Sony Ericsson X10i Charging Solution-HOT - Page 3 - GSM-Forum

gogomit · 05-27-2011, 09:47

I have X10i, the charge connection is ok, but phone only power on when I put the charger in, and don't charge,I made jumper on the IC .but the same.Where is the problem

badsha007 · 05-30-2011, 20:23

thanks sir ........its working....................

tectec · 06-23-2011, 23:06

Hi friend, my problem is in Pin4 conector charger, this pin is Broken, in service manual PIN4 is NC, but I do not find this pin in the service manual. I made the jump as another post below, but only loads connected to the PC.

lasty · 06-23-2011, 23:15

If it`s the second leg from the left as in picture then u don`t have to connect it anywhere.

tectec · 06-24-2011, 14:20

all routes were removed, as I retraced the figure posted in another post, but the phone will not in the original charger, only via USB.

lasty · 06-24-2011, 18:51

Did u remove/jumped the ic?
If u do everything right it needs to work but there is a possibility that ur board itself is demaged somewhere.

tectec · 06-25-2011, 14:02

Quote:

Originally Posted by lasty

Did u remove/jumped the ic?
If u do everything right it needs to work but there is a possibility that ur board itself is demaged somewhere.

Yes, ic jumped, but only charger via pc usb. When remove cable from charger conector the Led green lights. When insert again not light and not charger via original charger.

ashnay · 06-27-2011, 12:24

thanks brother........................................... ......................

gisimian · 08-17-2011, 17:08

thank you very mutch

extremesss · 08-22-2011, 12:47

very nice bro ..................... thats working

satcheee · 08-24-2011, 07:28

Hi Guys so do i remove micro usb then remove IC then soldier wires from those points to the otherside of the board then reflow micro usb back on again ???

i dont quite understand what you guys are doing im quite capable of the work just not sure what to do ?

can someone explain to me please

Cheers

satcheee

also is it possible a battery wont charge because of a dud battery it gets me into OS if i charge the batt outside of the phone ?

shahrukh khan · 08-25-2011, 21:53

thank,s brother i wonaa new fiez side,z any bady help meee

SUHAIL_76 · 08-26-2011, 13:49

hi i have broken the ic near charging socket of xperia 10i & now i cant connect to usb plz help me out i thing u guys r very gud at it plz ne one to help me thanxs

karabey · 09-11-2011, 21:22

can please anyone add an done jumper pic???

ebu mohammed-emin · 09-11-2011, 21:35

look good !
any one test it?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
need ericsson 88 cable	migdamas	Old Ericsson Phones & Sony Phones	2	03-24-2017 16:24
Anybody know solution	Robi	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	12-10-2014 12:35
Solution for GSM phones!?!?!?!?	todosije	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	12-16-2010 05:52
NEW ERICSSON A1018 £60 SIEMANS C25 £60 + LOADS MORE	MILLENNIUM-INTERNATIONAL	Main Sales Section	0	08-31-1999 18:54
!!!!!!TO ALL NOKIA 51XX/61XX SP LOCKS 1,2,3,4 SOLUTION latest news!!!!!	spterminator	Main Sales Section	2	08-13-1999 05:55

05-27-2011, 09:47	#31 (permalink)
gogomit Freak Poster Join Date: Jul 2002 Location: Sofia,Bulgaria Age: 47 Posts: 352 Member: 13917 Status: Offline Thanks Meter: 14	I have X10i, the charge connection is ok, but phone only power on when I put the charger in, and don't charge,I made jumper on the IC .but the same.Where is the problem

05-30-2011, 20:23	#32 (permalink)
badsha007 Freak Poster Join Date: May 2009 Location: ATHENS-GREECE Age: 42 Posts: 248 Member: 1022280 Status: Offline Thanks Meter: 14	thanks sir ........its working....................

06-23-2011, 23:15	#34 (permalink)
lasty Freak Poster Join Date: Nov 2006 Location: UK Posts: 488 Member: 395587 Status: Offline Thanks Meter: 63	If it`s the second leg from the left as in picture then u don`t have to connect it anywhere.

06-24-2011, 14:20	#35 (permalink)
tectec Freak Poster Join Date: May 2005 Location: Brazil Age: 41 Posts: 200 Member: 147972 Status: Offline Thanks Meter: 16	all routes were removed, as I retraced the figure posted in another post, but the phone will not in the original charger, only via USB.

06-24-2011, 18:51	#36 (permalink)
lasty Freak Poster Join Date: Nov 2006 Location: UK Posts: 488 Member: 395587 Status: Offline Thanks Meter: 63	Did u remove/jumped the ic? If u do everything right it needs to work but there is a possibility that ur board itself is demaged somewhere.

06-27-2011, 12:24	#38 (permalink)
ashnay Major Poster Join Date: Feb 2006 Posts: 47 Member: 237131 Status: Offline Thanks Meter: 3	thanks brother........................................... ......................

08-17-2011, 17:08	#39 (permalink)
gisimian Junior Member Join Date: Jun 2010 Posts: 21 Member: 1331885 Status: Offline Thanks Meter: 2	thank you very mutch

08-22-2011, 12:47	#40 (permalink)
extremesss Freak Poster Join Date: Feb 2005 Age: 44 Posts: 165 Member: 116294 Status: Offline Thanks Meter: 20	very nice bro ..................... thats working

08-24-2011, 07:28	#41 (permalink)
satcheee Junior Member Join Date: Aug 2011 Posts: 2 Member: 1641361 Status: Offline Thanks Meter: 0	Hi Guys so do i remove micro usb then remove IC then soldier wires from those points to the otherside of the board then reflow micro usb back on again ??? i dont quite understand what you guys are doing im quite capable of the work just not sure what to do ? can someone explain to me please Cheers satcheee also is it possible a battery wont charge because of a dud battery it gets me into OS if i charge the batt outside of the phone ?

08-25-2011, 21:53	#42 (permalink)
shahrukh khan Junior Member Join Date: Nov 2006 Location: gilgit baltistan Posts: 31 Member: 399880 Status: Offline Thanks Meter: 8	thank,s brother i wonaa new fiez side,z any bady help meee

08-26-2011, 13:49	#43 (permalink)
SUHAIL_76 Junior Member Join Date: May 2007 Posts: 30 Member: 503414 Status: Offline Thanks Meter: 2	hi i have broken the ic near charging socket of xperia 10i & now i cant connect to usb plz help me out i thing u guys r very gud at it plz ne one to help me thanxs

09-11-2011, 21:22	#44 (permalink)
karabey No Life Poster Join Date: Nov 2003 Age: 42 Posts: 1,055 Member: 45183 Status: Offline Thanks Meter: 474	can please anyone add an done jumper pic???

09-11-2011, 21:35	#45 (permalink)
ebu mohammed-emin No Life Poster Join Date: Apr 2006 Location: The Arrivals Posts: 1,437 Member: 263993 Status: Offline Sonork: 100.1612432 Thanks Meter: 173	look good ! any one test it?