FuriousGold Successfully Unlocked / Repaired / Flashed Phones !!!

[mtb116]

ZTE Blade A5 2019-t

Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek PreLoader USB VCOM (Android) (COM10))
Preparing to start flash mode;
Preparing to open COM10
Connecting;
Downloading DA;
Initializing;
Rid: 5dc292a9bda27b3379a8cbc48d8d9ecf
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6761 [CA01, 200, 6761, 00]
HW_STORAGE_EMMC: 0x44030188 0x36314439 0xDF603847 0x65665632 [SIZE=0x39DC00000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x105800000 SIZE: 0x293CFBE00



Searching data;

Phone unlocked; Remove battery and cable;

Time needed - 00:00:00

Log file saved to: LOG_31_10_2019_11_48_32.txt

[-=P.F.U=-]

Software engine version: 1.0.0.10880
Searching phone ...

MODEL : QCOM SERIES 51
COMPILED DATE : Nov 12 2018 01:56:00
RELEASE DATE : May 10 2017 19:00:00
FIRMWARE INFO : MPSS.JO.3.0-00291-8909_GEN_PACK-1.97872.1.98558.1
IMEI : 35224909522893-5
BLUETOOTH ADDR : 00 00 00 00 00 00

FIRMWARE: ZA_MR4_VDF_P809V51V1.0.0B01

close_event_report: OK;
close_log_report: OK;
close_message_report: OK;
closing_com_port: OK;
Starting the backup process;
connect_server: OK;
backup in progress: OK;
Backup saved to: E:\Software'\FG\Pack 5\QCOM_SMART_TOOL_v1.0.0.10880\35224909522893_31_1 0_2019_11_01_21.bkp
switching_download_mode: OK;
closing_com_port: OK;
Preparing to open COM26
Connecting;
Loading;
Init;
Port opened;
Hello Received;
BOOT Loaded;
Getting config;
Getting mem info;
Found an eMMC memory 22CD
Looking for the interface;
Port found [ZTE Handset Diagnostic Interface(DFU) (COM28)]
connect_server: OK;
restore in progress: OK;
SIM_LOCK REMOVED !

Log file saved to: LOG_31_10_2019_11_04_43.txt

Time needed - 00:03:25

[rubelgsm]

Using library Brom_DLL_v5.1428.0
Searching phone;
(for some models keep SPACE or * (STAR) key pressed before inserting the cable)
Phone detected (MediaTek USB Port (COM38))
Preparing to start meta mode;
Meta mode entered;
Baseband Chip: MT6276
Sw version: 2045X_L5GR_V1.3_151120_CAM30_MCP128_64_FM_BT_IE_VD
Hw Version: HW01
Reading phone info;
IMEI: 355626-06-889684-7
Reading;
Reading security;
Done;
Checking;
Writing security;
Phone unlocked; Remove battery and cable;

Time needed - 00:00:23

Log file saved to: LOG_2_11_2019_15_12_36.txt

[..::GMSR::..]

Searching phone;
For an successful connection do the following:
1. Connect the phone powered off with the battery inside to the usb cable
Phone detected (@oem83.inf,%usbcomm_dl%;SPRD U2S Diag)
Preparing to sync;
Port opened [COM23];
Entering diagnostic mode;
Done;
Chip type: 0000:0000

Platform Version: MOCORTM_17C_W18.23.4_P9_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W18.23.4_P9
HW Version: sc7731e_modem
10-13-2018 10:47:12
Build number: sp7731e_1h20_celc-user 8.1.0 OPM2.171019.012 43120 release-keys
PHONE INFO:
BT ADDR: FF:FF:FF:FF:FF:FF
SW IMEI[0]: 867400-02-031661-2
SW IMEI[1]: 867400-02-031662-0
SW IMEI[2]: 867400-02-031663-8
SW IMEI[3]: 867400-02-031664-6

SIMLOCK FLAG: OFF

Starting factory reset;
Modem imei: 867400020316612
Working;
Done !

