mw930 s2-d2 with mw30xx soft? - GSM-Forum

Me@n · 01-26-2002, 21:00

Can this be done?

I have allready tried mw3026 software to get phone ID from MW930 and calculate simlock code. But phone wont accept it, now I am thinking to enter field 251 to the phone by pony prog. Have anybody tried this and what is the result?

 regards Me@n

zuti62 · 01-26-2002, 21:02

Yes.Put new hex value to fiel 251 with poniprg. and phone work.I tested. Zuti

Me@n · 01-26-2002, 21:33

Zuti - thanks for your reply.

regards Me@n

Hvala na odgovoru majstore!

GSM Deals · 01-26-2002, 22:07

You can write hex values direcly to field 251 with sagem doctor no read modify and write eeprom regards

Me@n · 01-26-2002, 22:24

Are you sure ? Eeprom field 251 in MW930 is protected and you need pony to read it.

regards Me@n

mauro · 01-27-2002, 00:32

yes 930 D2 FF3,1T is protected. Sagem Dr. no write this field.

sorry my English.

MegaSlava · 02-01-2002, 22:33

Hi to all!

I have mw930 s2 d2. phone ID : 080A81C12141 field 0 : 083A23813235633723 feld 191 : 3B37397D

calculated unlock code : 09827697 new field 251 : 0x3A93E06D this code MUST be ok - some people calculate code from logs of this phone & code the same...

Phone says that code is incorrect. I check field 251 with ponyprog - 0x3A93E06D in eeprom. One man try unlock this phone befor, may be he change some data...((( what can i do in this situation? Thanx!

WBR, MegaSlava

MegaSlava · 02-03-2002, 15:14

Hi again:-)

I unlock this MW930! I calculate new code & field 251 with new value of field 251/191 - 0x3A93E06D and recieve new value for 251 - 0x3B37397D (it was my field 191). After this i change field 251 to 0x3B37397D by ponyprog and phone with code 09827697 is unlocked! I don't know why in this phone field 191 was 0x3B37397D and 251 was 0x3A93E06D! I hate sagem phones! <img src="biggrin.gif" border="0"> <img src="biggrin.gif" border="0"> <img src="biggrin.gif" border="0"> Thanx for help soft by Karlo and Cbot!

WBR, MegaSlava

Guest · 02-04-2002, 05:55

Hi MegaSlava

To what addresses in dump eeprom S2-D2 FF3,1T there are fields 191 and 251?

WBR,Guest

MegaSlava · 02-04-2002, 17:44

2 Guest.

Use sfe003 to find addresses of this fields.

WBR, MegaSlava

datalife2000 · 02-05-2002, 06:01

Hi! <img src="smile.gif" border="0">

Where can i get sfe003 and how do i read as well as change the fields? How do i know which values to put in those fields?

Guest · 02-05-2002, 11:35

2 MegaSlava: 10x. Your solution good works. 2 datalife2000: check mail.

GSM Deals · 02-06-2002, 01:23

[quote]Originally posted by Me@n: Are you sure ? Eeprom field 251 in MW930 is protected and you need pony to read it.

regards Me@n<hr></blockquote>

Ok guys excuse my ignorance just today i've a 922 ft4.1m from D2.impossible to read field 251 with sagem doctor after many tries the phone shows "serv unruf"message i'm not skilled in deutsh but i see the meaning is return to "CS" how can restore the phone at least to accept D2 card regatds

01-26-2002, 21:00	#1 (permalink)
Me@n Freak Poster Join Date: Dec 2000 Posts: 322 Member: 2797 Status: Offline Thanks Meter: 0	mw930 s2-d2 with mw30xx soft? Can this be done? I have allready tried mw3026 software to get phone ID from MW930 and calculate simlock code. But phone wont accept it, now I am thinking to enter field 251 to the phone by pony prog. Have anybody tried this and what is the result? <br />regards<br />Me@n

01-26-2002, 21:02	#2 (permalink)
zuti62 Freak Poster Join Date: Oct 2001 Location: Croatia Age: 61 Posts: 152 Member: 6807 Status: Offline Thanks Meter: 11	Yes.Put new hex value to fiel 251 with poniprg. and phone work.I tested.<br />Zuti

01-26-2002, 21:33	#3 (permalink)
Me@n Freak Poster Join Date: Dec 2000 Posts: 322 Member: 2797 Status: Offline Thanks Meter: 0	Zuti - thanks for your reply. regards<br />Me@n Hvala na odgovoru majstore!

