🐙 Post here success Reset FRP story with Octoplus FRP Tool - Page 353 - GSM-Forum

barakath · 12-10-2019, 15:32

INFO : 12/10/2019 12:27:20 PM > Welcome to Octoplus FRP Tool v.1.8.3.0
INFO : 12/10/2019 12:27:55 PM > Selected interface: USB
INFO : 12/10/2019 12:27:55 PM > Searching for device. Please wait...
INFO : 12/10/2019 12:27:55 PM > Waiting for device...
ERROR : 12/10/2019 12:27:55 PM > Device was not found!
INFO : 12/10/2019 12:27:55 PM > Selected interface: UART
INFO : 12/10/2019 12:27:55 PM > Note: Type *#0*# on the phone and connect UART cable.
INFO : 12/10/2019 12:27:55 PM > Searching for device. Please wait...
ERROR : 12/10/2019 12:27:58 PM > Device not found!
INFO : 12/10/2019 12:27:58 PM > Performed by 1.8.3.0 Software version.
INFO : 12/10/2019 12:27:58 PM >
INFO : 12/10/2019 12:28:36 PM > Platform: SAMSUNG
INFO : 12/10/2019 12:28:36 PM > Selected model: SM-J200G
WARN : 12/10/2019 12:28:37 PM > Reset FRP/ Reactivation lock operation for SM-J200G will delete all user data on the phone (contacts, pictures and others)!
WARN : 12/10/2019 12:28:37 PM >
WARN : 12/10/2019 12:28:37 PM > NOTE: You can reset FRP/ Reactivation without losing user data via Factory Reset FRP/ Reactivation service.
WARN : 12/10/2019 12:28:37 PM > Connecting to server...
INFO : 12/10/2019 12:28:40 PM > Connecting to server...Ok!
INFO : 12/10/2019 12:28:40 PM > Checking resource files...
INFO : 12/10/2019 12:28:42 PM > Resource files already downloaded.
WARN : 12/10/2019 12:28:42 PM > Please put the phone into Download Mode and connect USB cable.
WARN : 12/10/2019 12:28:52 PM > To put SM-J200G into Download Mode, You have to perform the following steps:
WARN : 12/10/2019 12:28:52 PM > 1. Reconnect the battery.
WARN : 12/10/2019 12:28:52 PM > 2. Press and hold "Volume-" + "Home" + "Power ON" keys.
WARN : 12/10/2019 12:28:52 PM > 3. When phone turns on, press "Volume+" key.
INFO : 12/10/2019 12:28:52 PM > Waiting for phone...
WARN : 12/10/2019 12:28:52 PM > Advanced mode!
INFO : 12/10/2019 12:28:54 PM > Firmware write started.
INFO : 12/10/2019 12:28:54 PM > Writing Custom section...
INFO : 12/10/2019 12:28:58 PM > Custom section has been written successfully.
INFO : 12/10/2019 12:28:58 PM > Firmware writing successfully completed.
WARN : 12/10/2019 12:28:58 PM > FRP lock is successfully reseted!
BINF : 12/10/2019 12:28:58 PM > Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset"
INFO : 12/10/2019 12:28:58 PM > Performed by 1.8.3.0 Software version.

YOU CAN DO THIS MODEL VIA MANUAL OR ANY FREE TOOL BUT WITH PROFESSIONAL TOOL LIKE OCTOPUS SAVE YOUR TIME MUCH MORE

barakath · 12-10-2019, 15:34

INFO : 12/10/2019 4:06:17 PM > Welcome to Octoplus FRP Tool v.1.8.3.0
INFO : 12/10/2019 4:06:59 PM > Platform: SAMSUNG
INFO : 12/10/2019 4:06:59 PM > Selected model: SM-J106F
WARN : 12/10/2019 4:07:00 PM > Reset FRP/ Reactivation lock operation for SM-J106F will delete all user data on the phone (contacts, pictures and others)!
WARN : 12/10/2019 4:07:00 PM >
WARN : 12/10/2019 4:07:00 PM > NOTE: You can reset FRP/ Reactivation without losing user data via Factory Reset FRP/ Reactivation service.
WARN : 12/10/2019 4:07:00 PM > Connecting to server...
INFO : 12/10/2019 4:07:04 PM > Connecting to server...Ok!
INFO : 12/10/2019 4:07:04 PM > Checking resource files...
INFO : 12/10/2019 4:07:06 PM > Resource files already downloaded.
WARN : 12/10/2019 4:07:07 PM > Please put the phone into Download Mode and connect USB cable.
WARN : 12/10/2019 4:07:08 PM > To put SM-J106F into Download Mode, You have to perform the following steps:
WARN : 12/10/2019 4:07:08 PM > 1. Reconnect the battery.
WARN : 12/10/2019 4:07:08 PM > 2. Press and hold "Volume-" + "Home" + "Power ON" keys.
WARN : 12/10/2019 4:07:08 PM > 3. When phone turns on, press "Volume+" key.
INFO : 12/10/2.019 4:07:08 PM > Waiting for phone...
WARN : 12/10/2019 4:07:08 PM > Advanced mode!
INFO : 12/10/2019 4:07:10 PM > Firmware write started.
INFO : 12/10/2019 4:07:10 PM > Writing Custom section...
INFO : 12/10/2019 4:07:14 PM > Custom section has been written successfully.
INFO : 12/10/2019 4:07:14 PM > Firmware writing successfully completed.
WARN : 12/10/2019 4:07:14 PM > FRP lock is successfully reseted!
BINF : 12/10/2019 4:07:14 PM > Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset"
INFO : 12/10/2019 4:07:14 PM > Performed by 1.8.3.0 Software version.