Log file saved to: LOG_4_11_2019_15_34_20.txt


Time needed - 00:00:14

[edisonsuen]

Vodafone Smart N10 VFD630 UNLOCKED with new security


Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off with volume down and up pressed to the usb cable]
Phone detected (MediaTek USB Port (COM7))
Preparing to start flash mode;
Preparing to open COM7
Connecting;
Downloading DA;
Initializing;
Rid: 09be7fa1101be74b06b9c780f51ba2df
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6761 [CA01, 200, 6761, 00]
HW_STORAGE_EMMC: 0x51000115 0x4D333645 0x10610342 0xD9565CF2 [SIZE=0x3A4A00000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x132800000 SIZE: 0x26DAFBE00



Searching data;

Phone unlocked; Remove battery and cable;

Time needed - 00:00:01

Log file saved to: LOG_5_11_2019_20_22_16.txt

[el_venga]

Phone detected (MediaTek PreLoader USB VCOM Port (COM84))
Preparing to start meta mode;
Searching for debug port; (be sure drivers from support were installed)
Meta mode entered;
Baseband Chip: MT6739
Sw version:
Hw Version: ALTICE_S32_DS_O_T_L_V01.4_190528_MP
Baseband Chip: MT6739
Sw version: MOLY.LR12A.R2.MP.V74.15
Hw Version: TK_MD_BASIC_HW
Reading phone info;
IMEI 1: 354496-10-xxxxxx-x
IMEI 2: 354496-10-xxxxxx-x
Loading config;
Done;
Working;
Unlocking;
Unlocking SIM2;

Phone unlocked; Remove battery and cable;

Time needed - 00:00:26

[djmurod86]

Software engine version: 1.0.0.10922
Searching phone ...

MODEL : QCOM SERIES 48
COMPILED DATE : Jun 2 2016 16:27:00
RELEASE DATE : May 13 2016 15:00:00
FIRMWARE INFO : MPSS.JO.1.1.c1-00038-8909_GEN_PACK-1.55671.1.56152.1
IMEI : 8696xxxxxxxxxxx
BLUETOOTH ADDR : 00 00 00 00 00 00

FIRMWARE: P890A09V1.0.0B15

close_event_report: OK;
close_log_report: OK;
close_message_report: OK;
closing_com_port: OK;
Starting the backup process;
connect_server: OK;
backup in progress: OK;
Backup saved to: C:\Users\Samir\Desktop\QCOM_SMART_TOOL_v1.0.0.1092 2\86964xxxxxxx_7_11_2019_11_49_40.bkp
switching_download_mode: OK;
closing_com_port: OK;
Preparing to open COM206
Connecting;
Loading;
Init;
Port opened;
Hello Received;
BOOT Loaded;
Getting config;
Getting mem info;
Found an eMMC memory 22CD
Looking for the interface;
Port found [ZTE Mobile Connect Diagnostics Port (COM226)]
connect_server: OK;
restore in progress: OK;
SIM_LOCK REMOVED !

[unlockmachine44]

huawei dub-lx1 y7 2019 frp remove done
thanks furious team

Connect the phone powered off with both volume down and up pressed or connect the phone powered off and leave it connected to the usb till it shows the battery/charging screen ;
Phone detected (@oem8.inf,%qcomdevice90080%;Qualcomm HS-USB QDLoader 9008)
Preparing to start flash mode;
Preparing to open COM47
Connecting;
Loading;
Init;
Port opened;
MSM_ID: 0x0009A0E1
OEM_ID: 0x0015
MODEL_ID: 0x0065
PK_HASH: 6BC369511DA9CADB3A7AF61574F89DB385003D6241BDD1FF57 3DBA61BF6AE1196BC369511DA9CADB3A7AF61574F89DB38500 3D6241BDD1FF573DBA61BF6AE1196BC369511DA9CADB3A7AF6 1574F89DB385003D6241BDD1FF573DBA61BF6AE119
BOOT Loaded;
Getting config;
Getting mem info;
Found an eMMC memory, target id 8953
start_frp_reset: OK;
frp_reset: OK;

Log file saved to: LOG_9_11_2019_21_33_44.txt

Time needed - 00:00:13

[CHAUDHRAY ARSHAD]

HERE LOG

[AgicAga]

Sucesed remove demo 100%

Fly Captain Huawei Resurrector 0.0.0.40
user:6B064D04

Looking for a device in upgrade mode
COM134: Android Adapter PCUI (COM134)
COM135: DBAdapter Reserved Interface (COM135)

