Infinity Chinese Miracle-2 MTK/MediaTek v2.20 - Standalone MTK auth ON - NEW CPU - Page 8 - GSM-Forum

y8765 · 02-18-2021, 14:18

Quote:

Originally Posted by GODISTHEBEST

thank you for the attention
i am talking about MTK module so it is not the FP we talked about recently
any way thank you for the advice to check if the BKEY is the right one !
what is it "special da"
da is a abiriviation of something ?

Da its like the loader of the device. Kind of.
The Bast 2044 file, is like an AIO file that fits a lot of devices.

GODISTHEBEST · 02-18-2021, 18:40

Quote:

Originally Posted by y8765

Da its like the loader of the device. Kind of.
The Bast 2044 file, is like an AIO file that fits a lot of devices.

after some research i found that AIO FILE it is like ZEVEL files more common THE EXTANTION after opening in some unique software you can see the SHTUYOT that is reatten over there
any way, thank you for the KISHKUSHIM there are very understandable
i will do more research

y8765 · 02-18-2021, 23:08

Quote:

Originally Posted by GODISTHEBEST

after some research i found that AIO FILE it is like ZEVEL files more common THE EXTANTION after opening in some unique software you can see the SHTUYOT that is reatten over there
any way, thank you for the KISHKUSHIM there are very understandable
i will do more research

With this attitude and your "high" software skills, good luck in killing phones

And b.t.w. Disrespecting(cursing) in other languages is showing on your personality a lot...

GODISTHEBEST · 02-19-2021, 09:19

you know what !!!
you are right on everything
and i will be happy if you wont try to "help me" in my posts anymore
pls do that
BUT ....
i dont know what you talking about CURSING
as usual you trying to make me seen as a bad person infront of the supporter so YOU WILL HOLD ALL THE KNOWLADGE in this special phones area !
so pls have a nice life and ignore me and my post and pls do not "HELP ME"
AS in the end i am seen as an idiot by your help
GOOD LACK
BTW read well and see that i am blessing you not cursing

GODISTHEBEST · 02-19-2021, 09:27

and again as you can see from your post
"with you high softeware skil" you wrote it for what ? for ecouraging me ?
or to insult me infront of everyone?
and i am not recall that this furom is for programmer ? so i am learning here this is the porpuse of the forum !
so again pls do not HELP ME " just ijnore my post
i will be more then happy
and again *** BLESS YOU

YellowBoss · 02-21-2021, 13:48

To whom it may concern

Let me explain once again and finally: Infinity Team do not provide any kind of "lessons for beginners". It means people who want to work in mobile phone repair filed should learn something before start to make something.

Example: if you want to work as a Taxi driver you need (at least) the next things:
- driving skills
- driving licence
- yellow color car with "Taxi" word on board

Now you want to buy a car. Do you think car dealer will give you a "driving skills" and "sriving licence" as a free addon to car that you want to buy ?

Thank you friends for your kind understanding !
Team is always ready to help you but please as questions that have an answers !

GODISTHEBEST · 02-21-2021, 16:08

sorry PRODUCT SUPPORTER
pls tell me can i ask also from you to ignore my questions
i have understand that you together have done WORK in my country and dont want me to bypass it ! i have understand it !
i dont think that you have the right to silence me
i can ask question as any body else ( you can ignore them ) hopfully
and let other supporters and good pepole to help me
as stupid as my question will be !
as eveybody can see that i wrote to y8765 and you jumped in the middle
i did not talked to you
and eveybody knows that the infinity software is mircle to the with it simplicity
so you need to be proud that even (simple person like me ) using it and can do micrles with it !
any way if you one of the engeneers THANK YOU FOR THIS MIRCLE SOFTWARE

YellowBoss · 02-27-2021, 22:51

Quote:

Originally Posted by GODISTHEBEST

sorry PRODUCT SUPPORTER
pls tell me can i ask also from you to ignore my questions
i have understand that you together have done WORK in my country and dont want me to bypass it ! i have understand it !
i dont think that you have the right to silence me
i can ask question as any body else ( you can ignore them ) hopfully
and let other supporters and good pepole to help me
as stupid as my question will be !
as eveybody can see that i wrote to y8765 and you jumped in the middle
i did not talked to you
and eveybody knows that the infinity software is mircle to the with it simplicity
so you need to be proud that even (simple person like me ) using it and can do micrles with it !
any way if you one of the engeneers THANK YOU FOR THIS MIRCLE SOFTWARE

Sure you can write and ask here all what you want. And probably you will get an answers to some questions too.

