Nokia 6 frp tool not detecting need help badly - GSM-Forum

masimobilecare · 07-05-2018, 13:26

hello team i have activated Ntool with 20 credits
am trying to perform frp operation tool is not detecting need help please
All drivers installed
Am trying to connect device in off mode
But Ntool is not detected .!!!
Is that am doing wrong need help badly

the_laser · 07-05-2018, 14:24

http://forum.gsmhosting.com/vbb/f105.../#post13174070

masimobilecare · 07-06-2018, 15:00

hello frp done with clean os
but still device frp locked & credit consume
please help

Code:

7/5/2018 4:34:45 PM RUNNING NTool 0.034
7/5/2018 4:35:19 PM request denied.
7/5/2018 4:35:19 PM Elapsed: 1 secs.
7/5/2018 4:35:23 PM SERVER CREDITS LEFT/USED: 20/0
7/5/2018 4:35:23 PM Elapsed: 0 secs.
7/5/2018 4:35:40 PM PLEASE CONNECT POWERED OFF PHONE
7/5/2018 4:40:15 PM PROCEDURE STOPPED BY USER
7/5/2018 4:40:17 PM Elapsed: 275 secs.
7/5/2018 4:40:28 PM PROCEDURE STOPPED BY USER
7/5/2018 4:40:29 PM Elapsed: 10 secs.
7/5/2018 4:44:20 PM PLEASE CONNECT POWERED OFF PHONE
7/5/2018 4:48:36 PM PROCEDURE STOPPED BY USER
7/5/2018 4:48:37 PM Elapsed: 256 secs.
7/5/2018 5:03:42 PM PROCEDURE STOPPED BY USER
7/5/2018 5:03:43 PM Elapsed: 3 secs.
7/5/2018 5:03:44 PM PLEASE CONNECT POWERED OFF PHONE
7/5/2018 5:17:01 PM PROCEDURE STOPPED BY USER
7/5/2018 5:17:01 PM Elapsed: 797 secs.
7/5/2018 5:19:00 PM PLEASE CONNECT POWERED OFF PHONE
7/5/2018 5:33:54 PM PROCEDURE STOPPED BY USER
7/5/2018 5:33:54 PM Elapsed: 894 secs.
7/5/2018 5:35:29 PM PLEASE CONNECT POWERED OFF PHONE
7/5/2018 5:38:49 PM PROCEDURE STOPPED BY USER
7/5/2018 5:38:49 PM Elapsed: 200 secs.
7/5/2018 5:39:16 PM FATAL ERROR: failed, err: [error: Invalid argument: cannot open transport registration socketpair
* daemon not running. starting it now on port 5057 *
could not read ok from ADB Server
* failed to start daemon *
error: cannot connect to daemon
]
7/5/2018 5:39:16 PM Elapsed: 22 secs.
7/5/2018 5:39:28 PM PLEASE CONNECT POWERED OFF PHONE
7/5/2018 5:39:44 PM PROCEDURE STOPPED BY USER
7/5/2018 5:39:45 PM Elapsed: 17 secs.
7/5/2018 5:51:49 PM PROCEDURE STOPPED BY USER
7/5/2018 5:51:49 PM Elapsed: 724 secs.
7/5/2018 5:51:57 PM SERVER CREDITS LEFT/USED: 20/0
7/5/2018 5:51:57 PM Elapsed: 1 secs.
7/5/2018 5:52:01 PM request denied.
7/5/2018 5:52:01 PM Elapsed: 0 secs.
7/5/2018 5:52:03 PM SERVER CREDITS LEFT/USED: 20/0
7/5/2018 5:52:03 PM Elapsed: 0 secs.


