FRP in Q Snapdragon 665, MTK MT6771T posibble ? - GSM-Forum

at-kom · 01-05-2021, 07:40

Hi brothers

I need to reset frp in mobile CHIP :

CHIP : Qualcomm Snapdragon 665
GPU: Adreno 610

and

CHIP : MediaTek Helio P70 MT6771T
GPU: ARM Mali-G72

any module in infinity box can do that ?

at-kom · 01-05-2021, 14:55

any one do this with cm2 QLM from infinity box module ?

Yusuf Lawal · 01-05-2021, 23:02

Read info with Infinity-Box CM2 module and post log ]

at-kom · 01-11-2021, 14:05

Quote:

Originally Posted by Yusuf Lawal

Read info with Infinity-Box CM2 module and post log ]

Read in Recovery mode ?

at-kom · 01-11-2021, 17:03

Use, Flash mode (VOL+ and VOL- ) connect to PC and Use MTK Module : Oppo F5 andhere is log :

Operation : Identify [ v2.16 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM18)
MODE : BOOTROM
PORT : 18
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Sylvia
TYPE : MODERN RAPHAEL
BROM : MEID : 3A0A1E81F0FC393F1B95A56B4955CF72
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : Oppo : F5 | Manual : Disabled
BROM : SOCID : 35A9D79C82DCDCB867747D1658DB01026894D509B114424C57 3151A4AFDC95BF
BROM : ARB : ACTIVE : LOG : F0: 102B 0000 F3: 1001 0000 [0200] F3: 1001 0000 F7: 0000 0000 V0: 0000 0000 [0001]
BROM : SLA

BROM : Selected Auth/Cert not accepted by device!
>>> Check previous message for more info!

BUT I have problem with identify another phone : Qualcomm Snapdragon 665

at-kom · 01-11-2021, 17:03

Use, Flash mode (VOL+ and VOL- ) connect to PC and Use MTK Module : Oppo F5 andhere is log :

Operation : Identify [ v2.16 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM18)
MODE : BOOTROM
PORT : 18
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Sylvia
TYPE : MODERN RAPHAEL
BROM : MEID : 3A0A1E81F0FC393F1B95A56B4955CF72
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : Oppo : F5 | Manual : Disabled
BROM : SOCID : 35A9D79C82DCDCB867747D1658DB01026894D509B114424C57 3151A4AFDC95BF
BROM : ARB : ACTIVE : LOG : F0: 102B 0000 F3: 1001 0000 [0200] F3: 1001 0000 F7: 0000 0000 V0: 0000 0000 [0001]
BROM : SLA

BROM : Selected Auth/Cert not accepted by device!
>>> Check previous message for more info!

BUT I have problem with identify another phone : Qualcomm Snapdragon 665

Franky_36 · 01-11-2021, 20:12

Quote:

Originally Posted by at-kom

Use, Flash mode (VOL+ and VOL- ) connect to PC and Use MTK Module : Oppo F5 andhere is log :

Operation : Identify [ v2.16 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM18)
MODE : BOOTROM
PORT : 18
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Sylvia
TYPE : MODERN RAPHAEL
BROM : MEID : 3A0A1E81F0FC393F1B95A56B4955CF72
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : Oppo : F5 | Manual : Disabled
BROM : SOCID : 35A9D79C82DCDCB867747D1658DB01026894D509B114424C57 3151A4AFDC95BF
BROM : ARB : ACTIVE : LOG : F0: 102B 0000 F3: 1001 0000 [0200] F3: 1001 0000 F7: 0000 0000 V0: 0000 0000 [0001]
BROM : SLA

BROM : Selected Auth/Cert not accepted by device!
>>> Check previous message for more info!

BUT I have problem with identify another phone : Qualcomm Snapdragon 665

Hi, in the mtk module you need custom da file, auth.file, preloader.bin and depending on the security of the mobile.
With the qualcomm idem theme, you need a custom loader and it will surely give you an error, because you need authorization to the server.

It would also be very helpful if you indicate which phones they are, the more information the users provide, the better for others, if you do not comply with the basic rules of the forum and the section in question they will not answer.

BR

JayDi · 01-12-2021, 11:13

665 not.
MT6771 - what model exactly you have?

at-kom · 01-12-2021, 11:38

Quote:

Originally Posted by JayDi

665 not.
MT6771 - what model exactly you have?

It`s OPPO A91 Global

JayDi · 01-12-2021, 11:42

Oppo in almost every device line uses own security keypairs.
It will not work with internal loaders.
Seems as look for authorised service or isp/emmc direct.

at-kom · 01-12-2021, 11:48

Quote:

Originally Posted by Franky_36

Hi, in the mtk module you need custom da file, auth.file, preloader.bin and depending on the security of the mobile.
With the qualcomm idem theme, you need a custom loader and it will surely give you an error, because you need authorization to the server.

It would also be very helpful if you indicate which phones they are, the more information the users provide, the better for others, if you do not comply with the basic rules of the forum and the section in question they will not answer.

BR

This is two OPPO models

1.
OPPO A52 (PDAM10, CPH2069)
Qualcomm Snapdragon 665 GPU: Adreno 610

2.
OPPO A91 Global (CPH2001, CPH2021)
MediaTek Helio P70 MT6771T GPU: ARM Mali-G72

So, what I need to hard reset/reset frp in this phones via Infinity Box ?

at-kom · 01-12-2021, 12:46

Quote:

Originally Posted by JayDi

Oppo in almost every device line uses own security keypairs.
It will not work with internal loaders.
Seems as look for authorised service or isp/emmc direct.

