|
Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. Only registered members may post questions, contact other members or search our database of over 8 million posts. Registration is fast, simple and absolutely free so please - Click to REGISTER! If you have any problems with the registration process or your account login, please contact contact us . |
|
Register | FAQ | Donate | Forum Rules | Root any Device | ★iPhone Unlock★ | ★ Direct Codes ★ | Direct Unlock Source |
| LinkBack | Thread Tools | Display Modes |
02-23-2021, 06:29 | #6436 (permalink) |
Freak Poster Join Date: Oct 2010 Location: USA
Posts: 350
Member: 1420095 Status: Offline Thanks Meter: 216 | Motorola Z3 FRP Success! Platform: MOTOROLA Selected model: XT1929-17 Put the phone into Factory Mode: 1. Power phone OFF; 2. Press and hold "Vol-" + "Power" buttons; 3. Select Factory Mode, then confirm your selection; 4. Wait until the phone Power ON; 5. Connect USB cable. Searching for a phone. Please wait... Phone found. Reading info... Phone model: 8998.gen: Firmware released date: Jun 12 2018 Firmware released time: 14:47:15 Firmware compiled date: Jun 07 2018 Firmware compiled time: 11:00:00 SW version: MPSS.AT.2.5.c1.3-00037-8998_GEN_PACK-1 Enabling "USB Debugging" mode... Searching for a phone (waiting for ADB / Fastboot device)... ADB server killed. Please, press "OK" button on the phone to allow USB debugging.. Phone found. Reading info... Phone model: motorola moto z3 SW version: ODXS28.66-18-4 Date: Fri Oct 19 01:53:54 CDT 2018 Android version: 8.1.0 Baseband M8998_35.37.02.72R MNS Detected phone model: XT1929-17 Resetting FRP lock.. FRP lock is successfully reseted! Performed by 1.9.9.2 Software version. |
The Following User Says Thank You to himig_natin For This Useful Post: |
02-24-2021, 19:55 | #6437 (permalink) |
No Life Poster Join Date: Jun 2013 Location: BANGLADESH+UAE Age: 34
Posts: 829
Member: 1969978 Status: Offline Sonork: 100.1613242 Thanks Meter: 693 | Reading info... Please, press "OK" button on the phone to allow USB debugging.. Proper android device not found. Make sure that "USB debug" option on the device is turned on. Please, press "OK" button on the phone to allow USB debugging.. Detected phone model: SM-G532F Firmware compiled date: Thu Jul 12 19:36:27 KST 2018 PDA version: G532FXWU1ARG4 CSC version: G532FOJV1ARG3 SW version: G532FXXU1ARF3 Phone SN: RZ8KA2BMHBJ Android version: 6.0.1 (MMB29T) Sales code: XSG Country: UAE HW platform: mt6737t HW Chip: MT6737T HW Modem: MT6737T Security patch level: 2018-07-01 Codename: grandpplteser Resetting FRP lock.. FRP lock is successfully reseted! Goto "Menu->Settings->Backup and reset" and make "Factory data reset" Performed by 1.9.9.2 Software version. |
The Following User Says Thank You to maxmobilephone For This Useful Post: |
02-25-2021, 06:09 | #6438 (permalink) |
Freak Poster Join Date: Oct 2010 Location: USA
Posts: 350
Member: 1420095 Status: Offline Thanks Meter: 216 | Nokia 2.1 (TA-1093) FRP Success! Welcome to Octoplus FRP Tool v.1.9.9.2 Work ID: 0000000000A30C7C Platform: NOKIA Selected model: TA-1093 Put the phone into EDL mode: 1. Attach testpoint as shown in Help manual; 2. Connect USB cable; 3. Release testpoint after 3-5 seconds. Found phone on COM18 Mode: Qualcomm 9008 Connecting... Reading info... QC HW ID: 000560E100000000 QC CPU: Snapdragon 425 MSM8917 QC SW VER: 00000000 Searching loader... Sending loaders... Loader send successfuly. Reconnecting... Checking request.. Reading partition... Reading info... Android version: 10 Display ID: 00WW_4_11F Firmware version: 00WW_4_11F Resetting FRP lock.. Searching for signatures... FRP lock is successfully reseted! Performed by 1.9.9.2 Software version. |
The Following User Says Thank You to himig_natin For This Useful Post: |
02-25-2021, 06:39 | #6439 (permalink) |
No Life Poster Join Date: Aug 2014
Posts: 658
