Griffin, 7650 & 3650 - GSM-Forum

daytona · 05-25-2003, 21:22

Now, would some experienced fellow here enlighten me on why everytime I wanna flash a 7650 or a 3650, it will go "...initialising..........error (FFFF9100)?? Look, there is no cable problem, cause the cable was used by a friend on his Griffin and it works, and there isn't any dirty pcb contacts either. Everything is connected correctly, the Griffin can connect to the phone and read details such as IMEI, product code, flash id, blah blah, but just cannot flash!! This is despite upgrading the box, registering the box, using all types of Flash Updates, from 2.10 to 2.14, making sure voltage is 9v, installing it correctly (used the new Griffin Gold New Installer), and using whatever else that is recommended.

Any ideas?????????????????????

WBR

K-Dix · 05-26-2003, 06:52

Are you using ps with less 500ma? I came across with the same problem when I failed to comply with the suggested minimum 500 ma...

Alinus · 05-26-2003, 07:57

9v and 1000 mAh is better...

rico1 · 05-26-2003, 16:47

Hello Friends!
I have the same problem.
Nokia 3650 (v2.50) cannot flash!
Error message [22222222] or [FFFF9300].
Flash update 02_14, griffin 2.40.
power supply 9V 500mAh
Other any ideas??
Best Regards

MicrostarGSM® · 05-26-2003, 17:20

have you install by using installer from griffin team???
griffingold installer!!!!

maybe this will help you for better flashing

Alinus · 05-26-2003, 21:02

u need more than 500 mAh!!!!!

rico1 · 05-26-2003, 21:35

Hi!
Safe?
I am tested 1,1A
Not working!

MicrostarGSM® · 05-26-2003, 22:20

did you install griffingold installer?????

if not get it here
Download the full install version 1.986

i have face this problem b4 and after i run the griffingold setup it work's perfectly..100% working without problem.

if still same check your phone connector...

rico1 · 05-26-2003, 22:29

thx!
How to download?
please password?
thx!
please send me private Griffingold.
Click here to email me

rico1 · 05-26-2003, 22:43

Griffingold=Griffin1986 ??
If yes ?Not supported 3650 flash.
best regards!
Thnx all!!

MicrostarGSM® · 05-26-2003, 23:35

you need to register your self at griffin forum to get the login and pass..register and to get the login is free..

http://www.griffinbox.com

are your box have been activated already???
if avtivated you ust have the serial number at your sw for the griffinbox serial no...

you need this serial number to register at the griffin forum and to get the login pass for the too and also you can get fully support from griffin team..

rico1 · 05-27-2003, 07:19

Hello Microstar!
Yes activated box!
i am registered griffin forum.
Thanx All!!!!
:-))

rico1 · 05-27-2003, 07:37

Hi all!
Yet ever the same problem!!! :-((((
Cable it works.
I am what do you do???
:-(((

daytona · 05-27-2003, 11:14

Amazing!!! Not a single postings has an answer, and if you read my thread carefully, you'll notice that everything suggested is mentioned, except for the minimum 500mAh thingy. I'm using 9v 1,000mAh. NOTHING works. It can flash every model, except 3650 & 7650.

If you ask me, it's a Griffin Box disease, unless someone can prove me wrong. By the way, 7650 killed by Griffin CANNOT be repaired by Griffin (blank LCD). I used another 2 devices to fix the problem!!! No amount of Resetting will ever get you anywhere.

WBR

EndlessConnections · 05-28-2003, 08:56

Quote:

Originally posted by daytona
Amazing!!! Not a single postings has an answer, and if you read my thread carefully, you'll notice that everything suggested is mentioned, except for the minimum 500mAh thingy. I'm using 9v 1,000mAh. NOTHING works. It can flash every model, except 3650 & 7650.

If you ask me, it's a Griffin Box disease, unless someone can prove me wrong. By the way, 7650 killed by Griffin CANNOT be repaired by Griffin (blank LCD). I used another 2 devices to fix the problem!!! No amount of Resetting will ever get you anywhere.

WBR

Probably something wrong with your hardware ,i have flashed over 100 3650 and 7650 with griffin orignal and never had single problem .

05-25-2003, 21:22	#1 (permalink)
daytona Freak Poster Join Date: Jul 2001 Location: Malaysia Posts: 252 Member: 5381 Status: Offline Thanks Meter: 0	Griffin, 7650 & 3650 Now, would some experienced fellow here enlighten me on why everytime I wanna flash a 7650 or a 3650, it will go "...initialising..........error (FFFF9100)?? Look, there is no cable problem, cause the cable was used by a friend on his Griffin and it works, and there isn't any dirty pcb contacts either. Everything is connected correctly, the Griffin can connect to the phone and read details such as IMEI, product code, flash id, blah blah, but just cannot flash!! This is despite upgrading the box, registering the box, using all types of Flash Updates, from 2.10 to 2.14, making sure voltage is 9v, installing it correctly (used the new Griffin Gold New Installer), and using whatever else that is recommended. Any ideas????????????????????? WBR

