|
|
 |
|
Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. Only registered members may post questions, contact other members or search our database of over 8 million posts. Registration is fast, simple and absolutely free so please - Click to REGISTER! If you have any problems with the registration process or your account login, please contact contact us . |
| |||||||
| Register | FAQ | Donate | Forum Rules | Root any Device | ★iPhone Unlock★ | ★ Direct Codes ★ | Direct Unlock Source |
 |
| | LinkBack | Thread Tools | Display Modes |
12-05-2019, 18:27
| #5251 (permalink) |
| No Life Poster   Join Date: Jun 2006 Location: Poland Pruszków-Warszawa-Warka
Posts: 1,321
Member: 290272 Status: Offline Thanks Meter: 431  | HUAWEI P10 Lite WAS-LX1 Selected model: WAS-LX1 Put the phone in FastBoot Mode: 1. Remove SD and SIM cards from the phone 2. Power phone OFF 3. Press and hold "Vol-" and insert USB cable 4. Wait until the phone enter in FastBoot Mode Searching for a phone. Please wait... Detected phone model: WAS-LX1 Phone SN: PMF4C1780900XXXX Phone IMEI: 86643103184XXXX Phone IMEI2: 86643103187XXXX SW version: WAS-LX1 8.0.0.390(C432) Connecting to server..OK Authorizing...OK Resetting FRP lock.. If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually. FRP lock is successfully reseted! Performed by 1.8.3.0 Software version. |
 |
|
12-05-2019, 21:38
| #5252 (permalink) |
| No Life Poster Join Date: Jan 2008 Location: Pb - BRAZIL
Posts: 640
Member: 689942 Status: Offline Thanks Meter: 312 | Thanks....Sucesfull Moto g7 ( xt1962-4 ) Android 9 Platform: MOTOROLA Selected model: XT1962-5 Put the phone into Factory Mode: 1. Power phone OFF; 2. Press and hold "Vol-" + "Power" buttons; 3. Select Factory Mode, then confirm your selection; 4. Wait until the phone Power ON; 5. Connect USB cable. Searching for a phone. Please wait... Phone found. Reading info... Phone model: 8953.gen Firmware released date: Jan 11 2019 Firmware released time: 10:36:01 Firmware compiled date: Jan 08 2019 Firmware compiled time: 04:00:00 SW version: MPSS.TA.3.0.c6-00047-8953_GEN_PACK-2 Enabling "USB Debugging" mode... Please, press "OK" button on the phone to allow USB debugging.. Searching for a phone (waiting for ADB / Fastboot device)... Phone found. Reading info... Phone model: motorola moto g(7) SW version: PPOS29.80-61-2 Date: Mon Apr 1 21:05:17 CDT 2019 Android version: 9 Baseband M632_11.47.01.85R RIVER_LATAMDSDS_CUST Detected phone model: XT1962-4 Resetting FRP lock.. FRP lock is successfully reseted! Performed by 1.8.3.0 Software version. |
| |
|
12-05-2019, 21:38
| #5253 (permalink) |
| No Life Poster Join Date: Jan 2008 Location: Pb - BRAZIL
Posts: 640
Member: 689942 Status: Offline Thanks Meter: 312 | Thanks....Sucesfull Moto g7 ( xt1962-4 ) Android 9 Platform: MOTOROLA Selected model: XT1962-5 Put the phone into Factory Mode: 1. Power phone OFF; 2. Press and hold "Vol-" + "Power" buttons; 3. Select Factory Mode, then confirm your selection; 4. Wait until the phone Power ON; 5. Connect USB cable. Searching for a phone. Please wait... Phone found. Reading info... Phone model: 8953.gen Firmware released date: Jan 11 2019 Firmware released time: 10:36:01 Firmware compiled date: Jan 08 2019 Firmware compiled time: 04:00:00 SW version: MPSS.TA.3.0.c6-00047-8953_GEN_PACK-2 Enabling "USB Debugging" mode... Please, press "OK" button on the phone to allow USB debugging.. Searching for a phone (waiting for ADB / Fastboot device)... Phone found. Reading info... Phone model: motorola moto g(7) SW version: PPOS29.80-61-2 Date: Mon Apr 1 21:05:17 CDT 2019 Android version: 9 Baseband M632_11.47.01.85R RIVER_LATAMDSDS_CUST Detected phone model: XT1962-4 Resetting FRP lock.. FRP lock is successfully reseted! Performed by 1.8.3.0 Software version. |
| |
|
12-06-2019, 07:16
| #5254 (permalink) |
| No Life Poster  Join Date: Feb 2007 Location: Inside
Posts: 4,133