Member: 2233266 Status: Offline Thanks Meter: 252 | Welcome to Octoplus FRP Tool v.1.9.9.0 Card S/N: 01009072 Work ID: 0000000000A306F6 Platform: HUAWEI Selected model: LUA-U22 Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM3 Port name: MediaTek PreLoader USB VCOM_V1633 (Android) (COM3) Detecting Chip Version... HW Chip: MT6582: 6582.0000 HW Version: 8A00.CA01.0001.0000 Connecting... Target Config: 0000 Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_Octoplus_v1.1, n.2 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .15010046.4E31324D.4206847C.A098637B eMMC Flash: Samsung: FN12MB DA ver: 4.2.87 Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 0 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 7456 Mb Internal RAM size: 128 Kb External RAM size: 1024 Mb Reading partition... Reading partition... Reading info... Brand: HUAWEI Manufacturer: HUAWEI Model: HUAWEI LUA-U22 Device: HWLUA-U6582 Platform: mt6582 Android version: 5.1 Display ID: LUA-U22C567B014 Searching for signatures... Resetting FRP lock.. Backup saved as HUAWEI_HUAWEI LUA-U22_25-02-2021_10-00-05.dump file FRP lock is successfully reseted! Performed by 1.9.9.0 Software version. |
02-26-2021, 11:24 | #6440 (permalink) |
No Life Poster Join Date: Oct 2009 Location: serbia Age: 44
Posts: 971
Member: 1131244 Status: Offline Sonork: 100.1596724 Thanks Meter: 376 | Coolpad E570 factory reset method 2 success Code: Work ID: 0000000000A4C636 Platform: COOLPAD Selected model: E570 Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM14 Port name: MediaTek PreLoader USB VCOM_V1632 (Android) (COM14) Detecting Chip Version... HW Chip: MT6737: 0335.0000 HW Version: 8A00.CB00.0000.0000 Connecting... Target Config: 0000 Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.10 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .90014A48.38473165.050757A2.6D66597B eMMC Flash: Hynix: H8G1e DA ver: 4.2.9B Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 7456 Mb Internal RAM size: 128 Kb External RAM size: 1024 Mb Reading partition... Reading info... Brand: Coolpad Manufacturer: Coolpad Model: Coolpad E570 Device: CP8722_U00 Platform: mt6735m Android version: 5.1 Display ID: 5.1.039.P0.160906.8722_U00 Factory Reset... Starting switching to high-speed mode... Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM39 Switching to high-speed success! Writing userdata... Writing cache... Factory Reset is successfully performed! Performed by 1.9.9.2 Software version. |
02-27-2021, 12:59 | #6441 (permalink) |
Freak Poster Join Date: Mar 2006 Location: Pakistan Age: 44
Posts: 482
Member: 240756 Status: Offline Thanks Meter: 90 | LENOVO TB-X304F FRP Done Successfully Work ID: 0000000000A643B7 Platform: LENOVO Selected model: TB-X304F Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable. Found phone on COM9 Mode: Qualcomm 9008 Connecting... Reading info... QC HW ID: 000550E100000000 QC CPU: Snapdragon 425 APQ8017 QC SW VER: 00000000 Searching loader... Sending loaders... Loader send successfuly. Reconnecting... Checking request.. Reading partition... Reading info... Brand: Lenovo Model: Lenovo TB-X304F Device: X304F Platform: msm8937 Android version: 7.1.1 Display ID: TB-X304F_S000053_180927_ROW Firmware version: TB-X304F_S000053_180927_ROW Resetting FRP lock.. Searching for signatures... FRP lock is successfully reseted! Performed by 1.9.9.2 Software version. |
02-27-2021, 13:20 | #6442 (permalink) |
No Life Poster Join Date: Jul 2004 Location: Ukraine Age: 44
Posts: 2,727
Member: 75408 Status: Offline Thanks Meter: 1,190 | Xiaomi Redmi 7A Unbrick by writing firmware without authentication successfully done: Code: Work ID: 0000000000A647C6 Platform: XIAOMI Selected model: REDMI 7A Writing phone firmware without real necessity is at your own risk. Downgrade may lead to phone damage! Please, before firmware write, disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Android-based devices). Dont run any other programs or attach new devices to your computer during the flashing procedure! Don’t turn off phone and don’t disconnect cable during firmware write. Please, follow these simple instructions to avoid phone damage. Put the phone into EDL mode: 1. Attach testpoint as shown in Help manual; 