you can do this job with manual or with any free tool but with octopus job is fast

chipscell25 · 12-10-2019, 20:53

FRP LENOVO TAB E7 TB-7104F
Log file "C:\Program Files\Octoplus\Octoplus_FRP_Tool\LOG\10-12-2019_15-36-49.log" created (10/12/2019 03:36:51 p.m).
INFO : 10/12/2019 03:37:03 p.m > Welcome to Octoplus FRP Tool v.1.8.3.0
INFO : 10/12/2019 03:39:21 p.m > Platform: LENOVO
INFO : 10/12/2019 03:39:21 p.m > Selected model: TB-7104F
WARN : 10/12/2019 03:39:21 p.m > Please, power phone OFF and connect USB cable.
INFO : 10/12/2019 03:39:21 p.m > Searching for a phone. Please wait...
INFO : 10/12/2019 03:39:30 p.m > Found phone on COM86
INFO : 10/12/2019 03:39:31 p.m > Port name: SAMSUNG Mobile USB Modem #173
INFO : 10/12/2019 03:39:31 p.m > Detecting Chip Version...
INFO : 10/12/2019 03:39:31 p.m > HW Chip: MT8167: 8167.0000
INFO : 10/12/2019 03:39:31 p.m > HW Version: 8A00.CB00.0001.0000
INFO : 10/12/2019 03:39:31 p.m > Connecting...
WARN : 10/12/2019 03:39:31 p.m > Brom Version: FF
INFO : 10/12/2019 03:39:31 p.m > BootLoader Version: 01
INFO : 10/12/2019 03:39:31 p.m > Searching Download Agent...
INFO : 10/12/2019 03:39:36 p.m > Selected DA: MTK_AllInOne_DA_v3.3001.2018/03/29.21:38_402229+403250, n.0
INFO : 10/12/2019 03:39:36 p.m > Sending Download Agent...
INFO : 10/12/2019 03:39:36 p.m > DA sent successfully
INFO : 10/12/2019 03:39:36 p.m > Initializing DA...
INFO : 10/12/2019 03:39:36 p.m > Synchronizing with DA...
INFO : 10/12/2019 03:39:36 p.m > Mobile Status: SYNC
INFO : 10/12/2019 03:39:36 p.m > Mobile Status: preloader
INFO : 10/12/2019 03:39:36 p.m > Initializing Memory Flash..
INFO : 10/12/2019 03:39:36 p.m > Initialization successfully completed
INFO : 10/12/2019 03:39:36 p.m > Sending loaders...
INFO : 10/12/2019 03:39:37 p.m > Mobile Status: SYNC
INFO : 10/12/2019 03:39:37 p.m > Reading Flash Info...
INFO : 10/12/2019 03:39:37 p.m > EMMC rpmb size: 4 Mb
INFO : 10/12/2019 03:39:37 p.m > EMMC boot1 size: 4 Mb
INFO : 10/12/2019 03:39:37 p.m > EMMC boot2 size: 4 Mb
INFO : 10/12/2019 03:39:37 p.m > EMMC gp1 size: 0 Mb
INFO : 10/12/2019 03:39:37 p.m > EMMC gp2 size: 0 Mb
INFO : 10/12/2019 03:39:37 p.m > EMMC gp3 size: 0 Mb
INFO : 10/12/2019 03:39:37 p.m > EMMC gp4 size: 0 Mb
INFO : 10/12/2019 03:39:37 p.m > EMMC user area size: 7456 Mb
INFO : 10/12/2019 03:39:37 p.m > eMMC Flash: .90014A48.38473461.32A517E5.A93F856D
INFO : 10/12/2019 03:39:37 p.m > eMMC Flash: Hynix: H8G4a2
INFO : 10/12/2019 03:39:37 p.m > Internal RAM size: 256 Kb
INFO : 10/12/2019 03:39:37 p.m > External RAM size: 1024 Mb
INFO : 10/12/2019 03:39:37 p.m > Reading partition...
INFO : 10/12/2019 03:39:37 p.m > Reading info...
INFO : 10/12/2019 03:39:39 p.m > Brand: Lenovo
INFO : 10/12/2019 03:39:39 p.m > Model: Lenovo TB-7104F
INFO : 10/12/2019 03:39:39 p.m > Device: TB7104F
INFO : 10/12/2019 03:39:39 p.m > Android version: 8.1.0
INFO : 10/12/2019 03:39:39 p.m > Display ID: TB-7104F_S000056_191012_ROW
INFO : 10/12/2019 03:39:39 p.m > Searching for signatures...
INFO : 10/12/2019 03:39:40 p.m > Resetting FRP lock..
WARN : 10/12/2019 03:39:41 p.m > FRP lock is successfully reseted!
INFO : 10/12/2019 03:39:42 p.m > Backup saved as Lenovo_Lenovo TB-7104F_10-12-2019_15-39-41.dump file
INFO : 10/12/2019 03:39:42 p.m > Performed by 1.8.3.0 Software version.
INFO : 10/12/2019 03:39:42 p.m >