Member: 455852 Status: Offline Sonork: 100.1596308 Thanks Meter: 1,993 | ASUS_Z00LD FRP DoNe Platform: ASUS Selected model: ZE550KL (Z00LD) Put the phone into Fastboot Mode: 1. Power phone OFF; 2. Press and hold "Vol+" button and connect USB cable. Searching for a phone. Please wait... Searching for a phone... Phone found. Enabling "USB Debugging" mode... Rebooting to Normal mode... Searching for a phone (waiting for ADB / Fastboot device)... Proper android device not found. Make shure that "USB debug" option on the device is turned on. Phone found. Reading info... Phone model: asus ASUS_Z00LD SW version: MMB29P Date: 2018幓 03ęœˆ 08ę—„ ę˜ŸęœŸå›› 14:02:35 CST Android version: 6.0.1 Baseband 202c10_11.1.0_170328 Resetting FRP lock.. FRP lock is successfully reseted! Performed by 1.8.3.0 Software version. |
| |
|
12-06-2019, 12:48
| #5255 (permalink) |
| No Life Poster  Join Date: Nov 2002 Location: Slovakia Age: 40
Posts: 1,060
Member: 17405 Status: Offline Thanks Meter: 345 | Lenovo A5 L18021 frp ok Welcome to Octoplus FRP Tool v.1.8.1.1 Platform: __GENERAL RESET FRP METHODS Selected model: MTK CUSTOM Selected Download Agent: C:\A55\MTK_AllInOne_DA.bin Selected Preloader: C:\A55\preloader_l18021.bin Please, power phone OFF (press and hold "Vol+" or "Vol-" button) and connect USB cable. Searching for a phone. Please wait... Found phone on COM13 Detecting Chip Version... HW Chip: MT6739: 0699.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 03 Sending auth... Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2019-02-01.10:59_466507, n.0 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... Mobile Status: SYNC Mobile Status: preloader Initializing Memory Flash.. Initialization successfully completed Sending loaders... Mobile Status: SYNC Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 14910 Mb eMMC Flash: .15010052.4531424D.420D6D5D.06A194BD eMMC Flash: Samsung: RE1BMB Internal RAM size: 128 Kb External RAM size: 3072 Mb Reading partition... Reading info... Brand: Lenovo Model: Lenovo L18021 Device: L18021 Android version: 8.1.0 Display ID: O11019 release-keys Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as Lenovo_Lenovo L18021_06-12-2019_12-46-16.dump file Performed by 1.8.1.1 Software version. |
| |
|
12-06-2019, 13:38
| #5256 (permalink) |
| No Life Poster Join Date: Feb 2007 Location: Inside
Posts: 4,133
Member: 455852 Status: Offline Sonork: 100.1596308 Thanks Meter: 1,993 | Redmi 5a MiAccount + FRP DONE Platform: XIAOMI Selected model: REDMI NOTE 5A Please, select one of the options for "Reset Mi Account" operation or press Ok to continue... Go to "Wi-Fi Settings" and forget connected Wi-Fi network or perform Wipe Data from recovery Put the phone into EDL mode: 1. Attach testpoint as shown in Help manual; 2. Connect USB cable; 3. Release testpoint after 3-5 seconds. Found phone on COM12 Mode: Qualcomm 9008 Connecting... Reading info... QC HW ID: 000560E100000000 QC CPU: Snapdragon 425 MSM8917 QC SW VER: 00000000 Searching loader... Sending loaders... Loader send successfuly. Reconnecting... Checking request.. Reading partition... Reading info... Brand: xiaomi Model: Redmi Note 5A Device: ugglite Platform: msm8937 Android version: 7.1.2 Display ID: N2G47H Firmware version: V9.6.2.0.NDFMIFD Resetting Mi Account... On Your device detected FRP Lock! Reset it? Reading MI part... Writing MI part... Resetting FRP lock.. Rebooting phone Backup saved as xiaomi_Redmi Note 5A_06-12-2019_17-36-22.dump file Mi Account is successfully reseted! Performed by 1.8.3.0 Software version. |
| |
|
12-07-2019, 00:14
| #5257 (permalink) |
| Freak Poster   Join Date: Jul 2009 Location: In The World
Posts: 403
Member: 1068286 Status: Offline Thanks Meter: 182 | Platform: ARCHOS Selected model: AC57AS4G Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM20 Connecting... Mobile Status: SPRD3 Sending preloader... Mobile Status: Spreadtrum Boot Block version 1.1 Sending mainloader... Reading info... Brand: archos Model: Archos Access 57 4G Device: ac57as4g Android version: 8.1.0 Display ID: Archos_AC57AS4G_8085AR_CQ_C55B_V10_2....015804.Canella Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as archos_Archos Access 57 4G_07-12-2019_00-11-07.dump file Performed by 1.8.3.0 Software version. |
| |
|
12-07-2019, 05:41
| #5258 (permalink) |
| Product Supporter  Join Date: Mar 2016 Location: Bangladesh
Posts: 4,574
Member: 2548908 Status: Offline Sonork: 100.1672479 Thanks Meter: 761 | Huawei KSA LX9 FRP Remove Done By Octoplus FRP Tool PHP Code:  Last edited by nobichanmaruf; 12-07-2019 at 05:46. |
| |
|
12-07-2019, 09:44
| #5259 (permalink) |
