Infinity Chinese Miracle-2 QLM v1.16 - Lot of new models and features - Page 15 - GSM-Forum

aljawkeer · 03-29-2018, 19:28

Quote:

Originally Posted by oiloil200

CM2QLM & LGS not working

update your box firmware from box DongleManager

aljawkeer · 03-30-2018, 16:07

This update is good I used it to unlock frp for vivo device

MSM8937__vivo__vivo__ANDR_v6.0.1__vivo_PD1628F_EX_ _msm8937_32__PD1628F_EX

okello · 03-31-2018, 07:33

Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 425 [MSM8917]
ID_BLOCK_S : 1FEDA089
ID_BLOCK_L : 85C2417DCFC60A6D6478C8BF13837B5C
ID_BLOCK_L : B7413B9A5D7C16C4B30ACFBAC531FDA0
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8917 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HAG4a2
Boot Ok!

MIAccount reset passed!

Device may relock back on WiFi/Network enable!

is there anyway to remove it permanently

aljawkeer · 03-31-2018, 15:59

I want to fix LG770 by Box Infinity CM2QLM if possible
From the dead boot qualcomm 9008
MSM8916__LGLS770

aljawkeer · 03-31-2018, 16:40

Model : LGL16C

Wait for phone...

Device Found!

Initialize ...

Handshake passed!

ID_BLOCK_I : SnapDragon 2x/4x|00 [MSM8x10]

ID_BLOCK_S : 0BAB55A7

ID_BLOCK_E : 00310229

ID_BLOCK_L : 3CC4BE58F763689B4439DBC4035ED6F6

ID_BLOCK_L : 661DA30A0F96384D40AFE0D92BDAD4F7

Use CM2 Internal Loader

ERROR : Prepare target failed! Unsupported SecureType!

INFO : Send log and report.log to support! Include device info also!

Reconnect Power/Cable!
================================================== =======================

metam · 03-31-2018, 18:24

Nexus 6p last security patch, frp remove done

-/-/-/-/-/-/-/-/-/-/-

Code:

Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.16


Operation : Reset Settings [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
ID_BLOCK_I : SnapDragon 810 [MSM8994]
ID_BLOCK_S : 02471A41
ID_BLOCK_E : 00150020
ID_BLOCK_L : E14CEEDB92235F4154F9668CE17E1F3D
ID_BLOCK_L : 1595B0F2D42D4A5F23B42CFE24E6698D
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8994 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ] 
ExtInfo : 0x00008000/00008000/00001000/00001000/00000200
Boot Ok!

Remove FRP
Reset Ok!
Remove FRP
Reset Ok!

Done!
Elapsed: 00:00:23

Reconnect Power/Cable!

louka · 04-02-2018, 19:35

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 652 [MSM8952]
ID_BLOCK_S : 760A4075
ID_BLOCK_I : 009900E1
ID_BLOCK_L : 852ACB169422654EC79F6A201A123AB0
ID_BLOCK_L : BDF711B3ECAF816288241B6E0AA8131B
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8976 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000E8F800000 [ eMMC 64 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000
Boot Ok!

Format USER ...
Format CACHE ...
Format Ok!
Remove FRP ( Google Reset Protection )
FRP removed!

Done!
Elapsed: 00:00:13

Reconnect Power/Cable!

aljawkeer · 04-03-2018, 20:54

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 801 [MSM8974]
ID_BLOCK_S : 0C2C4A5A
ID_BLOCK_E : 00040000
ID_BLOCK_L : 54186E15F9EF78FFF6D9140DD2524FE8
ID_BLOCK_L : B7BD5C2211633F87A6D7A1B0B477669B
Use CM2 Internal Loader

ERROR : Prepare target failed! Unsupported SecureType!
INFO : Send log and report.log to support! Include device info also!

Reconnect Power/Cable!

quang_mobile · 04-04-2018, 03:51

huawei tab 8.0 S8-701u read rom ok
Operation : Read Flash [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 2x/4x|00 [MSM8x12]
ID_BLOCK_S : 02E4FF7A
ID_BLOCK_L : 0FF9936BCA505D48376CE4E9360D85C5
ID_BLOCK_L : BFD678D3C44FFF74896429E6EC031D3E
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000/00000000
Boot Ok!

