Pad finder is worst box in gsm market

[lovingazmee]

pPAD FINDER IS WORST BOX IN GSM MARKET
NO UPDATE NOTHING CANT FIND PINOUTS DONT SAY ME TO READ MANUAL I KNOW WELL THANX
ALWAYS GIVES ERROR FINDING DIFFRENT PIONOUTS CANT FIND PINOUTS MOR THAN 2 SETS IN 100 TAKE A LOOK ON LOGS

Ready...
Rx pin: 1
Tx pin: 2
Power: OFF (not connected to phone)
Ready...
Detecting pinout: please push and HOLD power button!
(Push box button to Abort)
Processing, please wait...OK
Rx - 5 Tx - 1
Switching to UniBox Mode...OK
Ready...
Switching to Command Mode...
PadFinder not detected!
Please check box connection
Switching to Command Mode...OK
Rx pin: 5
Tx pin: 1
Power: OFF (not connected to phone)
Ready...
Detecting pinout: please push and HOLD power button!
(Push box button to Abort)
Processing, please wait...OK
Rx - 2 Tx - 3
Switching to UniBox Mode...OK
Ready...
Switching to Command Mode...OK
Rx pin: 2
Tx pin: 3
Power: OFF (not connected to phone)
Ready...
Detecting pinout: please push and HOLD power button!
(Push box button to Abort)
Processing, please wait...OK
Rx - 1 Tx - 2
Detecting pinout: please push and HOLD power button!
(Push box button to Abort)
Processing, please wait...OK
Rx - 3 Tx - 2
Detecting pinout: please push and HOLD power button!
(Push box button to Abort)
Processing, please wait...OK
Rx - 1 Tx - 5
Detecting pinout: please push and HOLD power button!
(Push box button to Abort)
Processing, please wait...OK
Rx - 8 Tx - 1
Detecting pinout: please push and HOLD power button!
(Push box button to Abort)
Processing, please wait...OK
Rx - 1 Tx - 2
Detecting pinout: please push and HOLD power button!
(Push box button to Abort)
Processing, please wait...OK
Rx - 1 Tx - 2
Detecting pinout: please push and HOLD power button!
(Push box button to Abort)
Processing, please wait...OK
Rx - 1 Tx - 2
Detecting pinout: please push and HOLD power button!
(Push box button to Abort)
Processing, please wait...OK
Rx - 1 Tx - 2
Detecting pinout: please push and HOLD power button!
(Push box button to Abort)
Processing, please wait...OK
Rx - 1 Tx - 2
Detecting pinout: please push and HOLD power button!
(Push box button to Abort)
Processing, please wait...OK
Rx - 1 Tx - 2
Detecting pinout: please push and HOLD power button!
(Push box button to Abort)
Processing, please wait...OK
Rx - 5 Tx - 8
Detecting pinout: please push and HOLD power button!
(Push box button to Abort)
Processing, please wait...OK
Rx - 2 Tx - 10
Switching to UniBox Mode...OK
Ready...

ALWAYS SHOWING DIFFRENT PINOUTS
PHONE IS MTK CHIPSET DONT SAY ME TO CHECK CPU SUPPORTED OR NOT
PHONE IS IN ON CONDITION NOT DEAD CONNECTOR IS 100% FINE DONT SAY TO CHECK IT
NOW CAN U TELL ME WHAT IS THE USE OF THIS BOX ITS LIKE A GARBAGE NO USE BETTER TO BUY ANOTHER BOX WHICH MAY SUPPORT NOT ALL BUT ATLEAST 60 CHINA MOBILE IN 100 I WILL NOT PREFER ANY1 TO BUY THIS BOX DONT DELETE MY POST I HAVE SCREEN SHOT AND I WILL POST IN MARKET FEED BACK ALSO
WBR
AZEEM

[sahil2000ind]

YA BRO SEEMS THAT PRODUCT SUPPORTER MUST CHANGE THIER *******R SUPPORT STADAGY



WBR
sahil2000ind

[GSMtricks]

Originally Posted by sahil2000ind

YA BRO SEEMS THAT PRODUCT SUPPORTER MUST CHANGE THIER *******R SUPPORT STADAGY



WBR
sahil2000ind

We not change it. Just when post start with bull **** words - sure we will not answer him. Make correct topic - get correct answer. Easy.

[lovingazmee]

Originally Posted by gsmtricks

we not change it. Just when post start with bull **** words - sure we will not answer him. Make correct topic - get correct answer. Easy.

what topic u need i think u only need topic sucess not want to answer to solve problem check in my posting where i have written bull**** proove that its a bull**** then i will not post in ur section
wbr
azeem

[GSMtricks]

Originally Posted by lovingazmee

what topic u need i think u only need topic sucess not want to answer to solve problem check in my posting where i have written bull**** proove that its a bull**** then i will not post in ur section
wbr
azeem

I am not talking about suceess posts. I am asking about respect. Your topics starts with attacking first than you write log. And again attackng only - sure will be deleted.

[lovingazmee]

Originally Posted by gsmtricks

i am not talking about suceess posts. I am asking about respect. Your topics starts with attacking first than you write log. And again attackng only - sure will be deleted.

so what u expect from me sir if box is not working and i am not atacking i am just trying to tell u that box is not good i dont like its working as it cant fine pinouts even normal phone and other side spider is working fine and finding pinouts in 10 sec so now can u tell me about this dont tell me to read manual or cable fault etc i have checked all nothing is wrong
wbr
azeem

[balanel]

same story, i have the box from 5 months and always
Processing, please wait...Failed!
THE CABLES ARE GOOD, I'VE VERIFIED THEM
i've talked with reseller and tod me that it takes 2 months to replace box, i thing he is going on foot to swap it
this is the first box with i have problems

[i-care]

since the launch of this box i've been using this box, but there is no problem with my box i found, it is working very very good.
even i have repaired phones with it which was not working with spider man or other boxes.

br,
i-care.