7/6/2018 6:28:39 PM RUNNING NTool 0.034
7/6/2018 6:29:39 PM SERVER CREDITS LEFT/USED: 20/0
7/6/2018 6:29:39 PM Elapsed: 0 secs.
7/6/2018 6:29:44 PM PLEASE CONNECT POWERED OFF PHONE
7/6/2018 6:30:18 PM PHONE "PLEGAR1792804108" CONNECTED
7/6/2018 6:30:18 PM ProjectCode : PLE
7/6/2018 6:30:19 PM model : PAD
7/6/2018 6:30:19 PM sub_model : none
7/6/2018 6:30:19 PM software version : PLE-522C-0-00A0-B01
7/6/2018 6:30:19 PM SW model : 00A0
7/6/2018 6:30:19 PM build number : B01
7/6/2018 6:30:19 PM hardware version : 5.1
7/6/2018 6:30:19 PM RF band id : 
7/6/2018 6:30:19 PM _850_900_1800_1900^W_1_2_5_8^L_1_3_5_7_8_20_28_38_40
7/6/2018 6:30:19 PM chip version : none
7/6/2018 6:30:19 PM MCP info : none
7/6/2018 6:30:19 PM EMMC version : Hynix 5.1 32GB
7/6/2018 6:30:19 PM secure : yes
7/6/2018 6:30:19 PM Bootloader type : commercial
7/6/2018 6:30:19 PM Download size : 00000511 mB
7/6/2018 6:30:20 PM Security version : 0004
7/6/2018 6:30:20 PM Challenge : 83c16959ac6b9e62badb86cd39988bd7cc3c2495
7/6/2018 6:30:21 PM Waiting for calculation process ...
7/6/2018 6:30:21 PM RESPONSE: "SUCCESS" [256]
7/6/2018 6:30:21 PM BOOTLOADER AUTH PASSED
7/6/2018 6:30:21 PM Flash "D1C-0-5600-emmc_appsboot_service.zip" to "aboot"
7/6/2018 6:30:22 PM PHONE "PLEGAR1792804108" REMOVED
7/6/2018 6:30:24 PM PHONE "PLEGAR1792804108" CONNECTED
7/6/2018 6:30:24 PM Security version : 0004
7/6/2018 6:30:24 PM ProjectCode : PLE
7/6/2018 6:30:24 PM UID : 8bc393f9f917dabb60730f3ec1ac407c69ccafe4
7/6/2018 6:30:24 PM Waiting for calculation process ...
7/6/2018 6:30:25 PM RESPONSE: "SUCCESS" [256]
7/6/2018 6:30:25 PM SERVICE AUTH PASSED
7/6/2018 6:30:25 PM Flash "D1C-0-5600-ftm.img" to "ftmboot"
7/6/2018 6:30:26 PM Flash "D1C-0-5600-emmc_appsboot.mbn" to "aboot"
7/6/2018 6:30:26 PM FRP partition erased
7/6/2018 6:30:26 PM Elapsed: 8 secs.
7/6/2018 6:30:41 PM request denied.
7/6/2018 6:30:41 PM Elapsed: 0 secs.
7/6/2018 6:30:43 PM SERVER CREDITS LEFT/USED: 10/10
7/6/2018 6:30:43 PM Elapsed: 0 secs.
7/6/2018 6:51:08 PM PLEASE CONNECT POWERED OFF PHONE
7/6/2018 6:51:24 PM PHONE "PLEGAR1792804108" CONNECTED
7/6/2018 6:51:24 PM ProjectCode : PLE
7/6/2018 6:51:24 PM model : PAD
7/6/2018 6:51:24 PM sub_model : none
7/6/2018 6:51:24 PM software version : PLE-522C-0-00A0-B01
7/6/2018 6:51:24 PM SW model : 00A0
7/6/2018 6:51:24 PM build number : B01
7/6/2018 6:51:24 PM hardware version : 5.1
7/6/2018 6:51:24 PM RF band id : 
7/6/2018 6:51:24 PM _850_900_1800_1900^W_1_2_5_8^L_1_3_5_7_8_20_28_38_40
7/6/2018 6:51:24 PM chip version : none
7/6/2018 6:51:24 PM MCP info : none
7/6/2018 6:51:24 PM EMMC version : Hynix 5.1 32GB
7/6/2018 6:51:24 PM secure : yes
7/6/2018 6:51:25 PM Bootloader type : commercial
7/6/2018 6:51:25 PM Download size : 00000511 mB
7/6/2018 6:51:26 PM Security version : 0004
7/6/2018 6:51:26 PM Challenge : 144fbb1459184818907513f46d96b265a45f37db
7/6/2018 6:51:26 PM FATAL ERROR: server error: No server found.
7/6/2018 6:51:26 PM Elapsed: 2 secs.
7/6/2018 6:51:40 PM PLEASE CONNECT POWERED OFF PHONE
7/6/2018 6:52:53 PM PHONE "PLEGAR1792804108" CONNECTED
7/6/2018 6:52:53 PM ProjectCode : PLE
7/6/2018 6:52:54 PM model : PAD
7/6/2018 6:52:54 PM sub_model : none
7/6/2018 6:52:54 PM software version : PLE-522C-0-00A0-B01
7/6/2018 6:52:54 PM SW model : 00A0
7/6/2018 6:52:54 PM build number : B01
7/6/2018 6:52:54 PM hardware version : 5.1
7/6/2018 6:52:54 PM RF band id : 
7/6/2018 6:52:54 PM _850_900_1800_1900^W_1_2_5_8^L_1_3_5_7_8_20_28_38_40
7/6/2018 6:52:54 PM chip version : none
7/6/2018 6:52:54 PM MCP info : none
7/6/2018 6:52:54 PM EMMC version : Hynix 5.1 32GB
7/6/2018 6:52:54 PM secure : yes
7/6/2018 6:52:54 PM Bootloader type : commercial
7/6/2018 6:52:54 PM Download size : 00000511 mB
7/6/2018 6:52:55 PM Security version : 0004
7/6/2018 6:52:55 PM Challenge : a42fa92c81f5b0affd80c563587db9d805dc43bb
7/6/2018 6:53:17 PM FATAL ERROR: server error: No server found.
7/6/2018 6:53:17 PM Elapsed: 23 secs.
7/6/2018 6:53:28 PM PLEASE CONNECT POWERED OFF PHONE
7/6/2018 7:09:29 PM PHONE "PLEGAR1792804108" CONNECTED
7/6/2018 7:09:29 PM ProjectCode : PLE
7/6/2018 7:09:29 PM model : PAD
7/6/2018 7:09:30 PM sub_model : none
7/6/2018 7:09:30 PM software version : PLE-522C-0-00A0-B01
7/6/2018 7:09:30 PM SW model : 00A0
7/6/2018 7:09:30 PM build number : B01
7/6/2018 7:09:30 PM hardware version : 5.1
7/6/2018 7:09:30 PM RF band id : 
7/6/2018 7:09:30 PM _850_900_1800_1900^W_1_2_5_8^L_1_3_5_7_8_20_28_38_40
7/6/2018 7:09:30 PM chip version : none
7/6/2018 7:09:30 PM MCP info : none
7/6/2018 7:09:30 PM EMMC version : Hynix 5.1 32GB
7/6/2018 7:09:30 PM secure : yes
7/6/2018 7:09:30 PM Bootloader type : commercial
7/6/2018 7:09:30 PM Download size : 00000511 mB
7/6/2018 7:09:31 PM Security version : 0004
7/6/2018 7:09:31 PM Challenge : 08be2be5ab2a70457a6d043172a85f3fea242229
7/6/2018 7:09:32 PM Waiting for calculation process ...
7/6/2018 7:09:32 PM RESPONSE: "SUCCESS" [256]
7/6/2018 7:09:33 PM BOOTLOADER AUTH PASSED
7/6/2018 7:09:33 PM Flash "D1C-0-5600-emmc_appsboot_service.zip" to "aboot"
7/6/2018 7:09:34 PM PHONE "PLEGAR1792804108" REMOVED
7/6/2018 7:09:36 PM PHONE "PLEGAR1792804108" CONNECTED
7/6/2018 7:09:36 PM Security version : 0004
7/6/2018 7:09:37 PM ProjectCode : PLE
7/6/2018 7:09:37 PM UID : 8bc393f9f917dabb60730f3ec1ac407c69ccafe4
7/6/2018 7:09:37 PM Waiting for calculation process ...
7/6/2018 7:09:37 PM RESPONSE: "SUCCESS" [256]
7/6/2018 7:09:37 PM SERVICE AUTH PASSED
7/6/2018 7:09:37 PM Flash "D1C-0-5600-ftm.img" to "ftmboot"
7/6/2018 7:09:39 PM Flash "D1C-0-5600-emmc_appsboot.mbn" to "aboot"
7/6/2018 7:09:39 PM FRP partition erased
7/6/2018 7:09:39 PM Elapsed: 9 secs.

