|
Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. Only registered members may post questions, contact other members or search our database of over 8 million posts. Registration is fast, simple and absolutely free so please - Click to REGISTER! If you have any problems with the registration process or your account login, please contact contact us . |
|
Register | FAQ | Donate | Forum Rules | Root any Device | ★iPhone Unlock★ | ★ Direct Codes ★ | Direct Unlock Source |
Various AEG, Bosch/Dancall, Toshiba, Vitel, Maxon, Sendo .... and any other Phone which can't find any serving section for it...... |
| LinkBack | Thread Tools | Display Modes |
08-08-2005, 05:02 | #16 (permalink) |
Freak Poster Join Date: Nov 2004 Location: Ngeria Age: 42
Posts: 247
Member: 94542 Status: Offline Sonork: 104341 Thanks Meter: 77 | Turn ON the phone and type: *#9917# To enter Unlock Code in TSM100? Type: ****987 + Call To Enter Unlock Code in TSM100v/TSM30? Type: ##**9987 + Call regards |
The Following User Says Thank You to .::sly::. For This Useful Post: |
08-08-2005, 05:06 | #17 (permalink) |
Freak Poster Join Date: Nov 2004 Location: Ngeria Age: 42
Posts: 247
Member: 94542 Status: Offline Sonork: 104341 Thanks Meter: 77 | Unlock procedure Hp IPAQ 6315: 1. On the Today screen, tap Start > Settings. 2. Tap the Phone Band icon. 3. Tap Shift + Ctl key to enable the keys. 4. Tap the area below the band selection box to open the unlock tool. 5. Tap Shift + Ctl to disable the keys. Shift +Ctl keys disabled Shift + Ctl keys enabled 6. Enter the 8-digit unlock code and tap OK when done. 7. Wait for the device to validate the unlock code (about five seconds). You will see one of the following screens: -Unlock successful. -Unlock failed due to incorrect code. The user has three attempts to unlock. After three attempts, the device will refuse any more unlocking attempts. Perform a soft reset to reset the counter to perform additional unlocking attempts. -Device is not ready for unlocking. This error message displays when the user tries to unlock when the phone application (not the device) is not in a steady state. It takes 30 seconds after powering on the phone for it to reach a steady state. This code has not been tested by me, If anybody has try this let us know if it works Regards |
The Following User Says Thank You to .::sly::. For This Useful Post: |
08-08-2005, 09:42 | #18 (permalink) | |
No Life Poster Join Date: Dec 2002 Location: nigeria
Posts: 661
Member: 18926 Status: Offline Sonork: ndagi Thanks Meter: 52 | ur share very old too friend! Quote:
| |
The Following User Says Thank You to ndagi For This Useful Post: |
08-08-2005, 10:56 | #19 (permalink) |
No Life Poster Join Date: Jul 2005 Location: zunZun Team Age: 43
Posts: 10,185
Member: 166270 Status: Offline Sonork: 100.1579747 Thanks Meter: 12,673 | Any codes generator for Nec e101? Tks in advance. |
The Following User Says Thank You to elcapitel For This Useful Post: |
08-09-2005, 13:48 | #20 (permalink) | |
Freak Poster Join Date: Nov 2004 Location: Ngeria Age: 42
Posts: 247
Member: 94542 Status: Offline Sonork: 104341 Thanks Meter: 77 | Quote:
you have to believe there people who still under training and some just started, this code is very relevant and useful for them, Also recomended for lesson note for trainers please dont let us disqualify any post Thanks for your contribution | |
The Following User Says Thank You to .::sly::. For This Useful Post: |
08-09-2005, 14:13 | #21 (permalink) |
Freak Poster Join Date: Jun 2003 Location: 9 JA
Posts: 313
Member: 30405 Status: Offline Thanks Meter: 3 | Old codes u all hav here..........................!!!!! Codes dont work on new phone versions this days !!!! dont be lazy, search 4 new crack softwares instead of CODES**** |
08-12-2005, 22:15 | #23 (permalink) |
No Life Poster Join Date: Nov 2001 Location: morocco larache Age: 51
Posts: 582
Member: 7334 Status: Offline Sonork: 100.112291 Thanks Meter: 47 | i need contact retailer reset for 6670 thanks for help |
The Following User Says Thank You to mzkahack29 For This Useful Post: |
08-13-2005, 13:47 | #24 (permalink) |
No Life Poster Join Date: Jul 2004 Location: Gujranwala Pakistan Age: 48
Posts: 759
Member: 71190 Status: Offline Sonork: 100.1580485 Thanks Meter: 87 | To view IMEI (International Mobile Equipment Identity) number enter *#06# Alcatel 501 Codez Init codes: ###847# Reset to factory defaults (danger...) ###337*07# Phone restart Language selectors: *#0000# Automatic *#00xx# xx= 07,27,41,44,61,63,64,84,91,92,94 English xx= 43,49 Deutsch xx= 48 Polski *#0420# Czech *#0421# Slovak ** unlock -Master code : Alcatel HD1, HE1 : 25228353 Alcatel BE1, BE3 : 25228352 Alcatel BE4, BE5 : 83227423 -Lock/Unlock codes: (ask your Provider for network codes... ) ###765*02# Add ###765*78# Deactivate ###765*05# ? ###765*07# Erase ###765*08# Unlock -Removing SP lock on Alcatel Easy This is how to remove the SP lock on Alcatel (one touch) Easy. (You wil need a cable, a eeprom device and some sw) Edit the eeprom: Address Replace with ------------- --------------- 176h FFh 177h FFh |
The Following User Says Thank You to nobal1976 For This Useful Post: |
08-13-2005, 13:48 | #25 (permalink) |
No Life Poster Join Date: Jul 2004 Location: Gujranwala Pakistan Age: 48
Posts: 759
Member: 71190 Status: Offline Sonork: 100.1580485 Thanks Meter: 87 | BENEFON Q TGP75EU Finland Memory chip: 24C256 Security code don't CRYPTED. Security code area starts at : 03A1h-03A9 "Security Code" 3233353800000100 =(2358) 2 3 5 8 -> Sec code Tested with sw : 2.2X3714H DATE |
The Following User Says Thank You to nobal1976 For This Useful Post: |
08-13-2005, 13:51 | #26 (permalink) |
No Life Poster Join Date: Jul 2004 Location: Gujranwala Pakistan Age: 48
Posts: 759
Member: 71190 Status: Offline Sonork: 100.1580485 Thanks Meter: 87 | FOR Benq m300 *#300# send = sw ver... *#301# send = manual test |
The Following User Says Thank You to nobal1976 For This Useful Post: |
08-13-2005, 13:52 | #27 (permalink) |
No Life Poster Join Date: Jul 2004 Location: Gujranwala Pakistan Age: 48
Posts: 759
