9110 whith Twister

[Leshy]

www.twisterflasher.com

DCT3-9110

but i have read ,that twister cann not flash 9110 is it true ? can twister that ?

[epic]

yes, not support 9110 at the moment.

BR,
epic

[Leshy]

a`m not happy

[Leshy]

and what a problemm ? to flash Phone part as 5110 whith DCT flasher it is possible (i had make it) and whith Twister not

Faid Calc whith twister whithout problemm ,so so ..............

@ Raskal
it`s realy clever what you make , just erasure the 9110 from support ,realy clever

[Raskal]

Originally Posted by Leshy

and what a problemm ? to flash Phone part as 5110 whith DCT flasher it is possible (i had make it) and whith Twister not

Faid Calc whith twister whithout problemm ,so so ..............

@ Raskal
it`s realy clever what you make , just erasure the 9110 from support ,realy clever

No dct4 flasher on the market (Twister, Griffin, UFS, Tornado, Prodigy) is flashing 9110 and we do not provide any cable for it, and no one provide a cable for it.

[Leshy]

Originally Posted by Raskal

No dct4 flasher on the market (Twister, Griffin, UFS, Tornado, Prodigy) is flashing 9110 and we do not provide any cable for it, and no one provide a cable for it.

Cable from 9210 passt 100% MBUS ,RT ,TX ,GROUND ,all are same ,its no more needed ,a had make an Adapter from 9210 cable from Twister to DCT3 flasher ,so Cable is O.k. But I don`t understand , why Twister cannnot do it .

Twister can all DCT3 , and 5110 too , so , from Software its no difference 9110-5110

[Sha]

Originally Posted by Leshy

Cable from 9210 passt 100% MBUS ,RT ,TX ,GROUND ,all are same ,its no more needed ,a had make an Adapter from 9210 cable from Twister to DCT3 flasher ,so Cable is O.k. But I don`t understand , why Twister cannnot do it .

Twister can all DCT3 , and 5110 too , so , from Software its no difference 9110-5110

Sorry,
but here need a little bit more.

MAYBE will release in future flashing
of this antiquarian rarity from 20th century ...

[Leshy]

I´ll bee waiting............

[nokiaking]

Originally Posted by Leshy

Cable from 9210 passt 100% MBUS ,RT ,TX ,GROUND ,all are same ,its no more needed ,a had make an Adapter from 9210 cable from Twister to DCT3 flasher ,so Cable is O.k. But I don`t understand , why Twister cannnot do it .

Twister can all DCT3 , and 5110 too , so , from Software its no difference 9110-5110

Updating the MCU part is no problem, but the PDA part is.

You have to remove the label underneath the 9110(i) battery and then you will see some test points that are needed for updating. So for servicing a 9110(i) only having the 9210(i) cable will not do the job. You need to have the special battery connector also.

[Leshy]

I can update PDA part whith MMC Card ,so i told hier about Phone part only

[nokiaking]

Originally Posted by Leshy

I can update PDA part whith MMC Card ,so i told hier about Phone part only

I am sorry.... for updating the MCU part you need to have the special flash battery (BBS-5) or short pin 15/16 in another way underneath the battery.

This is for the MCU part the procedure:

1) Remove sticker with text underneath the battery
2) connect pin 15 and 16 together
3) insert battery
In de PDA display are coming some dots and then the message
'relink mode enabled'
Your EPOC is now stopped and the GSM part works a 5110
4) Flash it like you did a 5110 with Dejan flasher
(you can use any sw you like, just choose 5110 as option)
5) Set FAID after flashing with EEPROMtools 3.1
6) Remove battery and open link between pin 15 and 16
7) should work now

[Leshy]

this is the way ,that i had done ,but the question is to flash whith TWISTER