Brand : Huawei
ProdName : msm8610
ProdModel : MediaPad T1 8.0
Device : msm8610
AndroidVer: 4.3
Manufact. : HUAWEI
QLMxCPU : MSM8610

DevInfo : MSM8610__HUAWEI__Huawei__ANDR_v4.3___MediaPad_T1_8 .0__msm8610__msm8610

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : sbl1.mbn
[Read Ok] : deploy.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : oemdata.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : fs_gc.img
[Read Ok] : persist.img
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : cust.img
[Read Ok] : cache.img
[Read Ok] : misc.img
[Read Ok] : system.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!

write rom from read fail
Loading firmware ...
data : C:\Users\Administrator\Desktop\MSM8610__HUAWEI__Hu awei__ANDR_v4.3___MediaPad_T1_8.0__msm8610__msm861 0\userdata.img
Firmware load error!
Firmware incomplete! Some files are missing!
how to fix this problem?

moniuzzaman · 04-04-2018, 14:48

xiomi mi 4i read done

Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.16

Operation : Identify [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...

BREAK : Device not found!
HINT : Check cable, connection and drivers!

Reconnect Power/Cable!

Operation : Identify [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 610 [MSM8936]
ID_BLOCK_S : 00C36BAF
ID_BLOCK_L : AFE87B57E5ECD4870E42EE59CDB94176
ID_BLOCK_L : 8D6B01A07746409E5920E1E4930BD78A
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8936 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!

Brand : Xiaomi
ProdName : ferrari
ProdModel : Mi 4i
Device : ferrari
AndroidVer: 5.0.2
Manufact. : Xiaomi
SysPatch : LRX22G
DevComTime: 8/14/2016 6:26:59 AM
QLMxCPU : MSM8916

USERData : NORMAL
GCSec : NORMAL

Done!
Elapsed: 00:00:18

Reconnect Power/Cable!

Operation : Read Flash [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 610 [MSM8936]
ID_BLOCK_S : 00C36BAF
ID_BLOCK_L : AFE87B57E5ECD4870E42EE59CDB94176
ID_BLOCK_L : 8D6B01A07746409E5920E1E4930BD78A
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8936 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!

Brand : Xiaomi
ProdName : ferrari
ProdModel : Mi 4i
Device : ferrari
AndroidVer: 5.0.2
Manufact. : Xiaomi
QLMxCPU : MSM8916

DevInfo : MSM8916__Xiaomi__Xiaomi__ANDR_v5.0.2__Mi_4i__ferra ri__ferrari

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : sbl1.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : sec.dat
[Read Ok] : misc.img
[Read Ok] : fs_gc.img
[Read Ok] : NON-HLOS.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : persist.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8936 / eMMC
Firmware Size : 1935 MiB

Done!
Elapsed: 00:04:17

Reconnect Power/Cable!

mani78600 · 04-07-2018, 14:38

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 415 [MSM8929]
ID_BLOCK_S : 01367185
ID_BLOCK_E : 00040000
ID_BLOCK_L : 2409284B06801FB531C84B44EE2A431F
ID_BLOCK_L : 8216CEBF97464304AE57D4A3C350302B
Pickup loader from firmware package
FH_LOAD_CODE : 15

ERROR : Loader send failed!
HINT : Check cable, connection and drivers!

Reconnect Power/Cable!

plzz help

mani78600 · 04-07-2018, 14:51

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 610 [MSM8936]
ID_BLOCK_S : 040D0BBB
ID_BLOCK_L : C83852AC0B979C8F782D2728F7B2C20A
ID_BLOCK_L : C4BF01A8AD34A62FA20D46BFB5787655
Use CM2 Internal Loader
FH_LOAD_CODE : 15

ERROR : Loader send failed!
HINT : Check cable, connection and drivers!

Reconnect Power/Cable!

help plzzz

Infinity-BEST · 04-15-2018, 12:58

Quote:

Originally Posted by mani78600

Code:

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
ID_BLOCK_I : SnapDragon 415 [MSM8929]
ID_BLOCK_S : 01367185
ID_BLOCK_E : 00040000
ID_BLOCK_L : 2409284B06801FB531C84B44EE2A431F
ID_BLOCK_L : 8216CEBF97464304AE57D4A3C350302B
Pickup loader from firmware package
FH_LOAD_CODE : 15

ERROR : Loader send failed!
HINT : Check cable, connection and drivers!