chipscell25 · 12-10-2019, 20:53

FRP LENOVO TAB E7 TB-7104F
Log file "C:\Program Files\Octoplus\Octoplus_FRP_Tool\LOG\10-12-2019_15-36-49.log" created (10/12/2019 03:36:51 p.m).
INFO : 10/12/2019 03:37:03 p.m > Welcome to Octoplus FRP Tool v.1.8.3.0
INFO : 10/12/2019 03:39:21 p.m > Platform: LENOVO
INFO : 10/12/2019 03:39:21 p.m > Selected model: TB-7104F
WARN : 10/12/2019 03:39:21 p.m > Please, power phone OFF and connect USB cable.
INFO : 10/12/2019 03:39:21 p.m > Searching for a phone. Please wait...
INFO : 10/12/2019 03:39:30 p.m > Found phone on COM86
INFO : 10/12/2019 03:39:31 p.m > Port name: SAMSUNG Mobile USB Modem #173
INFO : 10/12/2019 03:39:31 p.m > Detecting Chip Version...
INFO : 10/12/2019 03:39:31 p.m > HW Chip: MT8167: 8167.0000
INFO : 10/12/2019 03:39:31 p.m > HW Version: 8A00.CB00.0001.0000
INFO : 10/12/2019 03:39:31 p.m > Connecting...
WARN : 10/12/2019 03:39:31 p.m > Brom Version: FF
INFO : 10/12/2019 03:39:31 p.m > BootLoader Version: 01
INFO : 10/12/2019 03:39:31 p.m > Searching Download Agent...
INFO : 10/12/2019 03:39:36 p.m > Selected DA: MTK_AllInOne_DA_v3.3001.2018/03/29.21:38_402229+403250, n.0
INFO : 10/12/2019 03:39:36 p.m > Sending Download Agent...
INFO : 10/12/2019 03:39:36 p.m > DA sent successfully
INFO : 10/12/2019 03:39:36 p.m > Initializing DA...
INFO : 10/12/2019 03:39:36 p.m > Synchronizing with DA...
INFO : 10/12/2019 03:39:36 p.m > Mobile Status: SYNC
INFO : 10/12/2019 03:39:36 p.m > Mobile Status: preloader
INFO : 10/12/2019 03:39:36 p.m > Initializing Memory Flash..
INFO : 10/12/2019 03:39:36 p.m > Initialization successfully completed
INFO : 10/12/2019 03:39:36 p.m > Sending loaders...
INFO : 10/12/2019 03:39:37 p.m > Mobile Status: SYNC
INFO : 10/12/2019 03:39:37 p.m > Reading Flash Info...
INFO : 10/12/2019 03:39:37 p.m > EMMC rpmb size: 4 Mb
INFO : 10/12/2019 03:39:37 p.m > EMMC boot1 size: 4 Mb
INFO : 10/12/2019 03:39:37 p.m > EMMC boot2 size: 4 Mb
INFO : 10/12/2019 03:39:37 p.m > EMMC gp1 size: 0 Mb
INFO : 10/12/2019 03:39:37 p.m > EMMC gp2 size: 0 Mb
INFO : 10/12/2019 03:39:37 p.m > EMMC gp3 size: 0 Mb
INFO : 10/12/2019 03:39:37 p.m > EMMC gp4 size: 0 Mb
INFO : 10/12/2019 03:39:37 p.m > EMMC user area size: 7456 Mb
INFO : 10/12/2019 03:39:37 p.m > eMMC Flash: .90014A48.38473461.32A517E5.A93F856D
INFO : 10/12/2019 03:39:37 p.m > eMMC Flash: Hynix: H8G4a2
INFO : 10/12/2019 03:39:37 p.m > Internal RAM size: 256 Kb
INFO : 10/12/2019 03:39:37 p.m > External RAM size: 1024 Mb
INFO : 10/12/2019 03:39:37 p.m > Reading partition...
INFO : 10/12/2019 03:39:37 p.m > Reading info...
INFO : 10/12/2019 03:39:39 p.m > Brand: Lenovo
INFO : 10/12/2019 03:39:39 p.m > Model: Lenovo TB-7104F
INFO : 10/12/2019 03:39:39 p.m > Device: TB7104F
INFO : 10/12/2019 03:39:39 p.m > Android version: 8.1.0
INFO : 10/12/2019 03:39:39 p.m > Display ID: TB-7104F_S000056_191012_ROW
INFO : 10/12/2019 03:39:39 p.m > Searching for signatures...
INFO : 10/12/2019 03:39:40 p.m > Resetting FRP lock..
WARN : 10/12/2019 03:39:41 p.m > FRP lock is successfully reseted!
INFO : 10/12/2019 03:39:42 p.m > Backup saved as Lenovo_Lenovo TB-7104F_10-12-2019_15-39-41.dump file
INFO : 10/12/2019 03:39:42 p.m > Performed by 1.8.3.0 Software version.
INFO : 10/12/2019 03:39:42 p.m >

djmurod86 · 12-11-2019, 06:16

Welcome to Octoplus FRP Tool v.1.8.3.0
Platform: HUAWEI
Selected model: MRD-LX1F
Put the phone into Brom mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Searching for a phone. Please wait...
Found phone on COM56
Port name: MediaTek USB Port (COM56)
Detecting Chip Version...
HW Chip: MT6761: 0717.0000
HW Version: 8A00.CA01.0200.0000
Connecting...
Brom Version: 05
BootLoader Version: FE
Sending auth...
Sending Auth Data...
Target Config: 0x000000E5
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018/10/18.17:38_452898, n.1
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: brom
Sending BootLoader Info...
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 16 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 29820 Mb
eMMC Flash: .15010051.4436334D.4201FC0C.07DF85DB
eMMC Flash: Samsung: QD63MB
Internal RAM size: 512 Kb
External RAM size: 2048 Mb
Reading partition...
Reading info...
Android version: 9
Display ID: System 9.1.0.040(05QK)
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as HUAWEI_MRD-LX1F_11-12-2019_10-03-44.dump file
Performed by 1.8.3.0 Software version.