[balanel]

maybe i had bad luck, i hope after replace will work well, i think it has a hw problem since i've bought it

[ABDULMANAN]

multi team is dead team littlupdate in one year it s nothing

[gsmdok]

about padfinder: MB team leave MB and MB lite to born PADFINDER ....

now all MB team products are alone , NO supporters , only ordering when ask something you are like criminal

---- i say that padfinder work 90% well but support is absent that's why some people say that's not work -----

today i can't log to support because i must renew support activation , BUT for WHAT support , it's VERY VERY SLOWWW ,

please MB team you must make solution , UPDATES, paid or not , WE NEED UPDATES .........


thanks

[gsmdok]

You must support your customers , or there are no customers no MB , .........

[.::koolfriend4u::.]

Originally Posted by balanel

maybe i had bad luck, i hope after replace will work well, i think it has a hw problem since i've bought it

its a longtime problem here in this section! the product supporters wont even consider our problem here.if u asked,more critical problm..then v r helpless!!!(weras hardware manufacturer for this box,is giving very good support)

i didnt mean for any new updates! what v can xpect more than pin detecting from padfinder box.


i sold many boxes(nearly fifty) to my custmers here..
in recent times,im facing problm wth many boxes !!!!
padfiner is detecting in right port..but cant able to detect tx/rx(even for working phones) .but the main cable is good!
shure their is hardware problm in it!(my reseller told the problm is due to trnsistor inside..he solved it for few boxes..by claim)

team has to solve it,so tht they can be in the market..

at this point,i have to say BIG THANKS to rajesh and my reseller..
who solved the problm in few boxes,but still many box to send for service,for the same reason

i am xpecting the multi-box team,to solve this problem..

good luck

[lovingazmee]

Originally Posted by .::koolfriend4u::.

its a longtime problem here in this section! the product supporters wont even consider our problem here.if u asked,more critical problm..then v r helpless!!!(weras hardware manufacturer for this box,is giving very good support)

i didnt mean for any new updates! what v can xpect more than pin detecting from padfinder box.


i sold many boxes(nearly fifty) to my custmers here..
in recent times,im facing problm wth many boxes !!!!
padfiner is detecting in right port..but cant able to detect tx/rx(even for working phones) .but the main cable is good!
shure their is hardware problm in it!(my reseller told the problm is due to trnsistor inside..he solved it for few boxes..by claim)

team has to solve it,so tht they can be in the market..

at this point,i have to say BIG THANKS to rajesh and my reseller..
who solved the problm in few boxes,but still many box to send for service,for the same reason

i am xpecting the multi-box team,to solve this problem..

good luck

n NOW MY POST CLOSED HE CANT SOLVE PROBLEM HE THINKS THAT WE R PALYING WITH HIM IF WE R GIVING ANY PROBLEM TO HIM HE CANT SOLVE ANY PROBLEM I THINK NOW ITS TIME TO KICK THIS WORST BOX OUT GSM TRICKS ONLY WANT TO SELL HIS BOX WITHOUT PROPER SUPPORT EVERY TIME HIS BOX IS NOT FAULTI WE R FAULTY AS WE R COMLAINING ABOUT HIS BOX HE DELETED MY POST ABOUT ASKING THIS ITS A REQUEST TO ADMIN PLS TAKE ACTION AGAINT THIS BAD TEAM ALWAYS DELETE POST DONT WANT TO SUPPORT ANYWAY
WBR
AZEEM

[lovingazmee]

Originally Posted by .::koolfriend4u::.

its a longtime problem here in this section! the product supporters wont even consider our problem here.if u asked,more critical problm..then v r helpless!!!(weras hardware manufacturer for this box,is giving very good support)

i didnt mean for any new updates! what v can xpect more than pin detecting from padfinder box.


i sold many boxes(nearly fifty) to my custmers here..
in recent times,im facing problm wth many boxes !!!!
padfiner is detecting in right port..but cant able to detect tx/rx(even for working phones) .but the main cable is good!
shure their is hardware problm in it!(my reseller told the problm is due to trnsistor inside..he solved it for few boxes..by claim)

team has to solve it,so tht they can be in the market..

at this point,i have to say BIG THANKS to rajesh and my reseller..
who solved the problm in few boxes,but still many box to send for service,for the same reason

i am xpecting the multi-box team,to solve this problem..

good luck

n NOW MY POST CLOSED HE CANT SOLVE PROBLEM HE THINKS THAT WE R PALYING WITH HIM IF WE R GIVING ANY PROBLEM TO HIM HE CANT SOLVE ANY PROBLEM I THINK NOW ITS TIME TO KICK THIS WORST BOX OUT GSM TRICKS ONLY WANT TO SELL HIS BOX WITHOUT PROPER SUPPORT EVERY TIME HIS BOX IS NOT FAULTI WE R FAULTY AS WE R COMLAINING ABOUT HIS BOX HE DELETED MY POST ABOUT ASKING THIS ITS A REQUEST TO ADMIN PLS TAKE ACTION AGAINT THIS BAD TEAM ALWAYS DELETE POST DONT WANT TO SUPPORT ANYWAY
WBR
AZEEM