Linksboy · 03-19-2021, 22:31

Thanks for the great job

awesonjude · 03-30-2021, 12:36

Good day friends,
Please I need Gionee S10 DA and AUTH files. CM2MT2 cannot flash due to lack of DA. I tried using S11 and S9 DA but it failed.

awesonjude · 03-30-2021, 12:40

Good day friends,
Please I need Gionee S10 DA and AUTH files. CM2MT2 cannot flash due to lack of DA. I tried using S11 and S9 DA but it failed.

kamal_singla · 03-30-2021, 14:06

Quote:

Originally Posted by awesonjude

Good day friends,
Please I need Gionee S10 DA and AUTH files. CM2MT2 cannot flash due to lack of DA. I tried using S11 and S9 DA but it failed.

please post complete logs to understand better
btw, try with tick sSLA base must be default 2044

awesonjude · 03-30-2021, 15:13

Here is the logs

I am trying to flash a full file. I tried using fastboot mode but bootloader is locked.
SP Flashtool is complaining of DA file also.
Card found : 33F22D11 , v0147
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.21

Load IDBase v21168 Ok!

Operation : Identify [ v2.21 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM10)
MODE : BOOTROM
PORT : 10
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6757 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
CODE : Kibo
TYPE : MODERN RAPHAEL
BROM : MEID : 5BA3DD78FD5E32D5385005A18AB8D4BD
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2044 | Manual : Disabled
BROM : SLA : Local Auth
BROM : SLA : Auth Started!

BROM : Selected Auth/Cert not accepted by device!
>>> Check previous message for more info!

Reconnect Power/Cable!

Thanks for your response.

awesonjude · 03-30-2021, 15:13

Here is the logs

I am trying to flash a full file. I tried using fastboot mode but bootloader is locked.
SP Flashtool is complaining of DA file also.
Card found : 33F22D11 , v0147
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.21

Load IDBase v21168 Ok!

Operation : Identify [ v2.21 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM10)
MODE : BOOTROM
PORT : 10
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6757 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
CODE : Kibo
TYPE : MODERN RAPHAEL
BROM : MEID : 5BA3DD78FD5E32D5385005A18AB8D4BD
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2044 | Manual : Disabled
BROM : SLA : Local Auth
BROM : SLA : Auth Started!

BROM : Selected Auth/Cert not accepted by device!
>>> Check previous message for more info!

Reconnect Power/Cable!

Thanks for your response.

kamal_singla · 03-30-2021, 15:19

Re install exe repeat procedure

03-30-2021, 12:40	#116 (permalink)
awesonjude Major Poster Join Date: Aug 2013 Posts: 44 Member: 2001634 Status: Offline Thanks Meter: 1	Gionee s10 da file Good day friends, Please I need Gionee S10 DA and AUTH files. CM2MT2 cannot flash due to lack of DA. I tried using S11 and S9 DA but it failed.

02-19-2021, 09:19	#109 (permalink)
GODISTHEBEST Freak Poster Join Date: Dec 2015 Age: 46 Posts: 417 Member: 2496790 Status: Offline Thanks Meter: 11	you know what !!! you are right on everything and i will be happy if you wont try to "help me" in my posts anymore pls do that BUT .... i dont know what you talking about CURSING as usual you trying to make me seen as a bad person infront of the supporter so YOU WILL HOLD ALL THE KNOWLADGE in this special phones area ! so pls have a nice life and ignore me and my post and pls do not "HELP ME" AS in the end i am seen as an idiot by your help GOOD LACK BTW read well and see that i am blessing you not cursing

02-19-2021, 09:27	#110 (permalink)
GODISTHEBEST Freak Poster Join Date: Dec 2015 Age: 46 Posts: 417 Member: 2496790 Status: Offline Thanks Meter: 11	and again as you can see from your post "with you high softeware skil" you wrote it for what ? for ecouraging me ? or to insult me infront of everyone? and i am not recall that this furom is for programmer ? so i am learning here this is the porpuse of the forum ! so again pls do not HELP ME " just ijnore my post i will be more then happy and again *** BLESS YOU

02-21-2021, 13:48	#111 (permalink)
YellowBoss Product Supporter Join Date: Jun 2009 Location: private Posts: 36,476 Member: 1043909 Status: Offline Thanks Meter: 60,926	To whom it may concern Let me explain once again and finally: Infinity Team do not provide any kind of "lessons for beginners". It means people who want to work in mobile phone repair filed should learn something before start to make something. Example: if you want to work as a Taxi driver you need (at least) the next things: - driving skills - driving licence - yellow color car with "Taxi" word on board Now you want to buy a car. Do you think car dealer will give you a "driving skills" and "sriving licence" as a free addon to car that you want to buy ? Thank you friends for your kind understanding ! Team is always ready to help you but please as questions that have an answers !