01-26-2002, 22:07	#4 (permalink)
GSM Deals No Life Poster Join Date: Apr 2001 Location: AGADIR Morocco Posts: 1,626 Member: 3936 Status: Offline Thanks Meter: 237	You can write hex values direcly to field 251 with<br />sagem doctor no read modify and write eeprom<br />regards

01-26-2002, 22:24	#5 (permalink)
Me@n Freak Poster Join Date: Dec 2000 Posts: 322 Member: 2797 Status: Offline Thanks Meter: 0	Are you sure ?<br /> Eeprom field 251 in MW930 is protected and you need pony to read it. regards<br />Me@n

01-27-2002, 00:32	#6 (permalink)
mauro Junior Member Join Date: Mar 2001 Posts: 14 Member: 3556 Status: Offline Thanks Meter: 0	yes 930 D2 FF3,1T is protected. Sagem Dr. no write this field. sorry my English.

02-01-2002, 22:33	#7 (permalink)
MegaSlava Crazy Poster Join Date: Feb 2000 Location: Russia, Rostov-on-Don Age: 49 Posts: 54 Member: 955 Status: Offline Thanks Meter: 0	Hi to all! I have mw930 s2 d2.<br />phone ID : 080A81C12141<br />field 0 : 083A23813235633723<br />feld 191 : 3B37397D calculated unlock code : 09827697<br />new field 251 : 0x3A93E06D<br />this code MUST be ok - some people calculate code from logs of this phone & code the same... Phone says that code is incorrect. I check field 251 with ponyprog - 0x3A93E06D in eeprom. One man try unlock this phone befor, may be he change some data...((( what can i do in this situation? Thanx! WBR, MegaSlava

02-03-2002, 15:14	#8 (permalink)
MegaSlava Crazy Poster Join Date: Feb 2000 Location: Russia, Rostov-on-Don Age: 49 Posts: 54 Member: 955 Status: Offline Thanks Meter: 0	Hi again:-) I unlock this MW930! I calculate new code & field 251 with new value of field 251/191 - 0x3A93E06D and recieve new value for 251 - 0x3B37397D (it was my field 191). After this i change field<br /> 251 to 0x3B37397D by ponyprog and phone with code 09827697 is unlocked! I don't know why in this phone field 191 was 0x3B37397D and 251 was 0x3A93E06D! I hate sagem phones! <img src="biggrin.gif" border="0"> <img src="biggrin.gif" border="0"> <img src="biggrin.gif" border="0"> Thanx for help soft by Karlo and Cbot! WBR, MegaSlava

02-04-2002, 05:55	#9 (permalink)
Guest Insane Poster Join Date: Apr 2001 Location: KZ Age: 59 Posts: 89 Member: 4107 Status: Offline Thanks Meter: 1	Hi MegaSlava To what addresses in dump eeprom S2-D2 FF3,1T there are fields 191 and 251? WBR,Guest

02-04-2002, 17:44	#10 (permalink)
MegaSlava Crazy Poster Join Date: Feb 2000 Location: Russia, Rostov-on-Don Age: 49 Posts: 54 Member: 955 Status: Offline Thanks Meter: 0	2 Guest. Use sfe003 to find addresses of this fields. WBR, MegaSlava

02-05-2002, 06:01	#11 (permalink)
datalife2000 No Life Poster Join Date: Jan 2002 Location: Africa Posts: 2,053 Member: 8843 Status: Offline Thanks Meter: 117	Hi! <img src="smile.gif" border="0"> Where can i get sfe003 and how do i read as well as change the fields? How do i know which values to put in those fields?

02-05-2002, 11:35	#12 (permalink)
Guest Insane Poster Join Date: Apr 2001 Location: KZ Age: 59 Posts: 89 Member: 4107 Status: Offline Thanks Meter: 1	2 MegaSlava: 10x. Your solution good works. <br />2 datalife2000: check mail.

02-06-2002, 01:23	#13 (permalink)
GSM Deals No Life Poster Join Date: Apr 2001 Location: AGADIR Morocco Posts: 1,626 Member: 3936 Status: Offline Thanks Meter: 237	[quote]Originally posted by Me@n:<br /><strong>Are you sure ?<br /> Eeprom field 251 in MW930 is protected and you need pony to read it. regards<br />Me@n</strong><hr></blockquote> Ok guys excuse my ignorance just today i've a 922<br />ft4.1m from D2.impossible to read field 251 with sagem doctor after many tries the phone shows<br />"serv unruf"message i'm not skilled in deutsh but<br />i see the meaning is return to "CS" how can restore the phone at least to accept D2 card<br />regatds

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Read protected field 251 on MW930 S2-D2	wazl	Infineon C16X M51 & ARM7 M52 BASED	21	09-09-2003 20:38
Mw930 S2-D2 with hashtable 26	gilsie	Infineon C16X M51 & ARM7 M52 BASED	1	03-06-2002 00:19
how repair :hardware failure mw930 s2-d2	yui	Infineon C16X M51 & ARM7 M52 BASED	5	02-05-2002 17:08
MW930 S2 D2	dominik	Infineon C16X M51 & ARM7 M52 BASED	1	01-31-2002 20:14
SAGEM MW930 S2 D2	antonello	Infineon C16X M51 & ARM7 M52 BASED	0	01-30-2002 07:45