59:45 PM > FRP lock is successfully reseted!
INFO : 11/30/2019 3:59:45 PM > Performed by 1.8.2.0 Software version.

djmurod86 · 11-30-2019, 12:53

Platform: LENOVO
Selected model: S1LA40
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM68
Port name: MediaTek USB Port (COM68)
Detecting Chip Version...
HW Chip: MT6753: 0337.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: 05
BootLoader Version: FE
Sending auth...
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.00.00, n.13
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010051.3331334D.4206DD2B.D02409DD
eMMC Flash: Samsung: Q313MB
DA ver: 4.2.93
Initializing Memory Flash..
Sending BootLoader Info...
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 14910 Mb
Internal RAM size: 128 Kb
External RAM size: 2048 Mb
Reading partition...
Reading info...
Brand: Lenovo
Model: Lenovo S1La40
Device: S1La40
Platform: mt6753
Android version: 5.1
Display ID: S1La40_S300_170523_16G_ROW
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Lenovo_Lenovo S1La40_30-11-2019_16-52-36.dump file
Performed by 1.8.3.0 Software version.

11-27-2019, 15:47	#5193 (permalink)
Desirat No Life Poster Join Date: Mar 2007 Location: Portugal Posts: 1,057 Member: 478535 Status: Offline Thanks Meter: 433	Nokia 1 ta-1060 10/2019 frp Done Platform: NOKIA Selected model: TA-1060 Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM16 Port name: MTK USB Port (COM16) Detecting Chip Version... HW Chip: MT6737: 0335.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 02 Searching Download Agent... Selected DA: MTK_AllInOne_DA_Octoplus_Nokia_v.1, n.0 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .15010046.4E36324D.4203C06E.D8BF2FF1 eMMC Flash: Samsung: FN62MB DA ver: 4.2.9B Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 0 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 7456 Mb Internal RAM size: 128 Kb External RAM size: 1024 Mb Reading partition... Reading info... Brand: alps Model: FRT Device: FRT Android version: 9 Display ID: 00WW_2_180 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as alps_FRT_27-11-2019_14-40-10.dump file Performed by 1.8.3.0 Software version.

11-28-2019, 16:33	#5196 (permalink)
marcin7904 No Life Poster Join Date: Jun 2006 Location: Poland Pruszków-Warszawa-Warka Posts: 1,321 Member: 290272 Status: Offline Thanks Meter: 431	Doogee Y8 Welcome to Octoplus FRP Tool v.1.8.3.0 Platform: DOOGEE Selected model: Y8 Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM16 Port name: MediaTek PreLoader USB VCOM (Android) (COM16) Detecting Chip Version... HW Chip: MT6739: 0699.0000 HW Version: 8A00.CC00.0002.0000 Connecting... Brom Version: FF BootLoader Version: 03 Sending auth... Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.21 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... Mobile Status: SYNC Mobile Status: preloader Initializing Memory Flash.. Initialization successfully completed Sending loaders... Mobile Status: SYNC Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 14910 Mb eMMC Flash: .15010052.3331424D.4201D2E4.D0A18325 eMMC Flash: Samsung: R31BMB Internal RAM size: 128 Kb External RAM size: 3072 Mb Reading partition... Reading info... Brand: DOOGEE Model: Y8 Device: Y8 Android version: 9 Display ID: DOOGEE-Y8-Android9.0-20190304 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as DOOGEE_Y8_28-11-2019_16-28-19.dump file Performed by 1.8.3.0 Software version.

11-30-2019, 12:53	#5205 (permalink)
djmurod86 No Life Poster Join Date: Feb 2007 Location: Inside Posts: 4,133 Member: 455852 Status: Offline Sonork: 100.1596308 Thanks Meter: 1,993	S1la40 Platform: LENOVO Selected model: S1LA40 Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM68 Port name: MediaTek USB Port (COM68) Detecting Chip Version... HW Chip: MT6753: 0337.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: 05 BootLoader Version: FE Sending auth... Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.00.00, n.13 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .15010051.3331334D.4206DD2B.D02409DD eMMC Flash: Samsung: Q313MB DA ver: 4.2.93 Initializing Memory Flash.. Sending BootLoader Info... Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 14910 Mb Internal RAM size: 128 Kb External RAM size: 2048 Mb Reading partition... Reading info... Brand: Lenovo Model: Lenovo S1La40 Device: S1La40 Platform: mt6753 Android version: 5.1 Display ID: S1La40_S300_170523_16G_ROW Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as Lenovo_Lenovo S1La40_30-11-2019_16-52-36.dump file Performed by 1.8.3.0 Software version.