| No Life Poster Join Date: Jun 2006 Location: Poland Pruszków-Warszawa-Warka
Posts: 1,321
Member: 290272 Status: Offline Thanks Meter: 431 | Motorola XT1771 (Moto E4 Plus) Welcome to Octoplus FRP Tool v.1.8.3.0 Platform: HUAWEI Selected model: FIG-LX1 Put the phone in FastBoot Mode: 1. Remove SD and SIM cards from the phone 2. Power phone OFF 3. Press and hold "Vol-" and insert USB cable 4. Wait until the phone enter in FastBoot Mode Searching for a phone. Please wait... Detected phone model: FIG-LX1 SW version: FIG-LX1 9.1.0.123(C432E8R1P5) Connecting to server..OK Authorizing...OK Resetting FRP lock.. If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually. Operation was failed! Performed by 1.8.3.0 Software version. Platform: HUAWEI Selected model: FIG-LX1 Put the phone into Factory mode: 1. Attach testpoint as shown in Help manual; 2. Connect USB cable; 3. Release testpoint. Searching for a phone. Please wait... Operation was canceled Performed by 1.8.3.0 Software version. Platform: MOTOROLA Selected model: XT1771 Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM16 Port name: MediaTek PreLoader USB VCOM (Android) (COM16) Detecting Chip Version... HW Chip: MT6737: 0335.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.10 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .15010052.4531424D.420DEE62.9B01C011 eMMC Flash: Samsung: RE1BMB DA ver: 4.2.9B Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 14910 Mb Internal RAM size: 128 Kb External RAM size: 3072 Mb Reading partition... Reading info... Brand: motorola Model: Moto E (4) Plus Device: nicklaus Platform: mt6737m Android version: 7.1.1 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as motorola_Moto E (4) Plus_07-12-2019_09-39-06.dump file Performed by 1.8.3.0 Software version. |
| |
|
12-07-2019, 10:03
| #5260 (permalink) |
| No Life Poster Join Date: Jun 2006 Location: Poland Pruszków-Warszawa-Warka
Posts: 1,321
Member: 290272 Status: Offline Thanks Meter: 431 | Huawei fig-lx1 p smart Welcome to Octoplus FRP Tool v.1.8.3.0 Platform: HUAWEI Selected model: FIG-LX1 Put the phone into Factory mode: 1. Attach testpoint as shown in Help manual; 2. Connect USB cable; 3. Release testpoint. Searching for a phone. Please wait... Found phone on COM77 Checking resource files... Downloading resources... Searching for a phone. Please wait... Found phone on COM77 Setting options... Writing BOOT... Switching to FastBoot mode... Searching for a phone. Please wait... Detected phone model: FIG-LX1 Phone SN: XEDNW18820005085 Phone IMEI: 862160048882079 Phone IMEI2: 862160048907082 SW version: FIG-LX1 9.1.0.123(C432E8R1P5) FRP lock is successfully reseted! Performed by 1.8.3.0 Software version. |
| |
|
12-07-2019, 10:03
| #5261 (permalink) |
| No Life Poster Join Date: Feb 2007 Location: Inside
Posts: 4,133
Member: 455852 Status: Offline Sonork: 100.1596308 Thanks Meter: 1,993 | Micromax Q402+ FRP DONE Welcome to Octoplus FRP Tool v.1.8.3.0 Platform: MICROMAX Selected model: Q402 PLUS Please, power phone OFF, press and hold "Vol+" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM189 Connecting... Mobile Status: SPRD3 Sending preloader... Mobile Status: Spreadtrum Boot Block version 1.1 Sending mainloader... Reading info... Brand: Micromax Model: Micromax Q402+ Device: Q402Plus Platform: sc8830 Android version: 7.0 Display ID: MMX_Q402+_RU_SW_V15_HW_V4.0_20180906 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as Micromax_Micromax Q402+_07-12-2019_14-01-37.dump file Performed by 1.8.3.0 Software version. |
| |
|
12-07-2019, 11:39
| #5262 (permalink) |
| No Life Poster Join Date: Apr 2008 Location: South Africa
Posts: 708
Member: 746586 Status: Offline Thanks Meter: 205 | Welcome to Octoplus FRP Tool v.1.8.3.0 Platform: MINT Selected model: ORION Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM37 Port name: MediaTek PreLoader USB VCOM (Android) (COM37) Detecting Chip Version... HW Chip: MT6580: 6580.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.11 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .90014A48.34473261.11020000.197485D1 eMMC Flash: Hynix: H4G2a DA ver: 4.2.9C Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 3728 Mb Internal RAM size: 128 Kb External RAM size: 512 Mb Reading partition... Reading info... Brand: Mint Model: Mint_Orion Device: Mint_Orion Android version: 8.1.0 Display ID: Mint_Orion_V01_20180827 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as Mint_Mint_Orion_07-12-2019_12-36-52.dump file Performed by 1.8.3.0 Software version. |