Reconnect Power/Cable!

plzz help

Unselect FW, because QLM use loader from it.

Quote:

Originally Posted by mani78600

Code:

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
ID_BLOCK_I : SnapDragon 610 [MSM8936]
ID_BLOCK_S : 040D0BBB
ID_BLOCK_L : C83852AC0B979C8F782D2728F7B2C20A
ID_BLOCK_L : C4BF01A8AD34A62FA20D46BFB5787655
Use CM2 Internal Loader
FH_LOAD_CODE : 15

ERROR : Loader send failed!
HINT : Check cable, connection and drivers!

Reconnect Power/Cable!

help plzzz

Probably device eMMC has been damaged, but that according log.
What problem with device? If it stuck in emergency mode always - that mean HW reason.

alamgirboss · 04-15-2018, 13:51

I have an infinity-box, but the dongle gets worse, how can I get the dongle now, please excite me

rakhadul · 04-15-2018, 14:36

oppo a71 2018 Not Supprot

04-02-2018, 19:35	#217 (permalink)
louka No Life Poster Join Date: Nov 2005 Posts: 947 Member: 198016 Status: Offline Sonork: 100.1602918 Thanks Meter: 408	Oppo f3 plus frp done 1. Power Off Phone , Remove battery , Insert back 2. PRESS and HOLD BOTH VOLUME KEYS! 3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode! Wait for phone... Device Found! Initialize ... Handshake passed! BB_IDC_CPU : SnapDragon 652 [MSM8952] ID_BLOCK_S : 760A4075 ID_BLOCK_I : 009900E1 ID_BLOCK_L : 852ACB169422654EC79F6A201A123AB0 ID_BLOCK_L : BDF711B3ECAF816288241B6E0AA8131B Use CM2 Internal Loader Loader Sent! Initializing ... Running FireHose on BBID : MSM8976 , FLASH : eMMC , mVER : 1 MemInfo : 0x0003 / 0x0200 / 0x0000000E8F800000 [ eMMC 64 GiB ] ExtInfo : 0x0000C000/00100000/00001000/00001000 Boot Ok! Format USER ... Format CACHE ... Format Ok! Remove FRP ( Google Reset Protection ) FRP removed! Done! Elapsed: 00:00:13 Reconnect Power/Cable!

04-03-2018, 20:54	#218 (permalink)
aljawkeer Junior Member Join Date: Feb 2013 Posts: 15 Member: 1886114 Status: Offline Thanks Meter: 0	zten9835 Wait for phone... Device Found! Initialize ... Handshake passed! ID_BLOCK_I : SnapDragon 801 [MSM8974] ID_BLOCK_S : 0C2C4A5A ID_BLOCK_E : 00040000 ID_BLOCK_L : 54186E15F9EF78FFF6D9140DD2524FE8 ID_BLOCK_L : B7BD5C2211633F87A6D7A1B0B477669B Use CM2 Internal Loader ERROR : Prepare target failed! Unsupported SecureType! INFO : Send log and report.log to support! Include device info also! Reconnect Power/Cable!

03-30-2018, 16:07	#212 (permalink)
aljawkeer Junior Member Join Date: Feb 2013 Posts: 15 Member: 1886114 Status: Offline Thanks Meter: 0	This update is good I used it to unlock frp for vivo device MSM8937__vivo__vivo__ANDR_v6.0.1__vivo_PD1628F_EX_ _msm8937_32__PD1628F_EX

03-31-2018, 07:33	#213 (permalink)
okello No Life Poster Join Date: Jul 2011 Location: Nairobi, Kenya Posts: 538 Member: 1610674 Status: Offline Sonork: 210921 Thanks Meter: 217	Initialize ... Handshake passed! ID_BLOCK_I : SnapDragon 425 [MSM8917] ID_BLOCK_S : 1FEDA089 ID_BLOCK_L : 85C2417DCFC60A6D6478C8BF13837B5C ID_BLOCK_L : B7413B9A5D7C16C4B30ACFBAC531FDA0 Use CM2 Internal Loader Loader Sent! Initializing ... Running FireHose on BBID : MSM8917 , FLASH : eMMC , mVER : 1 MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ] ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200 Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HAG4a2 Boot Ok! MIAccount reset passed! Device may relock back on WiFi/Network enable! is there anyway to remove it permanently