the_laser · 07-06-2018, 17:19

FRP lock is NOT user code/pattern/etc

to remove usercode/pattern you need to reflash phone.

masimobilecare · 07-06-2018, 17:39

Quote:

Originally Posted by the_laser

FRP lock is NOT user code/pattern/etc

to remove usercode/pattern you need to reflash phone.

Thanks dear laser am new to this will do it tomorrow & let you

Sent from my iPhone using Tapatalk

masimobilecare · 07-07-2018, 19:16

At last nokia 6 flashing done 🤦🏼*♂️
My question is to Ntool team
As you have mentioned that need to flash to remove frp then why the frp option is in Ntool

Sent from my iPhone using Tapatalk

the_laser · 07-07-2018, 23:37

take your time and learn what is FRP

07-05-2018, 13:26	#1 (permalink)
masimobilecare Freak Poster Join Date: Feb 2016 Location: karnataka, mysore Posts: 379 Member: 2528503 Status: Offline Sonork: 1670792 Thanks Meter: 70	Nokia 6 frp tool not detecting need help badly hello team i have activated Ntool with 20 credits am trying to perform frp operation tool is not detecting need help please All drivers installed Am trying to connect device in off mode But Ntool is not detected .!!! Is that am doing wrong need help badly Last edited by masimobilecare; 07-05-2018 at 13:34.

07-05-2018, 14:24	#2 (permalink)
the_laser No Life Poster Join Date: Feb 2002 Location: Russia Age: 44 Posts: 2,681 Member: 9519 Status: Offline Thanks Meter: 2,151	http://forum.gsmhosting.com/vbb/f105.../#post13174070

07-06-2018, 17:19	#4 (permalink)
the_laser No Life Poster Join Date: Feb 2002 Location: Russia Age: 44 Posts: 2,681 Member: 9519 Status: Offline Thanks Meter: 2,151	FRP lock is NOT user code/pattern/etc to remove usercode/pattern you need to reflash phone.

07-07-2018, 19:16	#6 (permalink)
masimobilecare Freak Poster Join Date: Feb 2016 Location: karnataka, mysore Posts: 379 Member: 2528503 Status: Offline Sonork: 1670792 Thanks Meter: 70	At last nokia 6 flashing done 🤦🏼*♂️ My question is to Ntool team As you have mentioned that need to flash to remove frp then why the frp option is in Ntool Sent from my iPhone using Tapatalk

07-07-2018, 23:37	#7 (permalink)
the_laser No Life Poster Join Date: Feb 2002 Location: Russia Age: 44 Posts: 2,681 Member: 9519 Status: Offline Thanks Meter: 2,151	take your time and learn what is FRP