| |
|
12-07-2019, 13:14
| #5263 (permalink) |
| Freak Poster  Join Date: Aug 2019 Location: GuanGzhou-China
Posts: 412
Member: 2924041 Status: Offline Thanks Meter: 142 | Welcome to Octoplus FRP Tool v.1.8.3.0 Platform: HUAWEI Selected model: CRO-U00 Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM12 Port name: MediaTek PreLoader USB VCOM (Android) (COM12) Detecting Chip Version... HW Chip: MT6580: 6580.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_Octoplus_Huawei_v.1, n.0 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .15010046.4E36324D.4206892F.A8E465D1 eMMC Flash: Samsung: FN62MB DA ver: 4.2.94 Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 0 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 7456 Mb Internal RAM size: 128 Kb External RAM size: 1024 Mb Reading partition... Reading info... Brand: HUAWEI Model: CRO-U00 Device: HWCRO-U6580M Platform: mt6580 Android version: 6.0 Display ID: Cairo-U00C636B128 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as HUAWEI_CRO-U00_07-12-2019_18-10-56.dump file Performed by 1.8.3.0 Software version. |
| |
|
12-07-2019, 13:14
| #5264 (permalink) |
| Freak Poster Join Date: Aug 2019 Location: GuanGzhou-China
Posts: 412
Member: 2924041 Status: Offline Thanks Meter: 142 | Welcome to Octoplus FRP Tool v.1.8.3.0 Platform: HUAWEI Selected model: CRO-U00 Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM12 Port name: MediaTek PreLoader USB VCOM (Android) (COM12) Detecting Chip Version... HW Chip: MT6580: 6580.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_Octoplus_Huawei_v.1, n.0 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .15010046.4E36324D.4206892F.A8E465D1 eMMC Flash: Samsung: FN62MB DA ver: 4.2.94 Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 0 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 7456 Mb Internal RAM size: 128 Kb External RAM size: 1024 Mb Reading partition... Reading info... Brand: HUAWEI Model: CRO-U00 Device: HWCRO-U6580M Platform: mt6580 Android version: 6.0 Display ID: Cairo-U00C636B128 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as HUAWEI_CRO-U00_07-12-2019_18-10-56.dump file Performed by 1.8.3.0 Software version. |
| |
|
12-07-2019, 14:05
| #5265 (permalink) |
| No Life Poster Join Date: Jun 2006 Location: Poland Pruszków-Warszawa-Warka
Posts: 1,321
Member: 290272 Status: Offline Thanks Meter: 431 | Xiaomi REDMI 4X Welcome to Octoplus FRP Tool v.1.8.3.0 Platform: XIAOMI Selected model: REDMI 4X Please, select one of the options for "Reset Mi Account" operation or press Ok to continue... Go to "Wi-Fi Settings" and forget connected Wi-Fi network or perform Wipe Data from recovery Put the phone into EDL mode: 1. Attach testpoint as shown in Help manual; 2. Connect USB cable; 3. Release testpoint after 3-5 seconds. Found phone on COM8 Mode: Qualcomm 9008 Connecting... Reading info... QC HW ID: 0006B0E100000000 QC CPU: Snapdragon 435 MSM8940 QC SW VER: 00000000 Searching loader... Sending loaders... Loader send successfuly. Reconnecting... Checking request.. Reading partition... Reading info... Brand: Xiaomi Model: Redmi 4X Device: santoni Platform: msm8937 Android version: 7.1.2 Display ID: N2G47H Firmware version: V9.6.2.0.NAMMIFD Resetting Mi Account... Reading MI part... Writing MI part... Rebooting phone Backup saved as Xiaomi_Redmi 4X_07-12-2019_13-44-29.dump file Please power phone ON and enable "USB Debugging" then press "OK" button! If operation wasn't completed, then Your device get re-locked and credits aren't refundable! Searching for a phone (waiting for ADB / Fastboot device)... Please, press "OK" button on the phone to allow USB debugging.. Phone found. Reading info... Phone model: Xiaomi Redmi 4X SW version: N2G47H Date: Tue Jul 24 11:41:20 WIB 2018 Android version: 7.1.2 Baseband MPSS.TA.2.3.c1-00395-8953_GEN_PACK-1_V042 Disabling Mi Services... Mi Account is successfully reseted! Performed by 1.8.3.0 Software version. |
| |
|
| Bookmarks |
| |
|
|
Linear Mode
