BE4 repair, reboot and auto power off? - GSM-Forum

reo · 04-14-2002, 16:27

Hi

I hope someone in this forum has come across a problem on the BE4
the phone reboots, auto power off, sometimes switches on, sometimes switches on but with no display or lights.

Has anyone come across such a fault and has some sought of a soltuion plz help me out.

it is version 138 amd 2mb.

hope someone can help

regards
reo

rayback · 04-14-2002, 21:20

Use Alcatel ToolBox 1.017 by EMSI,

It is not free.

jonwillow · 04-15-2002, 17:29

I have this problem too.
I tryed Flash Be4 Amd2Mb 136 phone with other 15flashes (some sw) but, no result :-(
Phone is crayzy.
May be i can repair first flash area with hex editor ?, how do this correctly?

Pandemonio100 · 04-15-2002, 19:12

Sorry for you but this is an HARD problem. try to rehot the ic power bga.

jonwillow · 04-15-2002, 21:50

how i can read/write dump from flash ?
To: Pandemonio100 This is not hardware problem
Problem in first bytes in flash

reo · 04-15-2002, 23:30

hi

now that we no it is in the first bytes of the flash how can we repair it ?
does anyone no ?

or is an upgrade the only way to repair this.

regards
reo

Pandemonio100 · 04-15-2002, 23:56

One of my friend work in ALCATEL SERVICE CENTER and he have told me that this is an hard problem and he have resolved many many many 3xx resolding the ic power.

gsmzonesk · 04-16-2002, 02:38

I have software for repair all software problems (work withou dongle) I exchange it for Pemaster 2.04 (also without dongle) for unlock and flash motorola phones with RoEMMI

Peter
[email protected]

rayback · 04-16-2002, 13:57

Resold only or replace it ?
where to find this component ?

Pandemonio100 · 04-16-2002, 15:46

I don't have board in this moment to look the name of component but i remember that is type GCAPII in motorola phones, resold it if you have infrared solder machine, if not desolder the ic reball it and resold on the board.
For GSMZONESK please give the name of your fantastic program or put here the screeshot.

rayback · 04-17-2002, 00:38

OK Pandemonio,

www.insidegsm.com or www.inside-gsm.com

there is name of components ...

gsmzonesk · 04-17-2002, 01:31

Pandemio: Alcatel ToolBox by EMSI v. 1.017 Full can reapir all software errors (after wrong unlock, or bad flashing) works 101%

MadMan
GSMZone Slovakia

Pandemonio100 · 04-17-2002, 02:10

ho sure that can repair all software error but i think the problem is ic 10 on figure www.inside-gsm.com

P.s. : only for statistic i have sent in Alcatel service center one phone 303 whit same problem of REO, it had the guarantee and i don't have open it. When the phone is returned repaired, i have open it and I have tried to see if had been made soldering.
Under one IC Bga there was a lot of flux....number 10 on figure.
is it a case only?

***acyl2000*** · 04-17-2002, 11:33

the ic is PTWL2212

Pandemonio100 · 04-17-2002, 15:52

Yessssss.

04-14-2002, 16:27	#1 (permalink)
reo No Life Poster Join Date: Apr 2001 Posts: 786 Member: 4270 Status: Offline Thanks Meter: 13	BE4 repair, reboot and auto power off? Hi I hope someone in this forum has come across a problem on the BE4 the phone reboots, auto power off, sometimes switches on, sometimes switches on but with no display or lights. Has anyone come across such a fault and has some sought of a soltuion plz help me out. it is version 138 amd 2mb. hope someone can help regards reo

04-14-2002, 21:20	#2 (permalink)
rayback Freak Poster Join Date: May 2001 Location: Indian Ocean Age: 54 Posts: 306 Member: 4765 Status: Offline Thanks Meter: 0	Alcatel Tool Box 1.017 by Emsi Use Alcatel ToolBox 1.017 by EMSI, It is not free.

04-15-2002, 23:30	#6 (permalink)
reo No Life Poster Join Date: Apr 2001 Posts: 786 Member: 4270 Status: Offline Thanks Meter: 13	hi now that we no it is in the first bytes of the flash how can we repair it ? does anyone no ? or is an upgrade the only way to repair this. regards reo Last edited by reo; 04-15-2002 at 23:56.

04-16-2002, 13:57	#9 (permalink)
rayback Freak Poster Join Date: May 2001 Location: Indian Ocean Age: 54 Posts: 306 Member: 4765 Status: Offline Thanks Meter: 0	resold only or replace it Resold only or replace it ? where to find this component ?