2. Connect USB cable; 3. Release testpoint after 3-5 seconds. Found phone on COM60 Mode: Qualcomm 9008 Connecting... Reading info... QC HW ID: 000BF0E100720000 QC CPU: Snapdragon 439 SDM439 QC SW VER: 00000001 Searching loader... Sending loaders... Loader send successfuly. Reconnecting... Checking request.. Start Authentication... Authentication done! Checking request.. Reading partition... Reading info... Android version: 10 Firmware version: V11.0.5.0.QCMMIXM Writing firmware... Selected firmware files: C:\1\pine_global_images_V10.2.5.0.PCMMIXM_20190805.0000.00_9.0_global\images\rawprogram0.xml C:\1\pine_global_images_V10.2.5.0.PCMMIXM_20190805.0000.00_9.0_global\images\patch0.xml Opening "C:\1\pine_global_images_V10.2.5.0.PCMMIXM_20190805.0000.00_9.0_global\images\rawprogram0.xml"... Writing sec... Writing vbmeta... Writing vbmetabak... Writing devcfg... Writing devcfgbak... Writing apdp... Writing msadp... Writing sbl1... Writing sbl1bak... Writing rpm... Writing rpmbak... Writing cmnlib... Writing cmnlibbak... Writing cmnlib64... Writing cmnlib64bak... Writing keymaster... Writing keymasterbak... Writing misc... Writing aboot... Writing abootbak... Writing tz... Writing tzbak... Writing dtbo... Writing dtbobak... Writing splash... Writing dsp... Writing dspbak... Writing mdtp... Writing mdtpbak... Writing boot... Writing recovery... Writing cache... Writing modem... Writing system... Writing vendor... Writing cust... Writing userdata... Writing PrimaryGPT... Writing BackupGPT... Opening "C:\1\pine_global_images_V10.2.5.0.PCMMIXM_20190805.0000.00_9.0_global\images\patch0.xml"... Writing Patch... Firmware Write successfully. Performed by 1.9.9.2 Software version. |
02-27-2021, 13:43 | #6443 (permalink) |
No Life Poster Join Date: Jul 2004 Location: Ukraine Age: 44
Posts: 2,727
Member: 75408 Status: Offline Thanks Meter: 1,190 | Xiaomi Redmi 7A (pine, m1903c3eg) Reset FRP done without authentication: Code: Welcome to Octoplus FRP Tool v.1.9.9.2 Card S/N: 02028E78 Work ID: 0000000000A65433 Platform: XIAOMI Selected model: REDMI 7A Put the phone into EDL mode: 1. Attach testpoint as shown in Help manual; 2. Connect USB cable; 3. Release testpoint after 3-5 seconds. Found phone on COM60 Mode: Qualcomm 9008 Connecting... Reading info... QC HW ID: 000BF0E100720000 QC CPU: Snapdragon 439 SDM439 QC SW VER: 00000001 Searching loader... Sending loaders... Loader send successfuly. Reconnecting... Checking request.. Start Authentication... Authentication done! Checking request.. Reading partition... Reading info... Brand: Xiaomi Model: Redmi 7A Device: pine Android version: 9 Display ID: ZQL1533-pine-build-20190805184733 Firmware version: V10.2.5.0.PCMMIXM Resetting FRP lock.. Searching for signatures... FRP lock is successfully reseted! Performed by 1.9.9.2 Software version. |
The Following User Says Thank You to Dr_Wolodya For This Useful Post: |
03-01-2021, 19:35 | #6444 (permalink) |
No Life Poster Join Date: Jul 2004 Location: Ukraine Age: 44
Posts: 2,727
Member: 75408 Status: Offline Thanks Meter: 1,190 | OnePlus 3T (A3010) Reset FRP done: Code: Welcome to Octoplus FRP Tool v.1.9.9.2 Card S/N: 02028E78 Work ID: 0000000000A956D8 Platform: ONEPLUS Selected model: A3010 Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable. Found phone on COM24 Mode: Qualcomm 9008 Connecting... Reading info... QC HW ID: 0005F0E12A703DB9 QC CPU: Snapdragon 821 MSM8996AC Pro QC SW VER: 00000000 Searching loader... Sending loaders... Loader send successfuly. Reconnecting... Chip SN: 6D67B18C Checking request.. Checking request.. Reading partition... Reading info... Brand: OnePlus Platform: msm8996 Android version: 6.0.1 Firmware version: 63 Resetting FRP lock.. Searching for signatures... FRP lock is successfully reseted! Performed by 1.9.9.2 Software version. |
03-04-2021, 09:28 | #6445 (permalink) |
Insane Poster Join Date: May 2003 Location: Poland Sosnowiec
Posts: 99
