Infinity Chinese Miracle-2 QLM v1.10 - SD 808/MSM8992, more models and features

[YellowBoss]

Infinity Chinese Miracle-2 QLM v1.10 - SD 808/MSM8992, more models and features

*New CPU line activated:
SnapDragon 808: Generic, Xiaomi, Lenovo, Vivo and much other devices

Supported CPU List:
Qualcomm MSM 8210 (SnapDragon 200)
Qualcomm MSM 8212 (SnapDragon 200)
Qualcomm MSM 8610 (SnapDragon 200)
Qualcomm MSM 8612 (SnapDragon 200)
Qualcomm MSM 8226 (SnapDragon 400)
Qualcomm MSM 8626 (SnapDragon 400)
Qualcomm MSM 8926 (SnapDragon 400)
Qualcomm MSM 8228 (SnapDragon 400)
Qualcomm MSM 8628 (SnapDragon 400)
Qualcomm MSM 8928 (SnapDragon 400)
Qualcomm APQ 8009 (SnapDragon 210)
Qualcomm MSM 8209 (SnapDragon 210)
Qualcomm MSM 8909 (SnapDragon 210)
Qualcomm MSM 8916 (SnapDragon 410)
Qualcomm MSM 8917 (SnapDragon 425)
Qualcomm MSM 8929 (SnapDragon 415)
Qualcomm MSM 8936 (SnapDragon 610)
Qualcomm MSM 8937 (SnapDragon 430)
Qualcomm MSM 8939 (SnapDragon 615)
Qualcomm MSM 8974/A/AB (SnapDragon 801)
Qualcomm MSM 8952 (SnapDragon 617)
Qualcomm MSM 8953 (SnapDragon 625)
Qualcomm MSM 8956 (SnapDragon 650)
Qualcomm MSM 8976 (SnapDragon 652)
Qualcomm MSM 8992 (SnapDragon 808)
Qualcomm MSM 8994 (SnapDragon 810)

*Main
FH Protocol updated and more platform types supported
MSM8909: Updated support for wide range of new devices - Alcatel, CoolPad, Oppo etc.
MSM8916: Updated support for wide range of new devices - Alcatel, CoolPad etc.
MSM8936: Updated support for wide range of new devices - Alcatel, CoolPad, Oppo etc.
MSM8929: Updated support for range of new devices - CoolPad etc.
MSM8974: Updated support for wide range of new devices - OPO, Generic etc.
MSM8974: A and AB revisions of MSM8974 support fixed
MSM8976: Updated support for wide range of new devices ( Latest OPPO with "protected fw" included )
MSM8992: Support Generic, Xiaomi, Lenovo, Vivo and other devices
MSM8x2x: updated list of supported sub-types and more models supported


*MemoryTool
Ultimate tool for custom flashing, modding, forensic and others operations!
Allow work with device memory for:
> Read any memory Region
> Write any memory Region
> Erase any memory Region
> Partial/Customize Flashing
> Forensic
> Flash IC test

- New look
Memory view window can be customized ( size, postion etc. )
Expand/Collapse view - allow fastly open/close all partitions view
> MemoryTool moved to system menu -> Extra

- New features
Update State
> Update device memory info snapshot
Erase partitions
> Allow erase any partition on device
> Warning! During ERASE, WRITE operation MAKE sure about you know WHAT you do!
If you play with MSM boot (sbl/tz etc.) - and not have idea what to do - can get a S-EDL brick!

*New CPU support activated:
Qualcomm MSM8992 (Generic and Secure types)

Supported features:
> Identify
> Read Firmware ( Infinity )
> Write Firmware ( Infinity )
> Write Firmware ( Factory RAW )
> Read PatternLock ( Android 4.x/5.x )
> Format FileSystem
> Reset UserLocks
> Forensic (PhoneBook Extraction)
> Reset FRP ( Google Reset Protection )
> MemoryTool

*FW reader engine updated
New types supported
Brand-specific changes and improvements ( Coolpad, Lenovo, ZTE and others )

-> Unlike other "solutions", CM2 make FIRMWARE, NOT A STUPID PLAIN DUMP ( i.e. cloning )
-> That means all device unique data, security etc. will remain safe after flashing!

*Service operations:
FastBoot -> EDL forcer : more types supported for init EDL

*Other
Some missed Xiaomi models added in list of supported
Some missed, but supported CPUs included in list of supported (MSM8956, MSM8x28)
Some other improvements and fixes

Download link #1

Download link #2

Download link #3


New method to upload firmware files to support area - Flash Files Database - iosFileUploader

New method to download firmware files from support area - Flash Files Torrent system

Infinity-Box 12 years (2005 - 2017) updates and support as nobody else - Infinity-Box - News

Unlock Codes (Huawei, SE, Motorola, Samsung etc.), iPhone Unlock, Software Activations - Infinity-Box Online Service

- Infinity-Box Dongle ready for delivery
- BB5 Easy Service Tool [BEST] Dongle
- CDMA-Tool Dongle (fast and easy unlock)

Twitter - Facebook - Telegram

[.:Sanjh Phoenix:.]

http://forum.gsmhosting.com/vbb/f296.../#post12304921

[makeenithar]

am i the first? thank you team

[mcclinic]

Dongle Firmware upgrade failed

why? ask to yellow boss.

http://forum.gsmhosting.com/vbb/f296...l#post12304763

[.:Sanjh Phoenix:.]