04-17-2002, 00:38	#11 (permalink)
rayback Freak Poster Join Date: May 2001 Location: Indian Ocean Age: 54 Posts: 306 Member: 4765 Status: Offline Thanks Meter: 0	.... site ... OK Pandemonio, www.insidegsm.com or www.inside-gsm.com there is name of components ...

04-15-2002, 17:29	#3 (permalink)
jonwillow No Life Poster Join Date: Sep 1999 Location: Europe Age: 43 Posts: 905 Member: 461 Status: Offline Thanks Meter: 2	I have this problem too. I tryed Flash Be4 Amd2Mb 136 phone with other 15flashes (some sw) but, no result :-( Phone is crayzy. May be i can repair first flash area with hex editor ?, how do this correctly?

04-15-2002, 19:12	#4 (permalink)
Pandemonio100 No Life Poster Join Date: Feb 2001 Location: ITALY Age: 51 Posts: 3,969 Member: 3381 Status: Offline Thanks Meter: 1,171	Sorry for you but this is an HARD problem. try to rehot the ic power bga.

04-15-2002, 21:50	#5 (permalink)
jonwillow No Life Poster Join Date: Sep 1999 Location: Europe Age: 43 Posts: 905 Member: 461 Status: Offline Thanks Meter: 2	how i can read/write dump from flash ? To: Pandemonio100 This is not hardware problem Problem in first bytes in flash

04-15-2002, 23:56	#7 (permalink)
Pandemonio100 No Life Poster Join Date: Feb 2001 Location: ITALY Age: 51 Posts: 3,969 Member: 3381 Status: Offline Thanks Meter: 1,171	One of my friend work in ALCATEL SERVICE CENTER and he have told me that this is an hard problem and he have resolved many many many 3xx resolding the ic power.

04-16-2002, 02:38	#8 (permalink)
gsmzonesk Banned Join Date: Jan 2002 Location: Slovakia Posts: 5 Member: 8953 Status: Offline Thanks Meter: 0	I have software for repair all software problems (work withou dongle) I exchange it for Pemaster 2.04 (also without dongle) for unlock and flash motorola phones with RoEMMI Peter [email protected]

04-16-2002, 15:46	#10 (permalink)
Pandemonio100 No Life Poster Join Date: Feb 2001 Location: ITALY Age: 51 Posts: 3,969 Member: 3381 Status: Offline Thanks Meter: 1,171	I don't have board in this moment to look the name of component but i remember that is type GCAPII in motorola phones, resold it if you have infrared solder machine, if not desolder the ic reball it and resold on the board. For GSMZONESK please give the name of your fantastic program or put here the screeshot.

04-17-2002, 01:31	#12 (permalink)
gsmzonesk Banned Join Date: Jan 2002 Location: Slovakia Posts: 5 Member: 8953 Status: Offline Thanks Meter: 0	Pandemio: Alcatel ToolBox by EMSI v. 1.017 Full can reapir all software errors (after wrong unlock, or bad flashing) works 101% MadMan GSMZone Slovakia

04-17-2002, 02:10	#13 (permalink)
Pandemonio100 No Life Poster Join Date: Feb 2001 Location: ITALY Age: 51 Posts: 3,969 Member: 3381 Status: Offline Thanks Meter: 1,171	ho sure that can repair all software error but i think the problem is ic 10 on figure www.inside-gsm.com P.s. : only for statistic i have sent in Alcatel service center one phone 303 whit same problem of REO, it had the guarantee and i don't have open it. When the phone is returned repaired, i have open it and I have tried to see if had been made soldering. Under one IC Bga there was a lot of flux....number 10 on figure. is it a case only?

04-17-2002, 11:33	#14 (permalink)
*acyl2000* Super Moderator Join Date: Aug 2000 Location: Malaysia Posts: 2,809 Member: 1922 Status: Offline Sonork: 100.64645 Thanks Meter: 692	the ic is PTWL2212

04-17-2002, 15:52	#15 (permalink)
Pandemonio100 No Life Poster Join Date: Feb 2001 Location: ITALY Age: 51 Posts: 3,969 Member: 3381 Status: Offline Thanks Meter: 1,171	Yessssss.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
help m620 hang and auto power off!!!	sirnavid2010	HWK	6	07-27-2009 10:24
Philips Xenium 9@9Q Auto power off How to repair?	Dj King	Infinity-Box	6	03-25-2009 10:43
T28 world auto power off and restart	florinmar	Old Ericsson Phones & Sony Phones	2	09-10-2003 09:05
6310 auto powered-off and now is death!	VendorGSM	Nokia Digital Core Technology 4 ( DCT-4 )	3	08-30-2002 21:51
T 28 world auto power off and retart	florinmar	Old Ericsson Phones & Sony Phones	0	06-12-2002 05:29