djmurod86 · 12-11-2019, 07:30

Welcome to Octoplus FRP Tool v.1.8.3.0
Platform: VERTEX
Selected model: IMPRESS FUNK
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM104
Port name: SAMSUNG Mobile USB Modem #40
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .8801034E.43617264.2001AE01.612F6551
eMMC Flash: Foresee: NCard
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 512 Mb
Reading partition...
Reading info...
Brand: Vertex
Model: Impress_Funk
Device: Impress_Funk
Android version: 8.1.0
Display ID: 7130D_S8020K_E.A1.20180808.AD80.V21.WVGA.DS84.B18. MP.RU
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Vertex_Impress_Funk_11-12-2019_11-22-40.dump file
Performed by 1.8.3.0 Software version.

djmurod86 · 12-11-2019, 07:51

Platform: __GENERAL RESET FRP METHODS
Selected model: ADB
Searching for a phone (waiting for ADB / Fastboot device)...
Phone found.
Reading info...
Phone model: samsung SM-J701F
SW version: M1AJQ
Date: Wed Sep 26 13:15:38 KST 2018
Android version: 8.1.0
Baseband J701FXXU6BRI1
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.8.3.0 Software version.

Pufi164 · 12-11-2019, 09:48

SUNNY 3 PLUS succeeded:-) like 2 PLUS

Platform: WIKO
Selected model: SUNNY 2 PLUS
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM28
Port name: MediaTek PreLoader USB VCOM (Android) (COM28)
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_Octoplus_v1.0_PL, n.1
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .90014A48.38473461.32A5C171.1CB0B51B
eMMC Flash: Hynix: H8G4a2
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: WIKO
Model: W-K200
Device: W-K200
Android version: 8.1.0
Display ID: O11019 release-keys
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as WIKO_W-K200_11-12-2019_09-40-40.dump file
Performed by 1.8.3.0 Software version.

djmurod86 · 12-11-2019, 12:01

Welcome to Octoplus FRP Tool v.1.8.3.0
Platform: HUAWEI
Selected model: COL-L29
Put the phone into Factory mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint.
Searching for a phone. Please wait...
Found phone on COM157
Checking resource files...
Downloading resources...
Searching for a phone. Please wait...
Found phone on COM157
Setting options...
Writing BOOT...
Downloading resources...
Searching for a phone. Please wait...
Found phone on COM157
Setting options...
Writing BOOT...
Downloading resources...
Searching for a phone. Please wait...
Found phone on COM157
Setting options...
Writing BOOT...
Downloading resources...
Searching for a phone. Please wait...
Found phone on COM157
Setting options...
Writing BOOT...
Switching to FastBoot mode...
Searching for a phone. Please wait...
Detected phone model: COL-L29
Phone SN: CLCxxxxxxxxxxxxxxx
Phone IMEI: 864xxxxxxxxxxxxx
Phone IMEI2: 864xxxxxxxxxxxxx
SW version: COL-L29 9.1.0.325(C10E3R1P13)
FRP lock is successfully reseted!
Performed by 1.8.3.0 Software version.

-=P.F.U=- · 12-11-2019, 13:01

Code:

Welcome to Octoplus FRP Tool v.1.8.3.0
Platform: TECNO
Selected model: SA7S
Please, power phone OFF, press and hold "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM22
Connecting...
Mobile Status: SPRD3
Sending preloader...
Mobile Status: Spreadtrum Boot Block version 1.1
Sending mainloader...
Reading info...
Brand: TECNO
Model: TECNO SA7S
Device: TECNO-SA7S
Android version: 8.1.0
Display ID: SA7S-SA331-8.1-ZA-Voda-V014-20190726
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as TECNO_TECNO SA7S_11-12-2019_09-58-44.dump file
Performed by 1.8.3.0 Software version.

-=P.F.U=- · 12-11-2019, 13:01

Code:

Welcome to Octoplus FRP Tool v.1.8.3.0
Platform: VODAFONE
Selected model: VFD320
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM8
Port name: MediaTek PreLoader USB VCOM (Android) (COM8)
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2017-07-19.22:57, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .70010045.45344544.340112BE.70847517
eMMC Flash: Pretec: EE4ED4
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 2 Mb
EMMC boot2 size: 2 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 3616 Mb
Internal RAM size: 128 Kb
External RAM size: 512 Mb
Reading partition...
Reading info...
Brand: Vodafone
Model: VFD320
Device: VFD320
Platform: mt6580
Android version: 8.1.0
Display ID: O11019 release-keys
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Vodafone_VFD320_11-12-2019_11-03-35.dump file
Performed by 1.8.3.0 Software version.