14.11.2019 21:13:10 Starting to write device in UPGRADE mode...
Device found: MUN0218921004310


Old slow algo NOT selected

14.11.2019 21:13:13 start to write update file
File to update: C:\Users\Unlocker\Downloads\Huawei Mate 20 HMA-L29 Hima-L29CA HW EU 9.0.0.122(C432E10R1P16) Firmware 9.0.0 r3 EMUI9.0.0 05015LAX\Software\dload\update_sd_base\UPDATE.APP
File size: 6.700.747.296 bytes
Current version(BASE_VER): HMA-LGRP2-OVS 9.0.0.120

Process identifier:4807204

Validating file...
Detecting port...
Preparing to write...
Writing file 1 of 48: SHA256RSA...OK
Writing file 2 of 48: CRC...OK
Writing file 3 of 48: BASE_VERLIST...OK
Writing file 4 of 48: BASE_VER...OK
Writing file 5 of 48: PACKAGE_TYPE...OK
Writing file 6 of 48: HISIUFS_GPT...OK
Writing file 7 of 48: XLOADER...OK
Writing file 8 of 48: XLOADER_ES...OK
Writing file 9 of 48: FASTBOOT...OK
Writing file 10 of 48: DTS...OK
Writing file 11 of 48: DTO...OK
Writing file 12 of 48: VECTOR...OK
Writing file 13 of 48: FW_LPM3...OK
Writing file 14 of 48: FW_LPM3_ES...OK
Writing file 15 of 48: HHEE...OK
Writing file 16 of 48: VBMETA...OK
Writing file 17 of 48: TEEOS...OK
Writing file 18 of 48: TRUSTFIRMWARE...OK
Writing file 19 of 48: TRUSTFIRMWARE_ES...OK
Writing file 20 of 48: SENSORHUB...OK
Writing file 21 of 48: FW_HIFI...OK
Writing file 22 of 48: KERNEL...OK
Writing file 23 of 48: MODEMNVM_UPDATE...OK
Writing file 24 of 48: MODEMNVM_CUST...OK
Writing file 25 of 48: MODEM_DRIVER_A...OK
Writing file 26 of 48: RECOVERY_RAMDISK...OK
Writing file 27 of 48: RECOVERY_VENDOR...OK
Writing file 28 of 48: RECOVERY_VBMETA...OK
Writing file 29 of 48: ERECOVERY_KERNEL...OK
Writing file 30 of 48: ERECOVERY_RAMDISK...OK
Writing file 31 of 48: ERECOVERY_VENDOR...OK
Writing file 32 of 48: ERECOVERY_VBMETA...OK
Writing file 33 of 48: ENG_VENDOR...OK
Writing file 34 of 48: ENG_SYSTEM...OK
Writing file 35 of 48: HDCP...OK
Writing file 36 of 48: CACHE...OK
Writing file 37 of 48: SYSTEM...OK
Writing file 38 of 48: CUST...OK
Writing file 39 of 48: ISP_FIRMWARE...OK
Writing file 40 of 48: ISP_FIRMWARE_ES...OK
Writing file 41 of 48: MODEM_FW...OK
Writing file 42 of 48: HISEE_IMG...OK
Writing file 43 of 48: HISEE_IMG_ES...OK
Writing file 44 of 48: VENDOR...OK
Writing file 45 of 48: ODM...OK
Writing file 46 of 48: PRODUCT...OK
Writing file 47 of 48: USERDATA...OK
Writing file 48 of 48: UFSFW...OK
Software written

14.11.2019 21:30:06 start to update cust file
File to update: C:\Users\Unlocker\Downloads\Huawei Mate 20 HMA-L29 Hima-L29CA HW EU 9.0.0.122(C432E10R1P16) Firmware 9.0.0 r3 EMUI9.0.0 05015LAX\Software\dload\update_sd_cust_HMA-L29_hw_eu\UPDATE.APP
File size: 20.849.692 bytes
Current version(CUST_VER): HMA_Global-CUST 9.0.0(C999)

Process identifier:4807215

Validating file...
Detecting port...
Preparing to write...
Writing file 1 of 7: SHA256RSA...OK
Writing file 2 of 7: CRC...OK
Writing file 3 of 7: CUST_VERLIST...OK
Writing file 4 of 7: CUST_VER...OK
Writing file 5 of 7: PACKAGE_TYPE...OK
Writing file 6 of 7: PTABLE_CUST...OK
Writing file 7 of 7: VERSION...OK
Software written
14.11.2019 21:30:21 Writing device finished OK