11-27-2019, 13:31	#5191 (permalink)
apacheadmiral No Life Poster Join Date: Apr 2008 Location: South Africa Posts: 708 Member: 746586 Status: Offline Thanks Meter: 205	Platform: MOBICEL Selected model: DANDY Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM37 Port name: MediaTek PreLoader USB VCOM (Android) (COM37) Detecting Chip Version... HW Chip: MT6580: 6580.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_Octoplus_Mobicel_v.1, n.0 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .90014A48.38473461.32A55644.DA145493 eMMC Flash: Hynix: H8G4a2 DA ver: 4.2.9C Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 7456 Mb Internal RAM size: 128 Kb External RAM size: 1024 Mb Reading partition... Reading info... Brand: Mobicel Model: DANDY Device: DANDY Platform: mt6580 Android version: 7.0 Display ID: alps-mp-n0.mp2-V1_tinno6580.we.n_P144 Factory Reset... Formating User Data section Factory Reset is successfully performed! Backup saved as Mobicel_DANDY_27-11-2019_13-46-13.dump file Performed by 1.8.3.0 Software version.

11-27-2019, 14:19	#5192 (permalink)
apacheadmiral No Life Poster Join Date: Apr 2008 Location: South Africa Posts: 708 Member: 746586 Status: Offline Thanks Meter: 205	Welcome to Octoplus FRP Tool v.1.8.3.0 Platform: HUAWEI Selected model: VNS-L31 Put the phone in FastBoot Mode: 1. Remove SD and SIM cards from the phone 2. Power phone OFF 3. Press and hold "Vol-" and insert USB cable 4. Wait until the phone enter in FastBoot Mode Searching for a phone. Please wait... Detected phone model: VNS-L31 Phone SN: 4TE7N17619001586 Phone IMEI: 864002036476381 SW version: VNS-L31C16B136 Connecting to server..OK Authorizing...OK Resetting FRP lock.. If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually. FRP lock is successfully reseted! Performed by 1.8.3.0 Software version.

11-29-2019, 12:35	#5197 (permalink)
apacheadmiral No Life Poster Join Date: Apr 2008 Location: South Africa Posts: 708 Member: 746586 Status: Offline Thanks Meter: 205	Welcome to Octoplus FRP Tool v.1.8.3.0 Platform: HUAWEI Selected model: VTR-L29 Put the phone in FastBoot Mode: 1. Remove SD and SIM cards from the phone 2. Power phone OFF 3. Press and hold "Vol-" and insert USB cable 4. Wait until the phone enter in FastBoot Mode Searching for a phone. Please wait... Detected phone model: VTR-L29 Phone SN: 7EX0217923000971 Phone IMEI: 865914033743176 Phone IMEI2: 865914033752177 SW version: VTR-L29 8.0.0.360(C185) Connecting to server..OK Authorizing...OK Resetting FRP lock.. If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually. FRP lock is successfully reseted! Performed by 1.8.3.0 Software version.

11-29-2019, 12:39	#5198 (permalink)
apacheadmiral No Life Poster Join Date: Apr 2008 Location: South Africa Posts: 708 Member: 746586 Status: Offline Thanks Meter: 205	Welcome to Octoplus FRP Tool v.1.8.3.0 Platform: HUAWEI Selected model: LDN-L01 Put the phone in FastBoot Mode: 1. Remove SD and SIM cards from the phone 2. Power phone OFF 3. Press and hold "Vol-" and insert USB cable 4. Wait until the phone enter in FastBoot Mode Searching for a phone. Please wait... Detected phone model: LDN-L01 Phone SN: 8XEBB18707403151 Phone IMEI: 867239033678810 SW version: LDN-L01 8.0.0.149(C02) Connecting to server..OK Authorizing...OK Resetting FRP lock.. If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually. FRP lock is successfully reseted! Performed by 1.8.3.0 Software version.