Dr_Wolodya · 12-11-2019, 13:20

Huawei BG2-U01 Reset FRP successfully done:

Code:

Welcome to Octoplus FRP Tool v.1.8.3.0
Platform: HUAWEI
Selected model: BG2-U01
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: BG2-U01
Phone SN: BBKHGA1918C03306
Phone IMEI: 869483038697775
SW version: BG2-U01C170B173
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.8.3.0 Software version.

djmurod86 · 12-12-2019, 05:54

Platform: SAMSUNG
Selected model: SM-A720F
Searching for a phone (waiting for ADB / Fastboot device)...
Please, press "OK" button on the phone to allow USB debugging..
Reading info...
Detected phone model: SM-A720F
Firmware compiled date: Thu Jun 22 09:23:02 KST 2017
PDA version: A720FXXS2AQF8
CSC version: A720FOXY2AQF8
SW version: A720FXXS2AQF8
Phone SN: R58J13W5QSR
Android version: 6.0.1 (MMB29K)
Sales code: CAC
Country: Central Asia
HW platform: exynos5
HW Chip: exynos7880
HW Modem: SHANNON325
Security patch level: 2017-06-01
Codename: a7y17ltexx
Resetting FRP lock..
FRP lock is successfully reseted!
Goto "Menu->Settings->Backup and reset" and make "Factory data reset"
Performed by 1.8.3.0 Software version.

djmurod86 · 12-12-2019, 08:13

Platform: ALCATEL
Selected model: OT-6039Y
Please, power phone OFF and connect USB cable.
Found phone on COM12
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 007050E100420018
QC CPU: Snapdragon 410 MSM8916
QC SW VER: 00000000
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Checking request..
Reading partition...
Reading info...
Brand: TCL
Model: 6039Y
Device: idol347
Platform: msm8916
Android version: 6.0.1
Display ID: MMB29M release-keys
Firmware version: v1BGH-0
Resetting FRP lock..
Searching for signatures...
FRP lock is successfully reseted!
Rebooting phone
Backup saved as TCL_6039Y_12-12-2019_12-11-21.dump file
Performed by 1.8.3.0 Software version.

apacheadmiral · 12-12-2019, 11:12

Stylo CPE91 FRP lock is successfully reseted!

Welcome to Octoplus FRP Tool v.1.8.3.0
Platform: STYLO
Selected model: S55 NOVA
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM833
Port name: MediaTek PreLoader USB VCOM (Android) (COM833)
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010046.4531324D.420D3A31.CE3184AF
eMMC Flash: Samsung: FE12MB
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 14910 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: STYLO
Model: CPE91
Device: CPE91
Android version: 8.1.0
Display ID: O11019
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as STYLO_CPE91_12-12-2019_12-07-32.dump file
Performed by 1.8.3.0 Software version.

12-11-2019, 06:16	#5285 (permalink)
djmurod86 No Life Poster Join Date: Feb 2007 Location: Inside Posts: 4,133 Member: 455852 Status: Offline Sonork: 100.1596308 Thanks Meter: 1,993	HUAWEI MRD-LX1F FRP DoNe Welcome to Octoplus FRP Tool v.1.8.3.0 Platform: HUAWEI Selected model: MRD-LX1F Put the phone into Brom mode: 1. Attach testpoint as shown in Help manual; 2. Connect USB cable; 3. Release testpoint after 3-5 seconds. Searching for a phone. Please wait... Found phone on COM56 Port name: MediaTek USB Port (COM56) Detecting Chip Version... HW Chip: MT6761: 0717.0000 HW Version: 8A00.CA01.0200.0000 Connecting... Brom Version: 05 BootLoader Version: FE Sending auth... Sending Auth Data... Target Config: 0x000000E5 Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2018/10/18.17:38_452898, n.1 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... Mobile Status: SYNC Mobile Status: brom Sending BootLoader Info... Initializing Memory Flash.. Initialization successfully completed Sending loaders... Mobile Status: SYNC Reading Flash Info... EMMC rpmb size: 16 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 29820 Mb eMMC Flash: .15010051.4436334D.4201FC0C.07DF85DB eMMC Flash: Samsung: QD63MB Internal RAM size: 512 Kb External RAM size: 2048 Mb Reading partition... Reading info... Android version: 9 Display ID: System 9.1.0.040(05QK) Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as HUAWEI_MRD-LX1F_11-12-2019_10-03-44.dump file Performed by 1.8.3.0 Software version.

12-11-2019, 07:30	#5286 (permalink)
djmurod86 No Life Poster Join Date: Feb 2007 Location: Inside Posts: 4,133 Member: 455852 Status: Offline Sonork: 100.1596308 Thanks Meter: 1,993	Vertex Impress_Funk frp DoNe Welcome to Octoplus FRP Tool v.1.8.3.0 Platform: VERTEX Selected model: IMPRESS FUNK Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM104 Port name: SAMSUNG Mobile USB Modem #40 Detecting Chip Version... HW Chip: MT6580: 6580.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.11 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .8801034E.43617264.2001AE01.612F6551 eMMC Flash: Foresee: NCard DA ver: 4.2.9C Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 7456 Mb Internal RAM size: 128 Kb External RAM size: 512 Mb Reading partition... Reading info... Brand: Vertex Model: Impress_Funk Device: Impress_Funk Android version: 8.1.0 Display ID: 7130D_S8020K_E.A1.20180808.AD80.V21.WVGA.DS84.B18. MP.RU Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as Vertex_Impress_Funk_11-12-2019_11-22-40.dump file Performed by 1.8.3.0 Software version.

