post here all UFS TORNADO flasher problems and bugs til date. - Page 53 - GSM-Forum

nizarx · 04-20-2006, 19:30

yes you can unlock 3220 with ufs all what you need is bb5 update that's all

shruti · 04-21-2006, 05:16

I need to know which voltage battery I have to use to unlock z520i.

andre128 · 04-21-2006, 06:20

Quote:

Originally Posted by jysmc

sorry,bcoz i'm alway use the latest main software version.so i don know..if i got this problem is hardware problem.

even you use latest v1.4e but your flash loader still is u_amd.fia (24.9kb) 11/10/2005

so if new flash chip problem! ufs still got bugs flashing these type phone

gogomit · 04-30-2006, 13:02

I can't flash 6100.with UFS I have this error 10 Why?

gogomit · 04-30-2006, 14:15

I solve my problem......

mamanacusa · 04-30-2006, 22:00

unlocking T630 and P910i with rsa kills them :S Need to flash them back...

lrpa · 05-07-2006, 19:31

Is there a bug in dctxbb5 1.4d, i try to flash 3120 (2 pcs) both using spansion 64kbit flash chip but ufs always detect as intel flash chip and give me erase error 10 just like gogomit but only difference is instead of amd fia i got intel fia. So how do you solve it gogomit please if you have the solution.

galaxi · 05-08-2006, 21:10

pls help calculate strings my box, sn: 80616
thx
br

mr_loverman · 05-13-2006, 14:33

1st Boot Err: Bad Resp UPP, 02 FF FF 72
whati is prablem?

matyjasz · 05-13-2006, 15:16

Quote:

Originally Posted by mr_loverman

1st Boot Err: Bad Resp UPP, 02 FF FF 72
whati is prablem?

check connection, re-run sw, CABLE connection. Otherwise make flash_update

. post results

respect

EDY.PM · 05-13-2006, 22:00

hi there
i got 1 samsung x495 , it was lock by other provider, ( wrong card )
i tryed to unlock it by ufs , erverything was done but same problem .
any suggestions ???

MAGICMOBILE · 05-14-2006, 01:19

Quote:

Originally Posted by EDY.PM

hi there
i got 1 samsung x495 , it was lock by other provider, ( wrong card )
i tryed to unlock it by ufs , erverything was done but same problem .
any suggestions ???

use calculated code by ufs

G Zaman · 05-14-2006, 06:09

hi all
;- i have flash 3510i with ufs3 mcu+ppm ver 5.4 after flash there is no display on screen when i got its info the mcu file can,t can,t change the ver5.4 but its still 4.01 but ppm was 5.4 i have tryed flash again and again but i facing still the mcu ver not chang.
plzzzzzzzz any one help???????????

EDY.PM · 05-14-2006, 10:16

Quote:

Originally Posted by MAGICMOBILE

use calculated code by ufs

dear magicmobile
sorry 4 my stupit question ; how can i calculated code by ufs ???

bbgrace · 05-15-2006, 04:25

Quote:

Originally Posted by Pardoon

u jus need to flash the CNT wif the back image_128 that all !

I ALREADY TRY MANY CNT WITH 128 LIKE g_128, a_128, b_128..
why still the same problem?
if i wan to change the theme, it show operation fail, WHY????
u have cnt s_128?
can post here?

05-13-2006, 22:00	#791 (permalink)
EDY.PM Freak Poster Join Date: Aug 2005 Age: 42 Posts: 273 Member: 171288 Status: Offline Thanks Meter: 23	samsung unlock failed hi there i got 1 samsung x495 , it was lock by other provider, ( wrong card ) i tryed to unlock it by ufs , erverything was done but same problem . any suggestions ???

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Post here all successfuly flashed, unlocked and repaired phones with ATF software.	dr_aybyd	Advance-Box	6048	02-04-2019 16:48
Post here all Nokia 1200,1208,1209 and 1650 Network problems	mobilecitycbk	Nokia Hardware & Hardware Repair	12	09-20-2015 04:01
Post here all UFS 3 Tornado Box Tutorilas and videos??	nofear99	Nokia Base Band 5 ( BB-5 )	2	01-24-2015 06:12
all members can post here all moto L7.L6.V3 and more of problem and also post solutio	786sunny	Motorola Hardware Repair	3	04-12-2007 17:53

04-20-2006, 19:30	#781 (permalink)
nizarx Crazy Poster Join Date: Jun 2005 Age: 48 Posts: 57 Member: 155145 Status: Offline Thanks Meter: 1	yes you can unlock 3220 with ufs all what you need is bb5 update that's all

04-21-2006, 05:16	#782 (permalink)
shruti Insane Poster Join Date: Apr 2006 Posts: 74 Member: 255861 Status: Offline Thanks Meter: 0	I need to know which voltage battery I have to use to unlock z520i.

04-30-2006, 14:15	#785 (permalink)
gogomit Freak Poster Join Date: Jul 2002 Location: Sofia,Bulgaria Age: 47 Posts: 352 Member: 13917 Status: Offline Thanks Meter: 14	I solve my problem......

04-30-2006, 22:00	#786 (permalink)
mamanacusa Junior Member Join Date: Mar 2005 Age: 41 Posts: 15 Member: 126840 Status: Offline Thanks Meter: 0	unlocking T630 and P910i with rsa kills them :S Need to flash them back...

05-07-2006, 19:31	#787 (permalink)
lrpa Freak Poster Join Date: Feb 2005 Age: 49 Posts: 217 Member: 118395 Status: Offline Thanks Meter: 25	Is there a bug in dctxbb5 1.4d, i try to flash 3120 (2 pcs) both using spansion 64kbit flash chip but ufs always detect as intel flash chip and give me erase error 10 just like gogomit but only difference is instead of amd fia i got intel fia. So how do you solve it gogomit please if you have the solution.

05-08-2006, 21:10	#788 (permalink)
galaxi Freak Poster Join Date: Aug 2001 Location: Earth Age: 42 Posts: 478 Member: 5915 Status: Offline Thanks Meter: 7	pls help calculate strings my box, sn: 80616 thx br

05-13-2006, 14:33	#789 (permalink)
mr_loverman No Life Poster Join Date: Oct 2004 Location: Tbilisi Age: 42 Posts: 607 Member: 87722 Status: Offline Thanks Meter: 112	1st Boot Err: Bad Resp UPP, 02 FF FF 72 whati is prablem?

05-14-2006, 06:09	#793 (permalink)
G Zaman Junior Member Join Date: Apr 2006 Posts: 16 Member: 268812 Status: Offline Thanks Meter: 8	hi all ;- i have flash 3510i with ufs3 mcu+ppm ver 5.4 after flash there is no display on screen when i got its info the mcu file can,t can,t change the ver5.4 but its still 4.01 but ppm was 5.4 i have tryed flash again and again but i facing still the mcu ver not chang. plzzzzzzzz any one help???????????