Originally Posted by mcclinic

Dongle Firmware upgrade failed

http://forum.gsmhosting.com/vbb/f296...l#post12304763

http://forum.gsmhosting.com/vbb/f296...l#post12305120

[appsworlmardan]

sir whats about the emergncy driver or location of it

[JayDi]

Originally Posted by appsworlmardan

sir whats about the emergncy driver or location of it

It located on support area.
Manual in sticky thread ( FAQ )

[JayDi]

Some mandatory changes in Memory Tool explained here :
http://forum.gsmhosting.com/vbb/12305159-post51.html

[JayDi]

MSM8992 tests

MemoryTool :

Operation : Memory Tool Init [ v1.10 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 808 [MSM8992]
ID_BLOCK_S : 010B8621
ID_BLOCK_I : 009690E1
ID_BLOCK_L : 3D7AE9C5777EA2F59CD06027BB2BD3E4
ID_BLOCK_L : D52359F83F1E08E69168A99CDB539FC2
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8992 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ] 
ExtInfo : 0x0000C000/00100000/00000400/00001000
Boot Ok!

Set default path : E:\InfinityBox\CM2QLM\phdata\

Ready!

Operation : Erase Memory [ v1.10 ]

Erase selected partitions [1]
[0] Erase partition : MISC
Erase partition Ok!
Operation finished!

Operation : Test Memory [ v1.10 ]

Preparing memory test ... 
Step #1 passed
Step #2 passed
Memory is Ok!
Clean Ok!

Operation finished!

Operation : Read Memory  [ v1.10 ]

Reading selected partitions [1]
[0] Read partition : PERSIST
Saved to : E:\InfinityBox\CM2QLM\phdata\PERSIST.bin
Operation finished!

Operation : Erase Memory [ v1.10 ]

Erase selected partitions [1]
[0] Erase partition : PERSIST
Erase partition Ok!
Operation finished!

Operation : Update Memory info [ v1.10 ]

Operation finished!

Operation Write Memory [ v1.10 ]

Write selected partitions [1]
[0] Write partition : PERSIST
Write from : E:\InfinityBox\CM2QLM\phdata\PERSIST.bin
Write partition Ok!
Operation finished!

Operation : Update Memory info [ v1.10 ]

Operation finished!

Operation : Test Memory [ v1.10 ]

Preparing memory test ... 
Step #1 passed
Step #2 passed
Memory is Ok!
Clean Ok!

Operation finished!

Operation : Update Memory info [ v1.10 ]

Operation finished!


Close MemoryTool session

Done!
Elapsed: 00:03:07

Reconnect Power/Cable!

Read Flash :

Operation : Read Flash [ v1.10 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 808 [MSM8992]
ID_BLOCK_S : 010B8621
ID_BLOCK_I : 009690E1
ID_BLOCK_L : 3D7AE9C5777EA2F59CD06027BB2BD3E4
ID_BLOCK_L : D52359F83F1E08E69168A99CDB539FC2
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8992 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ] 
ExtInfo : 0x0000C000/00100000/00000400/00001000
Boot Ok!


Brand     : Xiaomi
ProdName  : libra
ProdModel : Mi-4c
Device    : libra
AndroidVer: 5.1.1
Manufact. : Xiaomi
QLMxCPU   : MSM8992

DevInfo : MSM8992__Xiaomi__Xiaomi__ANDR_v5.1.1__Mi-4c__libra__libra

Reading Flash Content ... 
[Read Ok] : gpt_main0.bin
[Read Ok] : sbl1.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : ddr.bin
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : misc.img
[Read Ok] : btfm.mbn
[Read Ok] : pmic.bin
[Read Ok] : deploy.mbn
[Read Ok] : lsplash.img
[Read Ok] : fs_gc.img
[Read Ok] : NON-HLOS.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : persist.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : cust.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8992 / eMMC
Firmware Size : 1455 MiB

Done!
Elapsed: 00:04:12

Reconnect Power/Cable!

Flashing :

Loading firmware ... 
Created by Infinity-Box (c) Chinese Miracle II (c) 2017

Device Brand    : Xiaomi
Device Manufact.: Xiaomi
Device Model    : libra
Device CPU      : MSM8992
Device IntName  : libra
Device Version  : 5.1.1
CU_SWVer        : Xiaomi
Device Compile  : 30.06.2016 14:43:26
Device ExtInfo  : Mi-4c
Load Ok!

Operation : Flash [ v1.10 ]
ForceFlashing : Enabled

Verify FW package ... 
Verification passed!

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 808 [MSM8992]
ID_BLOCK_S : 010B8621
ID_BLOCK_I : 009690E1
ID_BLOCK_L : 3D7AE9C5777EA2F59CD06027BB2BD3E4
ID_BLOCK_L : D52359F83F1E08E69168A99CDB539FC2
Pickup loader from firmware package
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8992 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ] 
ExtInfo : 0x0000C000/00100000/00000400/00001000
Boot Ok!