05-26-2003, 06:52	#2 (permalink)
K-Dix No Life Poster Join Date: Mar 2001 Location: ..still in idle mode... Posts: 989 Member: 3900 Status: Offline Thanks Meter: 31	Are you using ps with less 500ma? I came across with the same problem when I failed to comply with the suggested minimum 500 ma... Last edited by K-Dix; 05-26-2003 at 08:29.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
tired with 7650 & griffin , need help	Bomber	Nokia Digital Core Technology 4 ( DCT-4 )	1	03-26-2005 10:33
7650 & 3650 camera	SRNOURI	WD2 & APE (Symbian Phones)	1	01-02-2004 11:43
arabic lang for 7650 & 3650	adawi74	Nokia Digital Core Technology 4 ( DCT-4 )	12	10-22-2003 02:38
arabic lang for 7650 & 3650	adawi74	Nokia Digital Core Technology 4 ( DCT-4 )	2	04-19-2003 17:53
Griffin Box & 7650 Unlocking	fonetech	Nokia Digital Core Technology 4 ( DCT-4 )	1	01-18-2003 08:09

05-26-2003, 07:57	#3 (permalink)
Alinus No Life Poster Join Date: Aug 2002 Location: Romania, The Bla Bla Country Age: 44 Posts: 1,991 Member: 14279 Status: Offline Thanks Meter: 35	9v and 1000 mAh is better...

05-26-2003, 16:47	#4 (permalink)
rico1 No Life Poster Join Date: Jul 2001 Location: handline Age: 48 Posts: 788 Member: 5397 Status: Offline Thanks Meter: 38	Hello Friends! I have the same problem. Nokia 3650 (v2.50) cannot flash! Error message [22222222] or [FFFF9300]. Flash update 02_14, griffin 2.40. power supply 9V 500mAh Other any ideas?? Best Regards

05-26-2003, 17:20	#5 (permalink)
MicrostarGSM® No Life Poster Join Date: Dec 2002 Age: 47 Posts: 4,775 Member: 18855 Status: Offline Thanks Meter: 1,939	have you install by using installer from griffin team??? griffingold installer!!!! maybe this will help you for better flashing

05-26-2003, 21:02	#6 (permalink)
Alinus No Life Poster Join Date: Aug 2002 Location: Romania, The Bla Bla Country Age: 44 Posts: 1,991 Member: 14279 Status: Offline Thanks Meter: 35	u need more than 500 mAh!!!!!

05-26-2003, 21:35	#7 (permalink)
rico1 No Life Poster Join Date: Jul 2001 Location: handline Age: 48 Posts: 788 Member: 5397 Status: Offline Thanks Meter: 38	Hi! Safe? I am tested 1,1A Not working!

05-26-2003, 22:20	#8 (permalink)
MicrostarGSM® No Life Poster Join Date: Dec 2002 Age: 47 Posts: 4,775 Member: 18855 Status: Offline Thanks Meter: 1,939	did you install griffingold installer????? if not get it here Download the full install version 1.986 i have face this problem b4 and after i run the griffingold setup it work's perfectly..100% working without problem. if still same check your phone connector...

05-26-2003, 22:29	#9 (permalink)
rico1 No Life Poster Join Date: Jul 2001 Location: handline Age: 48 Posts: 788 Member: 5397 Status: Offline Thanks Meter: 38	thx! How to download? please password? thx! please send me private Griffingold. Click here to email me

05-26-2003, 22:43	#10 (permalink)
rico1 No Life Poster Join Date: Jul 2001 Location: handline Age: 48 Posts: 788 Member: 5397 Status: Offline Thanks Meter: 38	Griffingold=Griffin1986 ?? If yes ?Not supported 3650 flash. best regards! Thnx all!!

05-26-2003, 23:35	#11 (permalink)
MicrostarGSM® No Life Poster Join Date: Dec 2002 Age: 47 Posts: 4,775 Member: 18855 Status: Offline Thanks Meter: 1,939	you need to register your self at griffin forum to get the login and pass..register and to get the login is free.. http://www.griffinbox.com are your box have been activated already??? if avtivated you ust have the serial number at your sw for the griffinbox serial no... you need this serial number to register at the griffin forum and to get the login pass for the too and also you can get fully support from griffin team..

05-27-2003, 07:19	#12 (permalink)
rico1 No Life Poster Join Date: Jul 2001 Location: handline Age: 48 Posts: 788 Member: 5397 Status: Offline Thanks Meter: 38	Hello Microstar! Yes activated box! i am registered griffin forum. Thanx All!!!! :-))

05-27-2003, 07:37	#13 (permalink)
rico1 No Life Poster Join Date: Jul 2001 Location: handline Age: 48 Posts: 788 Member: 5397 Status: Offline Thanks Meter: 38	Hi all! Yet ever the same problem!!! :-(((( Cable it works. I am what do you do??? :-(((

05-27-2003, 11:14	#14 (permalink)
daytona Freak Poster Join Date: Jul 2001 Location: Malaysia Posts: 252 Member: 5381 Status: Offline Thanks Meter: 0	Amazing!!! Not a single postings has an answer, and if you read my thread carefully, you'll notice that everything suggested is mentioned, except for the minimum 500mAh thingy. I'm using 9v 1,000mAh. NOTHING works. It can flash every model, except 3650 & 7650. If you ask me, it's a Griffin Box disease, unless someone can prove me wrong. By the way, 7650 killed by Griffin CANNOT be repaired by Griffin (blank LCD). I used another 2 devices to fix the problem!!! No amount of Resetting will ever get you anywhere. WBR