[Unlocker AL]

Alcatel 5047U FRP removed ok

[kushol]

alcatel 5053Y Unlock Done Furious Gold

Connect the phone powered off with both volume down and up pressed or connect the phone powered off and leave it connected to the usb till it shows the battery/charging screen ;
Phone detected (@oem1.inf,%qcomdevice90080%;Qualcomm HS-USB QDLoader 9008)
Preparing to start flash mode;
Preparing to open COM888
Connecting;
Loading;
Init;
Port opened;
Hello Received;
BOOT Loaded;
Getting config;
Getting mem info;
Found an eMMC memory size 29.1 GB, target id 8937

IMEI: 35329910048549-0
PTH: 02
PTS: H1Y
PROV_ID: 5053Y-2BMWIE1
SBTADDR: 88:9E:33:E5:6B:2B
SWIFIADDR: 88:9E:33:E3:96:56
HS_PN: SAA2DS10G13C
SSN: HBLC02BOIMC00K5

Work id: 22021984
Done;
Stype: 00000001
SECURITY: X3H0CW00CX00 Size: 00000400
Backup saved to: 35329910048549-0
Unlocking;
SIM_LOCK REMOVED !
FRP has been Reset Successfully;
Erase Setup Done;
Erase Done;
Erase Done;



2dn phone

Connect the phone powered off with both volume down and up pressed or connect the phone powered off and leave it connected to the usb till it shows the battery/charging screen ;
Phone detected (@oem1.inf,%qcomdevice90080%;Qualcomm HS-USB QDLoader 9008)
Preparing to start flash mode;
Preparing to open COM888
Connecting;
Loading;
Init;
Port opened;
Hello Received;
BOOT Loaded;
Getting config;
Getting mem info;
Found an eMMC memory size 29.1 GB, target id 8937

IMEI: 35329910049212-4
PTH: 02
PTS: H1Y
PROV_ID: 5053Y-2BMWIE1
SBTADDR: 88:9E:3301:42
SWIFIADDR: 88:9E:333:91:21
HS_PN: SAA2DS10G13C
SSN: HBLC02BN7NC006Y

Work id: 22021984
Done;
Stype: 00000001
SECURITY: X3H0CW00CX00 Size: 00000400
Backup saved to: 35329910049212-4
Unlocking;
SIM_LOCK REMOVED !
FRP has been Reset Successfully;
Erase Setup Done;
Erase Done;
Erase Done;
FRPEx Done;

[CHEZRACHID]

just select accent nubia33 new and choose what you wanna do :



Phone detected (@oem219.inf,%usbcomm_dl%;SPRD U2S Diag)
Preparing to sync;
Port opened [COM5];
Mobile type: SPRD3
Connected;
Starting;
FDL sent;
Syncing;
Loader version: Spreadtrum Boot Block version 1.2
Starting FDL2;
FDL2 sent;
Chip type: 6562:0001
Starting auth;
HW IMEI : 000000-00-000000-0

Memory [CS0]: 00EF:0040:0016 - SIZE : 00400000 [000071C52699CE26:0000]
Reading phone info;
PHONE INFO: NONE
BT ADDR: 79:F7:20:68:06:00
SW IMEI[0]: 353728-xxxxxxxxxxx
SW IMEI[1]: 353xxxxxxxxxxxxxxx
SW IMEI[2]: 358570-01-xxxxxxxx
SW IMEI[3]: 910575-60-1xxxxxxx

SIMLOCK FLAG: OFF
FIXED NV BASE: 103A8000
Searching fs start and end addr;
Formatting 103B0000-10400000;
Starting format;
Formatted;
Done;

Remove battery and cable;

Log file saved to: LOG_17_11_2019_19_47_48.txt


Time needed - 00:01:20

[kprashant]

Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off with volume down pressed to the usb cable]
Phone detected (MTK USB Port (COM39))
Preparing to start flash mode;
Preparing to open COM39
Requesting authorization;
Connecting;
Downloading DA;
Initializing;
Rid: bd09c4beadbacb076534b266cdd27d98
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (MediaTek DA USB VCOM (Android))
TRYING TO OPEN COM58;
DEVICE INFO:
BB CHIP: MT6738 [CB00, 01, 6738, 00]
HW_STORAGE_EMMC: 0x51000115 0x4D333158 0xF8280742 0x33B418D6 [SIZE=0x748800000]
IMEI1 [OTP 0001]: 014976-00-445687-2
IMEI2 [OTP 0001]: 000000-00-000000-0
PROVIDER: 5049W-2ATBUS1
USRDATA INFO: 0x120000000 SIZE: 0x6240FBE00



Searching data;
Checking server support license;
Bruteforcing ... relax ;-)
Buteforce took 00:00:00
Checking data integrity;
Data integrity: OK;
SIM_LOCK: ENABLED
Rebuilding security;

Phone unlocked; Remove battery and cable;

Time needed - 00:00:05

Log file saved to: LOG_18_11_2019_18_43_08.txt

[theboy]

Looking for a device in force upgrade mode
Device detected:
COM23: HUAWEI USB COM 1.0 (COM23)
18-11-2019 13:00:37 Starting to write device in FASTBOOT mode...
File to update: C:\Users\Tek4life\Desktop\p20 lite\ANE-Downgrade-Board-A039-8.0.0.fcff
Device detected:
COM23: HUAWEI USB COM 1.0 (COM23)

Looking for a device in fastboot mode
Device found: 89U4C18A16000086


Getting IMEI...
Getting build number...
Getting model ...
Getting battery state...
Getting backdoor info...
Getting lock state info...
Getting lock boot info...

SN:89U4C18A16000086
IMEI:867440040964876

IMEI1:000000000000000

MEID:00000000000000
Build number: :ANE-LX1 9.1.0.228(C432E6R1P7)
Model: ANE-LX1
Battery state: 0
OEM lock state info:
FB LockState: UNLOCKED
USER LockState: LOCKED
OEM get bootinfo:
unlocked


Process identifier:4813489


Erasing ver .. .

Writing huawei_crc_check partition
HUAWEI_CRC_CHECK partition update ...OK

Writing ptable partition
PTABLE partition update ...OK

Writing huawei_crc_check partition
HUAWEI_CRC_CHECK partition update ...OK

Writing xloader partition
XLOADER partition update ...OK

Writing huawei_crc_check partition
HUAWEI_CRC_CHECK partition update ...OK

Writing fastboot partition
FASTBOOT partition update ...OK

Writing huawei_crc_check partition
HUAWEI_CRC_CHECK partition update ...OK

Writing kernel partition
KERNEL partition update ...OK

Writing huawei_crc_check partition
HUAWEI_CRC_CHECK partition update ...OK

Writing ramdisk partition
RAMDISK partition update ...OK

Writing huawei_crc_check partition
HUAWEI_CRC_CHECK partition update ...OK

Writing vbmeta partition
VBMETA partition update ...OK

Writing huawei_crc_check partition
HUAWEI_CRC_CHECK partition update ...OK

Writing odm partition
ODM partition update ...OK

Writing huawei_crc_check partition
HUAWEI_CRC_CHECK partition update ...OK

Writing recovery_ramdisk partition
RECOVERY_RAMDISK partition update ...OK

Writing huawei_crc_check partition
HUAWEI_CRC_CHECK partition update ...OK

Writing recovery_vendor partition
RECOVERY_VENDOR partition update ...OK

Writing huawei_crc_check partition
HUAWEI_CRC_CHECK partition update ...OK

Writing recovery_vbmeta partition
RECOVERY_VBMETA partition update ...OK

Erasing cust partition
Partition cust erased

Erasing misc partition
Partition misc erased

Writing huawei_crc_check partition
HUAWEI_CRC_CHECK partition update ...OK

Erasing cache partition
Partition cache erased
Writing cache partition
CACHE partition update ...OK