Files in Chain : 40
Flashing now

Flashing : gpt_main0.bin
Flashing : sbl1.mbn
Flashing : sbl1.mbn
Flashing : rpm.mbn
Flashing : rpm.mbn
Flashing : tz.mbn
Flashing : tz.mbn
Flashing : hyp.mbn
Flashing : hyp.mbn
Flashing : emmc_appsboot.mbn
Flashing : emmc_appsboot.mbn
Flashing : misc.img
Flashing : btfm.mbn
Flashing : deploy.mbn
Flashing : lsplash.img
Flashing : fs_gc.img
Flashing : NON-HLOS.bin
Flashing : boot.img
Flashing : recovery.img
Flashing : persist.img
Flashing : system.img
Flashing : cache.img
Flashing : cust.img
Flashing : userdata.img
Flashing : gpt_backup0.bin

Boot settings configured!

Flashing done!

Done!
Elapsed: 00:02:43

[wohlstand]

Redmi Note 1 lte ACCOUNT removed finally!!! Awesome update

Operation : Reset Settings [ v1.10 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 400 [MSM8x26/28]
ID_BLOCK_S : 085EC03B
ID_BLOCK_I : 009180E1
ID_BLOCK_L : 48B8D22C8B171C0FF8ADA7A87732428A
ID_BLOCK_L : 3548F6595AC575FE13E2B76C6689A7A4
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8x26 , FLASH : eMMC , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000
Boot Ok!

Format USER ...
Format CACHE ...
Format Ok!

Done!
Elapsed: 00:00:30

Reconnect Power/Cable!

Thanks JayDi

[JayDi]

If you get in device manager in ports : 900E ( instead of CareSuite or 9008 ) - then it mean device has been stuck in S-EDL , where is active SBL port with very less command chain. It not allow reprogram device and require to seek TP ( required ), or use bootjig ( it almost not work )

If you install drivers and connect device, you will get such message :

Operation : Identify [ v1.10 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
ID_BLOCK_S : 02658DC1

Error : Device stuck in S-EDL!
S-EDL : Reset power. Use BootJIG ( probably it is time to seek TP )

Reconnect Power/Cable!

That can heppen if you try play with boot partitions ( rpm,gpt,tz ). If you decide to play with them ( i.e. erase ) - you should process sbl also.

[PASSIONATE_BOYS]

MI Note 3 phone lock removed-
Phone turned into EDL esaily with CM2 by one click- FastBoot to EDL (mode#1)-

Connect device in fastboot mode ... 
Connect Ok!
Trying set EDL mode ... 
If device not reboot in EDL - use KEYS combination/EDL cable/TP
Operation finished!

Format-

Operation : Reset Settings [ v1.10 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 652 [MSM8976]
ID_BLOCK_S : 0260E150
ID_BLOCK_I : 009B00E1
ID_BLOCK_L : CE8B1836868D7326AF218FF66AD82017
ID_BLOCK_L : 28D4AE05C8E3E33B24875C4730A67237
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8976 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ] 
ExtInfo : 0x0000C000/00100000/00001000/00001000
Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HBG4a2
Boot Ok!

Format USER ... 
Format CACHE ... 
Format Ok!

Done!
Elapsed: 00:00:08

Reconnect Power/Cable!

Br.
Infintiy Box Team.

[Yusuf Lawal]

infinity box team, always keep their promise

[princesaddam]

Mi3s 2016032
boot to Edl

Connect device in fastboot mode ... 
Connect Ok!
Trying set EDL mode ... 
If device not reboot in EDL - use KEYS combination/EDL cable/TP
Operation finished!

Read info

Operation : Identify [ v1.10 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 430 [MSM8937]
ID_BLOCK_S : 01461950
ID_BLOCK_I : 0004F0E1
ID_BLOCK_L : CE8B1836868D7326AF218FF66AD82017
ID_BLOCK_L : 0EEE8423F2C5CD1DDAAD66611E885409
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8937 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ] 
ExtInfo : 0x0000C000/00100000/00001000/00001000
Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HBG4a2
Boot Ok!


Brand     : Xiaomi
ProdName  : land
ProdModel : Redmi 3S
Device    : land
AndroidVer: 6.0.1
Manufact. : Xiaomi
QLMxCPU   : MSM8937

Done!
Elapsed: 00:00:06

Reconnect Power/Cable!

Read modem for future use done

Reading selected partitions [1]
[0] Read partition : MODEM
Saved to : C:\InfinityBox\CM2QLM\phdata\MODEM.bin
Operation finished!Reading selected partitions [2]
[0] Read partition : MODEMST1
Saved to : C:\InfinityBox\CM2QLM\phdata\MODEMST1.bin
[1] Read partition : MODEMST2
Saved to : C:\InfinityBox\CM2QLM\phdata\MODEMST2.bin
Operation finished!

[Absar_Global]

Thanks infinity team,Please add repair security and imei in next update