Repair Dead Or Not Booting Ufs Here..

[teleeng]

I Change Eeprom 93C46 , ATMEGA16 from New Ufs3 Change Xtal 6.000 & 16.000 And Change TUSB2046B & FT232B But no rusult can't receive the Driver. So Can't support Mprog 2.3 and Twister Tool. Uselly this problem in Eeprom 93C46 But this not Eeprom problem. Please any one help me for this Problem. Thanks
Hamid
[email protected]

[Tinotenda]

Thanks Box Working Now

[stanner_austin]

Originally Posted by Tinotenda

Thanks Box Working Now

your welcome..

thank you to for posting results

[biochemistali]

Originally Posted by Small_boy

box_auth_error:xx : try use this program, please don use if your box is original!
i also cheater by dealer who sell me box! if you are serious in repair business, i suggest you get a good and right reseller! But it seem to me getting the corect reseller is not easy as well! Anyway searching for clone solution is very time comsuming!
Last but not least, thanks for people who provide clone box solution!
I hope that the original box provided can provide more easy and standard information! best if can have all their reseller have the same standard web page for their respective product!

its working. also checked by me
br

[tuhingr]

my box is dead with mprog. now only fighter cable. mprog not found any device.
i also erase program.
now how can i alive it, help!

[stanner_austin]

Originally Posted by tuhingr

my box is dead with mprog. Use only fighter cable. mprog not found any device.
i also erase program.
now how can i alive it, help!

search in this thread ..
and read with opened eyes..

this thread maked for damaged box..
hope you find and post good results.

[Phreackgsm]

Hi.

Yes, yes, old problem usb <-> serial

I think instal a bad driver in c:\Program files\Mrog\Drivers.

And Now no posible instal other driver, only one option, and error in Mprog is:

Number Of Blank Devices = 1
Number Of Programmed Devices = 0

I delete driver FTDI FT8U2XX Device, reinstal again a new driver, but now corrects selected i think correct driver FTD2xx.inf, and again instal FTDI FT8U2XX Device , test alls .inf and iden problem :/.




Bro.

[Phreackgsm]

Hi.

I delete file FTDI FT8U2XX Device, but no posible install FTDI Dual 232B USB Test Board, i search this file in c:\Program files\MProg 2.3\Drivers, but only posible install FTDI FT8U2XX Device.

My computer its AMD 64 Procesor, and only one option, pictures:

[mkwatis]

@cyahus2k error erasing you must re-program your atmega by Hi-Lo system or MPlaB...

???can i get the schematic for Hi-Lo system or MPlaB...or aplace where i can buy this device

[stanner_austin]

Originally Posted by mkwatis

@cyahus2k error erasing you must re-program your atmega by Hi-Lo system or MPlaB...

???can i get the schematic for Hi-Lo system or MPlaB...or aplace where i can buy this device

YOU CAN USE AVR ISP.
CHECK THIS FORUM AND USE MASTER BLASTER "SEARCH"

YOU GET IT ALL

[stanner_austin]

Originally Posted by Phreackgsm

Hi.

I delete file FTDI FT8U2XX Device, but no posible install FTDI Dual 232B USB Test Board, i search this file in c:\Program files\MProg 2.3\Drivers, but only posible install FTDI FT8U2XX Device.

My computer its AMD 64 Procesor, and only one option, pictures:

SORRY FOR LATE..
BUT I THINK UR MISSING ONE THING
IF FTDI ERASED.
FACTORY BASE EMPTY FTDI SHOW THIS AND ACCEPT ONLY FACTORY DRIVER ITS IN
MPROG/DRIVER

YOU HAVE TO INSTALL THAT
AND USE MPROG TO WRITE UFS EEPROM FOR FTDI..
THEN RECONENCT BOX
ITS FOUND AS UFS...

THEN LEFT IS FIRMWARE REWRITE U CAN DO IT WITH UFSTOOLS..

[gsm_wrold2007]

http://www.ftdichip.com/Resources/Ut...g3.0_Setup.exe

new download

[gsm_wrold2007]

I delete file FTDI FT8U2XX Device, but no posible install FTDI Dual 232B USB Test Board, i search this file in c:\Program files\MProg 2.3\Drivers, but only posible install FTDI FT8U2XX Device.

[gsm_wrold2007]

i think okkkkkkkkkkkkkkkk

[crack3war]

Solution 100% tested ...thx