Writing huawei_crc_check partition
HUAWEI_CRC_CHECK partition update ...OK

Writing fw_lpm3 partition
FW_LPM3 partition update ...OK

Writing huawei_crc_check partition
HUAWEI_CRC_CHECK partition update ...OK

Writing fw_hifi partition
FW_HIFI partition update ...OK

Writing huawei_crc_check partition
HUAWEI_CRC_CHECK partition update ...OK

Writing teeos partition
TEEOS partition update ...OK

Writing huawei_crc_check partition
HUAWEI_CRC_CHECK partition update ...OK

Writing trustfirmware partition
TRUSTFIRMWARE partition update ...OK

Writing huawei_crc_check partition
HUAWEI_CRC_CHECK partition update ...OK

Writing sensorhub partition
SENSORHUB partition update ...OK

Writing huawei_crc_check partition
HUAWEI_CRC_CHECK partition update ...OK

Writing dts partition
DTS partition update ...OK

Writing huawei_crc_check partition
HUAWEI_CRC_CHECK partition update ...OK

Writing modemnvm_update partition
MODEMNVM_UPDATE partition update ...OK

Writing huawei_crc_check partition
HUAWEI_CRC_CHECK partition update ...OK

Writing modem_fw partition
MODEM_FW partition update ...OK

Writing huawei_crc_check partition
HUAWEI_CRC_CHECK partition update ...OK

Writing system partition
sending sparse file 413714128 bytes
Waiting for answer...
send sparse file OK
sending sparse file 471379936 bytes
Waiting for answer...
send sparse file OK
sending sparse file 463200008 bytes
Waiting for answer...
send sparse file OK
sending sparse file 77705316 bytes
Waiting for answer...
send sparse file OK
SYSTEM partition update ...OK

Writing huawei_crc_check partition
HUAWEI_CRC_CHECK partition update ...OK

Writing vendor partition
sending sparse file 459899448 bytes
Waiting for answer...
send sparse file OK
sending sparse file 146912472 bytes
Waiting for answer...
send sparse file OK
VENDOR partition update ...OK

Erasing product partition
Partition product erased

Writing huawei_crc_check partition
HUAWEI_CRC_CHECK partition update ...OK

Writing product partition
PRODUCT partition update ...OK

Erasing version partition
Partition version erased

Writing huawei_crc_check partition
HUAWEI_CRC_CHECK partition update ...OK

Writing version partition
VERSION partition update ...OK

Erasing userdata partition
Partition userdata erased

Writing huawei_crc_check partition
HUAWEI_CRC_CHECK partition update ...OK

Erasing userdata partition
Partition userdata erased
Writing userdata partition
USERDATA partition update ...OK

Writing huawei_crc_check partition
HUAWEI_CRC_CHECK partition update ...OK

Writing splash2 partition
SPLASH2 partition update ...OK

Erasing bootfail_info partition
Partition bootfail_info erased

Erasing dfx partition
Partition dfx erased

Erasing rrecord partition
Partition rrecord erased

Waiting for fastboot device...

USB Device REMOVAL
Type: @oem376.inf,%singleadbinterface%;Android ADB Interface
VidPid: VID_18D1&PID_D00D
Instance id: 89U4C18A16000086


USB Device INSERTION
Type: @oem376.inf,%singleadbinterface%;Android ADB Interface
VidPid: VID_18D1&PID_D00D
Instance id: 89U4C18A16000086

Device found: 89U4C18A16000086


Waiting for OEM hwdog certify set 0 command ...
Waiting for OEM hwdog certify set 0 command ...OK

Waiting for OEM oeminfoerase-vendorcountry command ...
Waiting for OEM oeminfoerase-vendorcountry command ...OK

Waiting for OEM oeminfoerase-devicemodel command ...
Waiting for OEM oeminfoerase-devicemodel command ...OK

Waiting for OEM oeminfoerase-ver command ...
Waiting for OEM oeminfoerase-ver command ...OK

Waiting for OEM oeminfoerase-single_sim command ...
Waiting for OEM oeminfoerase-single_sim command ...OK

USB Device REMOVAL
Type: @oem376.inf,%singleadbinterface%;Android ADB Interface
VidPid: VID_18D1&PID_D00D
Instance id: 89U4C18A16000086

Software written
18-11-2019 13:15:19 Writing device finished OK


Downgrade ok with help of Daniel .:hack3r2k:.
Active dual sim in phone
Them flash back android 9

Fly Captain Huawei Resurrector 0.0.0.40
user:6B074D2F

Looking for a device in upgrade mode
COM227: Android Adapter PCUI (COM227)
COM228: DBAdapter Reserved Interface (COM228)

18-11-2019 13:29:14 Starting to write device in UPGRADE mode...
Device found: 89U4C18A16000086


Old slow algo NOT selected

18-11-2019 13:29:16 start to write update file
File to update: C:\Users\Tek4life\Desktop\p20 lite\Anne-L01 9.1.0.132(C432E5R1P7T8)_Firmware_9.0.0_r3.cfs

Process identifier:4813544

Validating file...
Detecting port...
Preparing to write...