Member: 71190 Status: Offline Sonork: 100.1580485 Thanks Meter: 87 | Sony CMD-X1000 Secret Codes IMEI Nummer = *#06# Monitormodus = Menü Geräteinformation,zweimal linke Navigationstaste, 7684666, zweimal rote Hörertaste Softwareinformationen = Sim-Karte entnehmen,*#06#, linke Softtaste Palmenbild = unter "eigenen Rufnummer" *12022243121 eingeben Sony CMD-X2000 Secret Codes IMEI Nummer = *#06# Monitormodus = Menü Geräteinformation,zweimal linke Navigationstaste, 7684666, zweimal rote Hörertaste Softwareinformationen = Sim-Karte entnehmen,*#06#, linke Softtaste Palmenbild = unter "eigenen Rufnummer" *12022243121 eingeben Sony CMD Z1 Secret Codes IMEI Nummer = *#06# Softwareversion = *#8377466# Sony CMD Z5 Secret Codes IMEI Nummer = *#06# Softwareversion = *#7353273# Simlock Status = *#7465625# |
The Following User Says Thank You to nobal1976 For This Useful Post: |
08-13-2005, 13:53 | #28 (permalink) |
No Life Poster Join Date: Jul 2004 Location: Gujranwala Pakistan Age: 48
Posts: 759
Member: 71190 Status: Offline Sonork: 100.1580485 Thanks Meter: 87 | Sharp TM150 : *01763*8781# (*01763*TST1#) --- Test #1 *01763*8782# (*01763*TST2#) --- Test #2 *01763*8783# (*01763*TST3#) --- Test #3 *01763*8784# (*01763*TST4#) --- Test #4 *01763*8785# (*01763*TST5#) --- Test #5 *01763*87872# (*01763*TST72#) --- Test #72 *01763*8788# (*01763*TST8#) --- Test #8 *01763*5640# (*01763*LOG0#) --- Disable LOG *01763*5641# (*01763*LOG1#) --- Enable LOG *01763*3640# (*01763*ENG0#) --- Disable Engineer Mode *01763*3641# (*01763*ENG1#) --- Enable Engineer Mode *01763*4634# (*01763*IMEI#) --- IMEI *01763*6370# (*01763*MEP0#) --- Disable MEP menu (unlock menu) *01763*6371# (*01763*MEP1#) --- Enable MEP menu (unlock menu) *01763*63866330# (*01763*NETMODE0#) --- Disable NetMode *01763*63866331# (*01763*NETMODE1#) --- Enable NetMode *01763*8371# (*01763*VER1#) --- Firmware Version ----------------------------------------------------------------- sharp reset EEP 1, push at once key 0+3+right option key up+red key (white screen) 2, in sequence push key 0,1,2,3, right option key up,1 (service menu) 3, write 99 and push right option key up 4, write 01 and push right option key up (now start RESET EEPROM) Wait..... 5, push any key 6, push blue key menu (save) 7, power off Sharp GX-10 unlock solution With Sim Card (of locked network) in phone: *01763*6371# and press M. In menu go to: SETTINGS->SELECT->SECURITY then in Security menu:MEP LOCKS->SELECT insert default security code 0000 In menu go to NETWORK and choose DEACTIVATE press SELECT and insert 812664697614 Press OK, phone anwser will be: DONE . phone unlocked Sarp Gx15/20/30 Tm100 Phone is on test mode you can see **** on phone display For finishing unlock folow the next steps : Press 1 on phone keypad Press 99 Press right top key Press 3 FOR UNLOCK or Press 1 FOR FACTORY DEFAULT Press roight top key Wait to see on display format ok Press right top key 3 times or more until phone is off |
The Following User Says Thank You to nobal1976 For This Useful Post: |
08-13-2005, 13:54 | #29 (permalink) |
No Life Poster Join Date: Jul 2004 Location: Gujranwala Pakistan Age: 48
Posts: 759