12-11-2019, 07:51	#5287 (permalink)
djmurod86 No Life Poster Join Date: Feb 2007 Location: Inside Posts: 4,133 Member: 455852 Status: Offline Sonork: 100.1596308 Thanks Meter: 1,993	J701f u6 frp done Platform: __GENERAL RESET FRP METHODS Selected model: ADB Searching for a phone (waiting for ADB / Fastboot device)... Phone found. Reading info... Phone model: samsung SM-J701F SW version: M1AJQ Date: Wed Sep 26 13:15:38 KST 2018 Android version: 8.1.0 Baseband J701FXXU6BRI1 Resetting FRP lock.. FRP lock is successfully reseted! Performed by 1.8.3.0 Software version.

12-10-2019, 20:53	#5283 (permalink)
chipscell25 No Life Poster Join Date: Mar 2011 Location: dominican republic Age: 45 Posts: 2,101 Member: 1537078 Status: Offline Sonork: celular center Thanks Meter: 573	FRP LENOVO TAB E7 TB-7104F Log file "C:\Program Files\Octoplus\Octoplus_FRP_Tool\LOG\10-12-2019_15-36-49.log" created (10/12/2019 03:36:51 p.m). INFO : 10/12/2019 03:37:03 p.m > Welcome to Octoplus FRP Tool v.1.8.3.0 INFO : 10/12/2019 03:39:21 p.m > Platform: LENOVO INFO : 10/12/2019 03:39:21 p.m > Selected model: TB-7104F WARN : 10/12/2019 03:39:21 p.m > Please, power phone OFF and connect USB cable. INFO : 10/12/2019 03:39:21 p.m > Searching for a phone. Please wait... INFO : 10/12/2019 03:39:30 p.m > Found phone on COM86 INFO : 10/12/2019 03:39:31 p.m > Port name: SAMSUNG Mobile USB Modem #173 INFO : 10/12/2019 03:39:31 p.m > Detecting Chip Version... INFO : 10/12/2019 03:39:31 p.m > HW Chip: MT8167: 8167.0000 INFO : 10/12/2019 03:39:31 p.m > HW Version: 8A00.CB00.0001.0000 INFO : 10/12/2019 03:39:31 p.m > Connecting... WARN : 10/12/2019 03:39:31 p.m > Brom Version: FF INFO : 10/12/2019 03:39:31 p.m > BootLoader Version: 01 INFO : 10/12/2019 03:39:31 p.m > Searching Download Agent... INFO : 10/12/2019 03:39:36 p.m > Selected DA: MTK_AllInOne_DA_v3.3001.2018/03/29.21:38_402229+403250, n.0 INFO : 10/12/2019 03:39:36 p.m > Sending Download Agent... INFO : 10/12/2019 03:39:36 p.m > DA sent successfully INFO : 10/12/2019 03:39:36 p.m > Initializing DA... INFO : 10/12/2019 03:39:36 p.m > Synchronizing with DA... INFO : 10/12/2019 03:39:36 p.m > Mobile Status: SYNC INFO : 10/12/2019 03:39:36 p.m > Mobile Status: preloader INFO : 10/12/2019 03:39:36 p.m > Initializing Memory Flash.. INFO : 10/12/2019 03:39:36 p.m > Initialization successfully completed INFO : 10/12/2019 03:39:36 p.m > Sending loaders... INFO : 10/12/2019 03:39:37 p.m > Mobile Status: SYNC INFO : 10/12/2019 03:39:37 p.m > Reading Flash Info... INFO : 10/12/2019 03:39:37 p.m > EMMC rpmb size: 4 Mb INFO : 10/12/2019 03:39:37 p.m > EMMC boot1 size: 4 Mb INFO : 10/12/2019 03:39:37 p.m > EMMC boot2 size: 4 Mb INFO : 10/12/2019 03:39:37 p.m > EMMC gp1 size: 0 Mb INFO : 10/12/2019 03:39:37 p.m > EMMC gp2 size: 0 Mb INFO : 10/12/2019 03:39:37 p.m > EMMC gp3 size: 0 Mb INFO : 10/12/2019 03:39:37 p.m > EMMC gp4 size: 0 Mb INFO : 10/12/2019 03:39:37 p.m > EMMC user area size: 7456 Mb INFO : 10/12/2019 03:39:37 p.m > eMMC Flash: .90014A48.38473461.32A517E5.A93F856D INFO : 10/12/2019 03:39:37 p.m > eMMC Flash: Hynix: H8G4a2 INFO : 10/12/2019 03:39:37 p.m > Internal RAM size: 256 Kb INFO : 10/12/2019 03:39:37 p.m > External RAM size: 1024 Mb INFO : 10/12/2019 03:39:37 p.m > Reading partition... INFO : 10/12/2019 03:39:37 p.m > Reading info... INFO : 10/12/2019 03:39:39 p.m > Brand: Lenovo INFO : 10/12/2019 03:39:39 p.m > Model: Lenovo TB-7104F INFO : 10/12/2019 03:39:39 p.m > Device: TB7104F INFO : 10/12/2019 03:39:39 p.m > Android version: 8.1.0 INFO : 10/12/2019 03:39:39 p.m > Display ID: TB-7104F_S000056_191012_ROW INFO : 10/12/2019 03:39:39 p.m > Searching for signatures... INFO : 10/12/2019 03:39:40 p.m > Resetting FRP lock.. WARN : 10/12/2019 03:39:41 p.m > FRP lock is successfully reseted! INFO : 10/12/2019 03:39:42 p.m > Backup saved as Lenovo_Lenovo TB-7104F_10-12-2019_15-39-41.dump file INFO : 10/12/2019 03:39:42 p.m > Performed by 1.8.3.0 Software version. INFO : 10/12/2019 03:39:42 p.m >

