2100 DCT 3 or DCT 4? is it possible to calc. IMEI on this model - GSM-Forum

Falck · 06-19-2003, 15:42

Hi
Is it possible to calc. unlock codes by IMEI on Nokia 2100?

WBR

Fre3 Crack3r · 06-19-2003, 15:48

Hello @LL

2100 it DCT3 try to unlock it by cable M-BUS and Nokia Tools By jordik .

Falck · 06-19-2003, 16:03

OK does it fit cable with other DCT3 phones, 3310,3410

WBR Falck

themobileking · 06-19-2003, 16:07

yes...use the same 8210 cable that you use for 8210...it is the same

rgds

Hams · 06-21-2003, 16:36

Quote:

Originally posted by themobileking
yes...use the same 8210 cable that you use for 8210...it is the same

rgds

U sure use "the same 8210 cable that use for 8210" or ?????

Just Joking my friend

Hams

TheEckoMan · 06-22-2003, 12:59

Hey
No free software can change IMEI on these phones. They are DCT3, but the IMEI area is complicated seems to have a DCT4 resemblence to it (change UEM)
Even when u flash a full flash from different 2100 or upload a new EEPROM, the IMEI stays the same, never changes.

Syed · 06-22-2003, 17:44

Quote:

Originally posted by TheEckoMan
Hey
No free software can change IMEI on these phones. They are DCT3, but the IMEI area is complicated seems to have a DCT4 resemblence to it (change UEM)
Even when u flash a full flash from different 2100 or upload a new EEPROM, the IMEI stays the same, never changes.

never had any problem with nokia 2100 flashing or IMEI change.... just use normal nokia tool like nokia tool by jordik.... 100% okay

tomeo · 06-23-2003, 16:45

To Change IMEI on Nokia 2100 :
After Full Flash the Phone (u get contact service) don't power on the phone. change cable to Mbus cable run Nokia Tool, power on the phone soon read phone and click change IMEI. and Phone IMEI back to Original.
Tested by Me

nonu_don · 07-03-2003, 09:18

this also works for me,,, But powering on phone after flashing is not a problem.

Naman

06-19-2003, 15:42	#1 (permalink)
Falck No Life Poster Join Date: Dec 2002 Location: Denmark Age: 55 Posts: 1,059 Member: 18805 Status: Offline Thanks Meter: 27	2100 DCT 3 or DCT 4? is it possible to calc. IMEI on this model Hi Is it possible to calc. unlock codes by IMEI on Nokia 2100? WBR

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Is it possible to change imei on ks20 or not ?	gsmnice	FuriousGold	5	10-21-2012 16:52
Is it possible to change imei on this phone?	cracksnack	Seking Server	1	04-23-2008 21:04
Is it possible to change imei on sagem MYX5m, MYX3, X6...	gsmnice	ARM9 BASED M62 / M62+	4	09-18-2003 12:50
Is it possible to Change IMEI on T300	gazt	Sony Ericsson	7	06-06-2003 03:34
Is it possible to change imei on sony mobile as j70, z5...	gsmnice	Sony	7	04-16-2002 20:47

06-19-2003, 15:48	#2 (permalink)
Fre3 Crack3r Banned Join Date: Jan 2002 Location: Morocco , Tetouan Posts: 1,752 Member: 8784 Status: Offline Sonork: 100.63512 Thanks Meter: 31	Hello @LL 2100 it DCT3 try to unlock it by cable M-BUS and Nokia Tools By jordik .

06-19-2003, 16:03	#3 (permalink)
Falck No Life Poster Join Date: Dec 2002 Location: Denmark Age: 55 Posts: 1,059 Member: 18805 Status: Offline Thanks Meter: 27	OK does it fit cable with other DCT3 phones, 3310,3410 WBR Falck

06-19-2003, 16:07	#4 (permalink)
themobileking No Life Poster Join Date: Jun 2001 Location: Uranus Age: 53 Posts: 731 Member: 5072 Status: Offline Thanks Meter: 91	yes...use the same 8210 cable that you use for 8210...it is the same rgds

06-22-2003, 12:59	#6 (permalink)
TheEckoMan No Life Poster Join Date: Mar 2001 Location: Australia, Melbourne Age: 37 Posts: 548 Member: 3902 Status: Offline Thanks Meter: 19	Hey No free software can change IMEI on these phones. They are DCT3, but the IMEI area is complicated seems to have a DCT4 resemblence to it (change UEM) Even when u flash a full flash from different 2100 or upload a new EEPROM, the IMEI stays the same, never changes.

06-23-2003, 16:45	#8 (permalink)
tomeo Insane Poster Join Date: Jan 2002 Location: indonesia Posts: 75 Member: 8845 Status: Offline Thanks Meter: 2	To Change IMEI on Nokia 2100 : After Full Flash the Phone (u get contact service) don't power on the phone. change cable to Mbus cable run Nokia Tool, power on the phone soon read phone and click change IMEI. and Phone IMEI back to Original. Tested by Me

07-03-2003, 09:18	#9 (permalink)
nonu_don No Life Poster Join Date: Feb 2003 Location: ..::India::.. Age: 40 Posts: 3,809 Member: 22538 Status: Offline Sonork: 100.67180 Thanks Meter: 2,252	this also works for me,,, But powering on phone after flashing is not a problem. Naman