Member: 71190 Status: Offline Sonork: 100.1580485 Thanks Meter: 87 | E710/715 *#32436837# DAI ON Digital Audio Interference On *#3243948# DAI OFF Digital Audio Interference Off *#9324# MONITOR *#0746# SSMS MEMORY:20 *#0842# vibra on *#0289# buzzer on *#4357# HELP (4357) This screen!!!!!!! *#7777# verze SW *#8888# verze HW *#9999# Revize HW *#0782# cas provozu, zapnití a vypnití - LIVE TIMER *#0523# 41 (80) menu: 12 *#0638# SIM: f23003 F230 030 *#0778# SST size: 10 *#9273696# Java D/L setting *#92782# Wap user agent *#9998*5646# change operator logo at startup *#9998*76# production number *#9998*968# view melody for alarm - YAMAHA OK *#0778# Sim Service table *#9998*523# or *#9998*0523# or *#0523# Display Contrast *#9998*288# or *#9998*0288# or *#0288# Battery & Field Infos *#9998*5282# Java menu (GRPS/CSD settings for JAVA server) E700/S500 100%..... X100/X600???!!!??? #*566335# Wap model ID #*5663352# java model #*5663351# model #*53696# java download mode #*536963# serial enabl others disabled #*536962# HTTP enabl WAPSAR disabled #*536961# WAPSAR enabl HTTP dis *663867 MF file dumped *335 All MMS mes deled *2767*77667# Spain MMS settings *2767*78667# Portugal *2767*65667# Netherland *2767*29667# Czech *2767*28667# Austria *2767*48667# Italy *2767*37667# France *2767*85667# Uk *2767*33667# Germany *2767*73738927# MMS Reset???? *2767*77927# Spain WAP Setting are applied *2767*78927# Portugal *2767*29927# Czech *2767*65927# Netherlands *2767*28927# Austria *2767*37927# France *2767*48927# Italy *2767*85927# Uk *2767*33927# Germany #7263867# Ram Dump On #*3232# Current Mode - DCD mode #*3231# DCD en TRACE dis #*3230# TRACE en DCD dis #*7247# ?????? #*3683# ?????? #*3777# ?????? #*3779# ?????? #*8645# ?????? #*6428# MIC measuremnt CMD: Set, DSPMTCV11, MICHDW in cihard. opt #*6422# MIC dep RXdata CMD: Set, DSPMTCV11, MICHDW in cihard. opt #*6421# MIC on CMD: Set, DSPMTCV11, MICHDW in cihard. opt #*6420# MIC off CMD: Set, DSPMTCV11, MICHDW in cihard. opt *#7465625# Stav zámku #7465625*28746# Aktivní zámek deaktivován *7465625*28746# Automatický zámek perzonalizován #7465625*2827# Zámek Auto CP deaktivován *7465625*2827# Zámek síte se musí aktivovat #7465625*2877# Zámek Auto SP deaktivován *7465625*2877# Zámek síte se musí aktivovat #7465625*28782# Automatický zámek podskupiny deaktivován *7465625*28782# Zámek síte se musí aktivovat #7465625*28638# Automatický zámek síte deaktivován *7465625*28638# Automatický zámek síte perzonalizován #7465625*228# Aktivní zámek deaktivován *7465625*228# Aktivní zámek perzonalizován #7465625*746* ??????? *7465625*746* ??????? #7465625*27* ??????? *7465625*27* ??????? #7465625*77* ??????? *7465625*77* ??????? #7465625*782* ??????? *7465625*782* ??????? #7465625*638* ??????? *7465625*638* ??????? *#8377466# SW + HW info *#8888# HW info *#9999# SW info *#8999*8376263# komplet info *#8999*636# IPD info #*2677# ARM state: None #*0000# ?????? *#8999*324# Net monitor?? #*6200# #*6700# #*6900# #*7200# neplatná úroven prístupu #*6100# command #*6100# Executed *2767*3700# SGH-E700 BSI *2767*7100# SGH-S100 *2767*8200# SGH-V200 *2767*7300# SGH-S300 #0111*codigo# *2767*637# *2767*688# *2767*wap# *2767*media# *2767*mms# *2767*226372# Camera Reset *2767*688# MEP off *2767*927# WAP *2767*2878# E2P Custom reset *2767*3855# E2P Full reset *2767*2878# Sec reset #*7828# C??? Midi Ri51 #*5111# PI 0813 33 99 MSI 7 NA 0 18 P99 T00 CffHff #*2562# nejakej reset #*2565# no blocking General Defense #*3353# General defense Code Erased #*3837# reset ??????? #*3849# reset ??????? #*3851# reset ??????? #*3876# reset ??????? #*7337# reset ??????? #*5376# reset All SMS Deleted #*7222# Operation Typ: Class C GSM #*7224# Error!!!! #*7252# Operation Typ: Class B GSM #*7271# multi Slot Class 1 GPRS #*7274# multi Slot Class 4 GPRS #*2787# CRTP on - Batery options #*3737# L1 AFC DeltaF -36 NbAfcCorr 0 AdjustFoi 0 CumFoi 0 #*3825# Command #*3825# Executed #*5133# L1 HO Data Async HO 83 Sync HO 0 HO Fail 0 TCH 40 #*7288# GPRS Detached #*7287# GPRS Detached #*7666# SrCell data RAC 255 NMO 255 #*7693# Sleep Deact #*7284# Class B #*2256# Calibr - info #*2286# DATAbattery #*2527# GPRS switching set to class 4 #*2679# Copycat feat. Activated #*3940# External looptest 9600bps not avalible in SYSOL2! #*4263# handsfree mode Activated #*4700# Half rate deact #*7352# BVMC Reg vaule Set BMVC to 00H For Cmd set DEBUGBATTERY in cihard.opt #*8462# Sleeptime sinc SwitchOf #*2558# Time ON For Cmd set DEBUGBATTERY in cihard.opt #*3370# EFR Deact #*3941# External looptest 115200bps not avalible in SYSOL2! #*5176 L1 Sleep TOI N:5 TOI P:0 #*7462# SIM phase 3 #*7983# Voltage/Freg Deact #*7986# Voltage Activated #*8466# Old time #*2255# Call failed mode: Command not Implemented #*2285 nic #*46539 nic #*5143 nic #*7629 nic #*7646 nic #*7665 nic #*7633 nic #*7626 nic #*5174 nic #*5175 nic #*5177 nic #*5156 nic #*2282 nic #*5132 nic #*7276 nic #*2355 nic #*3333 nic #*3377 nic #*5187# L1C2G trace Activated #*6837# Official SW version: 120107A1 #*7524# KCGPRS: +data #*7562# LOCI GPRS: +data #*7638# RLC allwazs open ended TBF Actiated #*7632# Sleep mode Debug: +data #*7673# Sleep mode RESET #*2337# Permanent Registrtion Beep: NOT YET IMPLEMENTED #*2474# For Cmd set DEBUGBATTERY in cihard.opt #*2834# Audio Pth Mobile Normal #*3270# DCS support Deact #*3282# Data Deact #*3476# EGSM Deact #*3676# falh volume formated #*4674# IMSI: +data #*4760# GSM Activated #*4864 pro tento model nic #*5171 data #*5172 data #*5173 data #*7326# Accessorz: vibrator #*7676# Command #*7676# Executed #*7683# Sleep variable #*7762# SMS Bearer CS Activated #*7957# Command #*7957# Executed #*8465# Time in L1 +data #*9278# Command #*9278# Executed #*9795# WTLS key Reset #*2252# Current call: +data #*2836# AVDDSS Managment Deact. #*3877# Dump of SPY trace: +data #*7728# RSAV done |
The Following User Says Thank You to nobal1976 For This Useful Post: |
08-13-2005, 13:55 | #30 (permalink) |
No Life Poster Join Date: Jul 2004 Location: Gujranwala Pakistan Age: 48
Posts: 759
Member: 71190 Status: Offline Sonork: 100.1580485 Thanks Meter: 87 | IMEI *#06# SAGEM 612,615,715,725,730 Secret menu MENU 5 1 1 # |
The Following User Says Thank You to nobal1976 For This Useful Post: |
Bookmarks |
| |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
> All codes for samsung mobiles.......[check this out...] | kashem403342 | Nokia Base Band 5 ( BB-5 ) | 1 | 03-29-2010 14:54 |
code BLAUPUNKT SEAT SE 359 | iced_clarion | CAR Electronics | 2 | 03-29-2010 12:16 |
Need unlock CODE FOR 8900 CURVE | mbagen | BlackBerry (RIM) | 1 | 03-29-2010 12:16 |
All codes for samsung mobiles.......[check this out...] | kashem403342 | Samsung Flashers, Software, Firmware. | 0 | 03-29-2010 12:09 |
BE2569 code from dump | balanel | CAR Electronics | 2 | 03-29-2010 10:37 |
|