Extracting partition SHA256RSA...
Writing partition: SHA256RSA...OK

Extracting partition CRC...
Writing partition: CRC...OK

Extracting partition CURVER...
Writing partition: CURVER...OK

Extracting partition VERLIST...
Writing partition: VERLIST...OK

Extracting partition PACKAGE_TYPE...
Writing partition: PACKAGE_TYPE...OK

Extracting partition HISIUFS_GPT...
Writing partition: HISIUFS_GPT...OK

Extracting partition XLOADER...
Writing partition: XLOADER...OK

Extracting partition FW_LPM3...
Writing partition: FW_LPM3...OK

Extracting partition FASTBOOT...
Writing partition: FASTBOOT...OK

Extracting partition VBMETA...
Writing partition: VBMETA...OK

Extracting partition MODEMNVM_UPDATE...
Writing partition: MODEMNVM_UPDATE...OK

Extracting partition TEEOS...
Writing partition: TEEOS...OK

Extracting partition TRUSTFIRMWARE...
Writing partition: TRUSTFIRMWARE...OK

Extracting partition SENSORHUB...
Writing partition: SENSORHUB...OK

Extracting partition FW_HIFI...
Writing partition: FW_HIFI...OK

Extracting partition DTS...
Writing partition: DTS...OK

Extracting partition KERNEL...
Writing partition: KERNEL...OK

Extracting partition RECOVERY_RAMDISK...
Writing partition: RECOVERY_RAMDISK...OK

Extracting partition RECOVERY_VENDOR...
Writing partition: RECOVERY_VENDOR...OK

Extracting partition RECOVERY_VBMETA...
Writing partition: RECOVERY_VBMETA...OK

Extracting partition ENG_VENDOR...
Writing partition: ENG_VENDOR...OK

Extracting partition ENG_SYSTEM...
Writing partition: ENG_SYSTEM...OK

Extracting partition CACHE...
Writing partition: CACHE...OK

Extracting partition SYSTEM...
Writing partition: SYSTEM...OK

Extracting partition CUST...
Writing partition: CUST...OK

Extracting partition MODEM_FW...
Writing partition: MODEM_FW...OK

Extracting partition VENDOR...
Writing partition: VENDOR...OK

Extracting partition VERSION...
Writing partition: VERSION...OK

Extracting partition ODM...
Writing partition: ODM...OK

Extracting partition PRODUCT...
Writing partition: PRODUCT...OK

Extracting partition PRELOAD...
Writing partition: PRELOAD...OK

Extracting partition ERECOVERY_KERNEL...
Writing partition: ERECOVERY_KERNEL...OK

Extracting partition ERECOVERY_RAMDISK...
Writing partition: ERECOVERY_RAMDISK...OK

Extracting partition ERECOVERY_VENDOR...
Writing partition: ERECOVERY_VENDOR...OK

Extracting partition ERECOVERY_VBMETA...
Writing partition: ERECOVERY_VBMETA...OK

Extracting partition USERDATA...
Writing partition: USERDATA...OK

Extracting partition PATCH...
Writing partition: PATCH...OK
Software written

18-11-2019 13:42:52 start to update cust file
File to update: C:\Users\Tek4life\Desktop\p20 lite\update_ANE-L01_hw_eu.cfs

Process identifier:4813565

Validating file...
Detecting port...
Preparing to write...

Extracting partition SHA256RSA...
Writing partition: SHA256RSA...OK

Extracting partition CRC...
Writing partition: CRC...OK

Extracting partition CURVER...
Writing partition: CURVER...OK

Extracting partition VERLIST...
Writing partition: VERLIST...OK

Extracting partition PACKAGE_TYPE...
Writing partition: PACKAGE_TYPE...OK

Extracting partition VERSION...
Writing partition: VERSION...OK