12-10-2019, 20:53	#5284 (permalink)
chipscell25 No Life Poster Join Date: Mar 2011 Location: dominican republic Age: 45 Posts: 2,101 Member: 1537078 Status: Offline Sonork: celular center Thanks Meter: 573	FRP LENOVO TAB E7 TB-7104F Log file "C:\Program Files\Octoplus\Octoplus_FRP_Tool\LOG\10-12-2019_15-36-49.log" created (10/12/2019 03:36:51 p.m). INFO : 10/12/2019 03:37:03 p.m > Welcome to Octoplus FRP Tool v.1.8.3.0 INFO : 10/12/2019 03:39:21 p.m > Platform: LENOVO INFO : 10/12/2019 03:39:21 p.m > Selected model: TB-7104F WARN : 10/12/2019 03:39:21 p.m > Please, power phone OFF and connect USB cable. INFO : 10/12/2019 03:39:21 p.m > Searching for a phone. Please wait... INFO : 10/12/2019 03:39:30 p.m > Found phone on COM86 INFO : 10/12/2019 03:39:31 p.m > Port name: SAMSUNG Mobile USB Modem #173 INFO : 10/12/2019 03:39:31 p.m > Detecting Chip Version... INFO : 10/12/2019 03:39:31 p.m > HW Chip: MT8167: 8167.0000 INFO : 10/12/2019 03:39:31 p.m > HW Version: 8A00.CB00.0001.0000 INFO : 10/12/2019 03:39:31 p.m > Connecting... WARN : 10/12/2019 03:39:31 p.m > Brom Version: FF INFO : 10/12/2019 03:39:31 p.m > BootLoader Version: 01 INFO : 10/12/2019 03:39:31 p.m > Searching Download Agent... INFO : 10/12/2019 03:39:36 p.m > Selected DA: MTK_AllInOne_DA_v3.3001.2018/03/29.21:38_402229+403250, n.0 INFO : 10/12/2019 03:39:36 p.m > Sending Download Agent... INFO : 10/12/2019 03:39:36 p.m > DA sent successfully INFO : 10/12/2019 03:39:36 p.m > Initializing DA... INFO : 10/12/2019 03:39:36 p.m > Synchronizing with DA... INFO : 10/12/2019 03:39:36 p.m > Mobile Status: SYNC INFO : 10/12/2019 03:39:36 p.m > Mobile Status: preloader INFO : 10/12/2019 03:39:36 p.m > Initializing Memory Flash.. INFO : 10/12/2019 03:39:36 p.m > Initialization successfully completed INFO : 10/12/2019 03:39:36 p.m > Sending loaders... INFO : 10/12/2019 03:39:37 p.m > Mobile Status: SYNC INFO : 10/12/2019 03:39:37 p.m > Reading Flash Info... INFO : 10/12/2019 03:39:37 p.m > EMMC rpmb size: 4 Mb INFO : 10/12/2019 03:39:37 p.m > EMMC boot1 size: 4 Mb INFO : 10/12/2019 03:39:37 p.m > EMMC boot2 size: 4 Mb INFO : 10/12/2019 03:39:37 p.m > EMMC gp1 size: 0 Mb INFO : 10/12/2019 03:39:37 p.m > EMMC gp2 size: 0 Mb INFO : 10/12/2019 03:39:37 p.m > EMMC gp3 size: 0 Mb INFO : 10/12/2019 03:39:37 p.m > EMMC gp4 size: 0 Mb INFO : 10/12/2019 03:39:37 p.m > EMMC user area size: 7456 Mb INFO : 10/12/2019 03:39:37 p.m > eMMC Flash: .90014A48.38473461.32A517E5.A93F856D INFO : 10/12/2019 03:39:37 p.m > eMMC Flash: Hynix: H8G4a2 INFO : 10/12/2019 03:39:37 p.m > Internal RAM size: 256 Kb INFO : 10/12/2019 03:39:37 p.m > External RAM size: 1024 Mb INFO : 10/12/2019 03:39:37 p.m > Reading partition... INFO : 10/12/2019 03:39:37 p.m > Reading info... INFO : 10/12/2019 03:39:39 p.m > Brand: Lenovo INFO : 10/12/2019 03:39:39 p.m > Model: Lenovo TB-7104F INFO : 10/12/2019 03:39:39 p.m > Device: TB7104F INFO : 10/12/2019 03:39:39 p.m > Android version: 8.1.0 INFO : 10/12/2019 03:39:39 p.m > Display ID: TB-7104F_S000056_191012_ROW INFO : 10/12/2019 03:39:39 p.m > Searching for signatures... INFO : 10/12/2019 03:39:40 p.m > Resetting FRP lock.. WARN : 10/12/2019 03:39:41 p.m > FRP lock is successfully reseted! INFO : 10/12/2019 03:39:42 p.m > Backup saved as Lenovo_Lenovo TB-7104F_10-12-2019_15-39-41.dump file INFO : 10/12/2019 03:39:42 p.m > Performed by 1.8.3.0 Software version. INFO : 10/12/2019 03:39:42 p.m >

12-11-2019, 09:48	#5288 (permalink)
Pufi164 No Life Poster Join Date: Oct 2004 Location: Budapest Age: 54 Posts: 1,937 Member: 87188 Status: Offline Thanks Meter: 227	SUNNY 3 PLUS succeeded:-) like 2 PLUS Platform: WIKO Selected model: SUNNY 2 PLUS Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM28 Port name: MediaTek PreLoader USB VCOM (Android) (COM28) Detecting Chip Version... HW Chip: MT6580: 6580.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_Octoplus_v1.0_PL, n.1 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .90014A48.38473461.32A5C171.1CB0B51B eMMC Flash: Hynix: H8G4a2 DA ver: 4.2.9C Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 7456 Mb Internal RAM size: 128 Kb External RAM size: 1024 Mb Reading partition... Reading info... Brand: WIKO Model: W-K200 Device: W-K200 Android version: 8.1.0 Display ID: O11019 release-keys Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as WIKO_W-K200_11-12-2019_09-40-40.dump file Performed by 1.8.3.0 Software version.