11-29-2019, 12:39	#5199 (permalink)
apacheadmiral No Life Poster Join Date: Apr 2008 Location: South Africa Posts: 708 Member: 746586 Status: Offline Thanks Meter: 205	Welcome to Octoplus FRP Tool v.1.8.3.0 Platform: HUAWEI Selected model: LDN-L01 Put the phone in FastBoot Mode: 1. Remove SD and SIM cards from the phone 2. Power phone OFF 3. Press and hold "Vol-" and insert USB cable 4. Wait until the phone enter in FastBoot Mode Searching for a phone. Please wait... Detected phone model: LDN-L01 Phone SN: 8XEBB18707403151 Phone IMEI: 867239033678810 SW version: LDN-L01 8.0.0.149(C02) Connecting to server..OK Authorizing...OK Resetting FRP lock.. If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually. FRP lock is successfully reseted! Performed by 1.8.3.0 Software version.

11-29-2019, 13:55	#5200 (permalink)
Yahia_Sb No Life Poster Join Date: Aug 2014 Posts: 658 Member: 2233266 Status: Offline Thanks Meter: 252	Platform: SYMPHONY Selected model: V140 Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM10 Port name: MediaTek PreLoader USB VCOM_V1632 (Android) (COM10) Detecting Chip Version... HW Chip: MT6580: 6580.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_Octoplus_Mobicel_v.1, n.0 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .90014A48.38473461.32A527F2.4D9B75B5 eMMC Flash: Hynix: H8G4a2 DA ver: 4.2.9C Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 7456 Mb Internal RAM size: 128 Kb External RAM size: 1024 Mb Reading partition... Reading info... Brand: Symphony Model: V140 Device: V140 Android version: 8.1.0 Display ID: O11019 release-keys Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as Symphony_V140_29-11-2019_18-54-20.dump file Performed by 1.8.3.0 Software version.

11-29-2019, 15:15	#5201 (permalink)
apacheadmiral No Life Poster Join Date: Apr 2008 Location: South Africa Posts: 708 Member: 746586 Status: Offline Thanks Meter: 205	Welcome to Octoplus FRP Tool v.1.8.3.0 Platform: MOBICEL Selected model: HYPE Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM37 Port name: MediaTek PreLoader USB VCOM (Android) (COM37) Detecting Chip Version... HW Chip: MT6739: 0699.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 03 Sending auth... Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2017/11/16.17:43_393798, n.0 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... Mobile Status: SYNC Mobile Status: preloader Initializing Memory Flash.. Initialization successfully completed Sending loaders... Mobile Status: SYNC Reading Flash Info... EMMC rpmb size: 0 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 7456 Mb eMMC Flash: .15010046.4E36324D.4203D333.9B7EA5A5 eMMC Flash: Samsung: FN62MB Internal RAM size: 256 Kb External RAM size: 1024 Mb Reading partition... Reading info... Brand: Mobicel Model: HYPE Device: HYPE Android version: 8.1.0 Display ID: O11019 release-keys Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as Mobicel_HYPE_29-11-2019_14-58-56.dump file Performed by 1.8.3.0 Software version.

11-29-2019, 20:54	#5202 (permalink)
apacheadmiral No Life Poster Join Date: Apr 2008 Location: South Africa Posts: 708 Member: 746586 Status: Offline Thanks Meter: 205	Welcome to Octoplus FRP Tool v.1.8.3.0 Platform: HUAWEI Selected model: VNS-L31 Put the phone in FastBoot Mode: 1. Remove SD and SIM cards from the phone 2. Power phone OFF 3. Press and hold "Vol-" and insert USB cable 4. Wait until the phone enter in FastBoot Mode Searching for a phone. Please wait... Detected phone model: VNS-L31 Phone SN: 4TE0216804000387 Phone IMEI: 860921038028326 SW version: VNS-L31C02B346 Connecting to server..OK Authorizing...OK Resetting FRP lock.. If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually. FRP lock is successfully reseted! Performed by 1.8.3.0 Software version.