You write about boxes with EMMC/ISP module (JTAG) ?

JayDi · 01-12-2021, 12:59

Yes, about them. USB cable here not enough yet.

lalit bisht · 01-13-2021, 08:01

Quote:

Originally Posted by JayDi

Yes, about them. USB cable here not enough yet.

any plan to launch ur own ufs emmc tool?

rebainoor · 01-13-2021, 21:51

Quote:

Originally Posted by JayDi

Oppo in almost every device line uses own security keypairs.
It will not work with internal loaders.
Seems as look for authorised service or isp/emmc direct.

Oppo use *.cert file with *.auth

Code:

.01/12/21 14:01:16.076 BROM_DLL[13792][8732]: AUTH_GetInfo(): AUTH_HANDLE->rwlock: READ_UNLOCK. (rwlock.cpp:423)
01/12/21 14:01:16.076 BROM_DLL[13792][8732]: SCERT_GetInfo(): SCERT_HANDLE->rwlock: READ_LOCK ... (rwlock.cpp:407)
01/12/21 14:01:16.076 BROM_DLL[13792][8732]: ERROR: SCERT_GetInfo(): <ERR_CHECKPOINT>[300][error][5007]</ERR_CHECKPOINT> [S_FTHND_FILE_IS_NOT_LOADED_YET] (flashtool_handle.cpp:2441)

01-05-2021, 07:40	#1 (permalink)
at-kom No Life Poster Join Date: Mar 2007 Location: PL Age: 44 Posts: 580 Member: 477842 Status: Offline Thanks Meter: 80	FRP in Q Snapdragon 665, MTK MT6771T posibble ? Hi brothers I need to reset frp in mobile CHIP : CHIP : Qualcomm Snapdragon 665 GPU: Adreno 610 and CHIP : MediaTek Helio P70 MT6771T GPU: ARM Mali-G72 any module in infinity box can do that ?

01-05-2021, 14:55	#2 (permalink)
at-kom No Life Poster Join Date: Mar 2007 Location: PL Age: 44 Posts: 580 Member: 477842 Status: Offline Thanks Meter: 80	any one do this with cm2 QLM from infinity box module ?

01-05-2021, 23:02	#3 (permalink)
Yusuf Lawal No Life Poster Join Date: Oct 2011 Location: Nigeria Posts: 6,593 Member: 1677653 Status: Offline Thanks Meter: 2,769	Read info with Infinity-Box CM2 module and post log ]

01-11-2021, 17:03	#5 (permalink)
at-kom No Life Poster Join Date: Mar 2007 Location: PL Age: 44 Posts: 580 Member: 477842 Status: Offline Thanks Meter: 80	Use, Flash mode (VOL+ and VOL- ) connect to PC and Use MTK Module : Oppo F5 andhere is log : Operation : Identify [ v2.16 ] Mode : FLASH 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port (COM18) MODE : BOOTROM PORT : 18 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 CODE : Sylvia TYPE : MODERN RAPHAEL BROM : MEID : 3A0A1E81F0FC393F1B95A56B4955CF72 BROM : SecLevel : 0x000000E5 BROM : SecMode : SBC+SDA+EXT BROM : BROM\|BL : 0x05\|0xFE BROM : BOOTROM MODE : Oppo : F5 \| Manual : Disabled BROM : SOCID : 35A9D79C82DCDCB867747D1658DB01026894D509B114424C57 3151A4AFDC95BF BROM : ARB : ACTIVE : LOG : F0: 102B 0000 F3: 1001 0000 [0200] F3: 1001 0000 F7: 0000 0000 V0: 0000 0000 [0001] BROM : SLA BROM : Selected Auth/Cert not accepted by device! >>> Check previous message for more info! BUT I have problem with identify another phone : Qualcomm Snapdragon 665

01-11-2021, 17:03	#6 (permalink)
at-kom No Life Poster Join Date: Mar 2007 Location: PL Age: 44 Posts: 580 Member: 477842 Status: Offline Thanks Meter: 80	Use, Flash mode (VOL+ and VOL- ) connect to PC and Use MTK Module : Oppo F5 andhere is log : Operation : Identify [ v2.16 ] Mode : FLASH 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port (COM18) MODE : BOOTROM PORT : 18 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 CODE : Sylvia TYPE : MODERN RAPHAEL BROM : MEID : 3A0A1E81F0FC393F1B95A56B4955CF72 BROM : SecLevel : 0x000000E5 BROM : SecMode : SBC+SDA+EXT BROM : BROM\|BL : 0x05\|0xFE BROM : BOOTROM MODE : Oppo : F5 \| Manual : Disabled BROM : SOCID : 35A9D79C82DCDCB867747D1658DB01026894D509B114424C57 3151A4AFDC95BF BROM : ARB : ACTIVE : LOG : F0: 102B 0000 F3: 1001 0000 [0200] F3: 1001 0000 F7: 0000 0000 V0: 0000 0000 [0001] BROM : SLA BROM : Selected Auth/Cert not accepted by device! >>> Check previous message for more info! BUT I have problem with identify another phone : Qualcomm Snapdragon 665

01-12-2021, 11:13	#8 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	665 not. MT6771 - what model exactly you have?

01-12-2021, 11:42	#10 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	Oppo in almost every device line uses own security keypairs. It will not work with internal loaders. Seems as look for authorised service or isp/emmc direct.

01-12-2021, 12:59	#13 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	Yes, about them. USB cable here not enough yet.