12-11-2019, 12:01	#5289 (permalink)
djmurod86 No Life Poster Join Date: Feb 2007 Location: Inside Posts: 4,133 Member: 455852 Status: Offline Sonork: 100.1596308 Thanks Meter: 1,993	Huawei COL-L29 FRP DONE Welcome to Octoplus FRP Tool v.1.8.3.0 Platform: HUAWEI Selected model: COL-L29 Put the phone into Factory mode: 1. Attach testpoint as shown in Help manual; 2. Connect USB cable; 3. Release testpoint. Searching for a phone. Please wait... Found phone on COM157 Checking resource files... Downloading resources... Searching for a phone. Please wait... Found phone on COM157 Setting options... Writing BOOT... Downloading resources... Searching for a phone. Please wait... Found phone on COM157 Setting options... Writing BOOT... Downloading resources... Searching for a phone. Please wait... Found phone on COM157 Setting options... Writing BOOT... Downloading resources... Searching for a phone. Please wait... Found phone on COM157 Setting options... Writing BOOT... Switching to FastBoot mode... Searching for a phone. Please wait... Detected phone model: COL-L29 Phone SN: CLCxxxxxxxxxxxxxxx Phone IMEI: 864xxxxxxxxxxxxx Phone IMEI2: 864xxxxxxxxxxxxx SW version: COL-L29 9.1.0.325(C10E3R1P13) FRP lock is successfully reseted! Performed by 1.8.3.0 Software version.

12-12-2019, 05:54	#5293 (permalink)
djmurod86 No Life Poster Join Date: Feb 2007 Location: Inside Posts: 4,133 Member: 455852 Status: Offline Sonork: 100.1596308 Thanks Meter: 1,993	Samsung sm-a720f frp done Platform: SAMSUNG Selected model: SM-A720F Searching for a phone (waiting for ADB / Fastboot device)... Please, press "OK" button on the phone to allow USB debugging.. Reading info... Detected phone model: SM-A720F Firmware compiled date: Thu Jun 22 09:23:02 KST 2017 PDA version: A720FXXS2AQF8 CSC version: A720FOXY2AQF8 SW version: A720FXXS2AQF8 Phone SN: R58J13W5QSR Android version: 6.0.1 (MMB29K) Sales code: CAC Country: Central Asia HW platform: exynos5 HW Chip: exynos7880 HW Modem: SHANNON325 Security patch level: 2017-06-01 Codename: a7y17ltexx Resetting FRP lock.. FRP lock is successfully reseted! Goto "Menu->Settings->Backup and reset" and make "Factory data reset" Performed by 1.8.3.0 Software version.

12-12-2019, 08:13	#5294 (permalink)
djmurod86 No Life Poster Join Date: Feb 2007 Location: Inside Posts: 4,133 Member: 455852 Status: Offline Sonork: 100.1596308 Thanks Meter: 1,993	Alcatal 6039Y FRp DONE Platform: ALCATEL Selected model: OT-6039Y Please, power phone OFF and connect USB cable. Found phone on COM12 Mode: Qualcomm 9008 Connecting... Reading info... QC HW ID: 007050E100420018 QC CPU: Snapdragon 410 MSM8916 QC SW VER: 00000000 Searching loader... Sending loaders... Loader send successfuly. Reconnecting... Checking request.. Checking request.. Reading partition... Reading info... Brand: TCL Model: 6039Y Device: idol347 Platform: msm8916 Android version: 6.0.1 Display ID: MMB29M release-keys Firmware version: v1BGH-0 Resetting FRP lock.. Searching for signatures... FRP lock is successfully reseted! Rebooting phone Backup saved as TCL_6039Y_12-12-2019_12-11-21.dump file Performed by 1.8.3.0 Software version.

12-12-2019, 11:12	#5295 (permalink)
apacheadmiral No Life Poster Join Date: Apr 2008 Location: South Africa Posts: 708 Member: 746586 Status: Offline Thanks Meter: 205	Stylo CPE91 FRP lock is successfully reseted! Welcome to Octoplus FRP Tool v.1.8.3.0 Platform: STYLO Selected model: S55 NOVA Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM833 Port name: MediaTek PreLoader USB VCOM (Android) (COM833) Detecting Chip Version... HW Chip: MT6580: 6580.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.11 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .15010046.4531324D.420D3A31.CE3184AF eMMC Flash: Samsung: FE12MB DA ver: 4.2.9C Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 14910 Mb Internal RAM size: 128 Kb External RAM size: 1024 Mb Reading partition... Reading info... Brand: STYLO Model: CPE91 Device: CPE91 Android version: 8.1.0 Display ID: O11019 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as STYLO_CPE91_12-12-2019_12-07-32.dump file Performed by 1.8.3.0 Software version.