02-21-2021, 16:08	#112 (permalink)
GODISTHEBEST Freak Poster Join Date: Dec 2015 Age: 46 Posts: 417 Member: 2496790 Status: Offline Thanks Meter: 11	sorry PRODUCT SUPPORTER pls tell me can i ask also from you to ignore my questions i have understand that you together have done WORK in my country and dont want me to bypass it ! i have understand it ! i dont think that you have the right to silence me i can ask question as any body else ( you can ignore them ) hopfully and let other supporters and good pepole to help me as stupid as my question will be ! as eveybody can see that i wrote to y8765 and you jumped in the middle i did not talked to you and eveybody knows that the infinity software is mircle to the with it simplicity so you need to be proud that even (simple person like me ) using it and can do micrles with it ! any way if you one of the engeneers THANK YOU FOR THIS MIRCLE SOFTWARE

03-19-2021, 22:31	#114 (permalink)
Linksboy Junior Member Join Date: Nov 2017 Location: No 9A Abuja road d.s.c townshi Posts: 3 Member: 2777893 Status: Offline Sonork: LB Thanks Meter: 0	Thanks for the great job

03-30-2021, 12:36	#115 (permalink)
awesonjude Major Poster Join Date: Aug 2013 Posts: 44 Member: 2001634 Status: Offline Thanks Meter: 1	Good day friends, Please I need Gionee S10 DA and AUTH files. CM2MT2 cannot flash due to lack of DA. I tried using S11 and S9 DA but it failed.

03-30-2021, 15:13	#118 (permalink)
awesonjude Major Poster Join Date: Aug 2013 Posts: 44 Member: 2001634 Status: Offline Thanks Meter: 1	Here is the logs I am trying to flash a full file. I tried using fastboot mode but bootloader is locked. SP Flashtool is complaining of DA file also. Card found : 33F22D11 , v0147 Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.21 Load IDBase v21168 Ok! Operation : Identify [ v2.21 ] Mode : FLASH 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port_V1632 (COM10) MODE : BOOTROM PORT : 10 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6757 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001 CODE : Kibo TYPE : MODERN RAPHAEL BROM : MEID : 5BA3DD78FD5E32D5385005A18AB8D4BD BROM : SecLevel : 0x000000E5 BROM : SecMode : SBC+SDA+EXT BROM : BROM\|BL : 0x05\|0xFE BROM : BOOTROM MODE : 0_base : BASE_v2044 \| Manual : Disabled BROM : SLA : Local Auth BROM : SLA : Auth Started! BROM : Selected Auth/Cert not accepted by device! >>> Check previous message for more info! Reconnect Power/Cable! Thanks for your response.

03-30-2021, 15:13	#119 (permalink)
awesonjude Major Poster Join Date: Aug 2013 Posts: 44 Member: 2001634 Status: Offline Thanks Meter: 1	Here is the logs I am trying to flash a full file. I tried using fastboot mode but bootloader is locked. SP Flashtool is complaining of DA file also. Card found : 33F22D11 , v0147 Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.21 Load IDBase v21168 Ok! Operation : Identify [ v2.21 ] Mode : FLASH 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port_V1632 (COM10) MODE : BOOTROM PORT : 10 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6757 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001 CODE : Kibo TYPE : MODERN RAPHAEL BROM : MEID : 5BA3DD78FD5E32D5385005A18AB8D4BD BROM : SecLevel : 0x000000E5 BROM : SecMode : SBC+SDA+EXT BROM : BROM\|BL : 0x05\|0xFE BROM : BOOTROM MODE : 0_base : BASE_v2044 \| Manual : Disabled BROM : SLA : Local Auth BROM : SLA : Auth Started! BROM : Selected Auth/Cert not accepted by device! >>> Check previous message for more info! Reconnect Power/Cable! Thanks for your response.

03-30-2021, 15:19	#120 (permalink)
kamal_singla Product Supporter Join Date: Jun 2014 Location: India Posts: 5,063 Member: 2211790 Status: Offline Thanks Meter: 5,118	Re install exe repeat procedure