Member: 29442 Status: Offline Thanks Meter: 12 | Kruger&Matz Eagle805 KM0805.1 Hold Volume + Work ID: 0000000000AD2547 Platform: KRUGER & MATZ Selected model: EAGLE 961 Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM10 Port name: SAMSUNG Mobile USB Modem #577 Detecting Chip Version... HW Chip: MT6737: 0335.0000 HW Version: 8A00.CB00.0000.0000 Connecting... Target Config: 0000 Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.10 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .15010038.57504433.52003FD3.EA89A2AB eMMC Flash: Samsung: 8WPD3R DA ver: 4.2.9B Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 0 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 7456 Mb Internal RAM size: 128 Kb External RAM size: 1024 Mb Reading partition... Reading info... Brand: Kruger_Matz Manufacturer: Kruger&Matz Model: KM0805_1 Device: EAGLE_KM0805_1 Platform: mt6737m |
03-07-2021, 08:40 | #6446 (permalink) | |
Freak Poster Join Date: Feb 2017 Location: Uzbekiston
Posts: 109
Member: 2684254 Status: Offline Sonork: 1-212-228-9600 Thanks Meter: 64 | INOI 2 Lite 2019 FRP Success! Quote:
| |
03-09-2021, 13:00 | #6447 (permalink) |
Freak Poster Join Date: Jan 2018 Location: Gujranwala punjab pakistan
Posts: 110
Member: 2803352 Status: Offline Thanks Meter: 77 | OPPO A57 (CPH1701) User Lock Remove Without Data Loss Platform: OPPO Selected model: A57 (CPH1701) Selected port: COM12 Selected port: Qualcomm HS-USB QDLoader 9008 (COM12) Mode: Qualcomm 9008 Connecting... Reading info... QC HW ID: 0006B0E100000000 QC CPU: Snapdragon 435 MSM8940 QC SW VER: 00000000 Searching loader... Sending loaders... Loader send successfuly. Reconnecting... Checking request.. Reading partition... Reading info... Brand: OPPO Model: CPH1701 Device: CPH1701 Platform: msm8937 Android version: 6.0.1 Display ID: CPH1701EX_11_A.34_180806 Firmware version: eng.root.20180806.181819 Disabling screen lock... Getting start parameters Searching files... Writing patch... Disable screen lock is succesfully performed! Performed by 1.9.9.2 Software version. |
03-10-2021, 18:12 | #6448 (permalink) |
Freak Poster Join Date: Jun 2015 Location: Mashhad-Iran
Posts: 137
Member: 2403164 Status: Offline Thanks Meter: 20 | Welcome to Octoplus FRP Tool v.1.9.6.0 Card S/N: 00005679 Work ID: 11959169 Platform: __GENERAL RESET FRP METHODS Selected model: SC9863A SIGN V4 Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM22 Connecting... Mobile Status: SPRD3 Sending preloader... Mobile Status: Spreadtrum Boot Block version 1.1 Sending mainloader... Reading info... Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Performed by 1.9.6.0 Software version. |
03-12-2021, 11:45 | #6449 (permalink) |
Junior Member Join Date: Sep 2020 Location: turkey Age: 39
Posts: 27
Member: 2968254 Status: Offline Sonork: firat ayrılmazkardes Thanks Meter: 0 | Alcatelr pop 4s ( ot-5095k ) Platform: ALCATEL Selected model: OT-5095K Put the phone into Recovery mode: 1. Power phone OFF; 2. Press and hold "Vol+" + "Power" buttons; 3. Select "Enable ADB" option; 4. Select "Reboot System now" option; 5. Wait until the phone Power ON; 6. Connect USB cable. Performed by 1.9.9.2 Software version. NOT SEE THE PHONE NOT MADE A FRP |
03-12-2021, 17:11 | #6450 (permalink) |
No Life Poster Join Date: Jul 2004 Location: Ukraine Age: 44
Posts: 2,727
Member: 75408 Status: Offline Thanks Meter: 1,190 | Coolpad CP3632a Reset FRP done: Code: Welcome to Octoplus FRP Tool v.1.9.9.2 Card S/N: 02028E78 Work ID: 0000000000B95161 Platform: COOLPAD Selected model: CP3632A Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable. Found phone on COM24 Mode: Qualcomm 9008 Connecting... Reading info... QC HW ID: 000560E100480000 QC CPU: Snapdragon 425 MSM8917 QC SW VER: 00000000 Searching loader... Sending loaders... Loader send successfuly. Reconnecting... Checking request.. Reading partition... Reading info... Brand: Coolpad Model: Coolpad 3632A Device: cp3632a Platform: msm8937 Android version: 7.1.1 Display ID: 7.1.108.56.P2.170511.NMF26F.MPCS Firmware version: 108560743 Resetting FRP lock.. Searching for signatures... FRP lock is successfully reseted! Performed by 1.9.9.2 Software version. |
Bookmarks |
| |
|