03-31-2018, 15:59	#214 (permalink)
aljawkeer Junior Member Join Date: Feb 2013 Posts: 15 Member: 1886114 Status: Offline Thanks Meter: 0	I want to fix LG770 by Box Infinity CM2QLM if possible From the dead boot qualcomm 9008 MSM8916__LGLS770

03-31-2018, 16:40	#215 (permalink)
aljawkeer Junior Member Join Date: Feb 2013 Posts: 15 Member: 1886114 Status: Offline Thanks Meter: 0	Model : LGL16C Wait for phone... Device Found! Initialize ... Handshake passed! ID_BLOCK_I : SnapDragon 2x/4x\|00 [MSM8x10] ID_BLOCK_S : 0BAB55A7 ID_BLOCK_E : 00310229 ID_BLOCK_L : 3CC4BE58F763689B4439DBC4035ED6F6 ID_BLOCK_L : 661DA30A0F96384D40AFE0D92BDAD4F7 Use CM2 Internal Loader ERROR : Prepare target failed! Unsupported SecureType! INFO : Send log and report.log to support! Include device info also! Reconnect Power/Cable! ================================================== =======================

04-04-2018, 03:51	#219 (permalink)
quang_mobile Junior Member Join Date: Feb 2010 Location: hochiminh city vietnam Posts: 30 Member: 1241627 Status: Offline Thanks Meter: 5	huawei tab 8.0 S8-701u read rom ok Operation : Read Flash [ v1.16 ] 1. Power Off Phone , Remove battery , Insert back 2. PRESS and HOLD BOTH VOLUME KEYS! 3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode! Wait for phone... Device Found! Initialize ... Handshake passed! ID_BLOCK_I : SnapDragon 2x/4x\|00 [MSM8x12] ID_BLOCK_S : 02E4FF7A ID_BLOCK_L : 0FF9936BCA505D48376CE4E9360D85C5 ID_BLOCK_L : BFD678D3C44FFF74896429E6EC031D3E Use CM2 Internal Loader Loader Sent! Initializing ... Running FireHose on BBID : MSM8x10 , FLASH : eMMC , mVER : 1 ExtInfo : 0x0000C000/0000C000/00001000/00001000/00000000 Boot Ok! Brand : Huawei ProdName : msm8610 ProdModel : MediaPad T1 8.0 Device : msm8610 AndroidVer: 4.3 Manufact. : HUAWEI QLMxCPU : MSM8610 DevInfo : MSM8610__HUAWEI__Huawei__ANDR_v4.3___MediaPad_T1_8 .0__msm8610__msm8610 Reading Flash Content ... [Read Ok] : gpt_main0.bin [Read Ok] : sbl1.mbn [Read Ok] : deploy.mbn [Read Ok] : rpm.mbn [Read Ok] : tz.mbn [Read Ok] : emmc_appsboot.mbn [Read Ok] : oemdata.bin [Read Ok] : NON-HLOS.bin [Read Ok] : fs_gc.img [Read Ok] : persist.img [Read Ok] : boot.img [Read Ok] : recovery.img [Read Ok] : cust.img [Read Ok] : cache.img [Read Ok] : misc.img [Read Ok] : system.img [Read Ok] : userdata.img [Read Ok] : gpt_backup0.bin Android Info saved! Read finished! write rom from read fail Loading firmware ... data : C:\Users\Administrator\Desktop\MSM8610__HUAWEI__Hu awei__ANDR_v4.3___MediaPad_T1_8.0__msm8610__msm861 0\userdata.img Firmware load error! Firmware incomplete! Some files are missing! how to fix this problem?

04-04-2018, 14:48	#220 (permalink)
moniuzzaman Freak Poster Join Date: Dec 2008 Posts: 247 Member: 931121 Status: Offline Thanks Meter: 100	xiomi mi 4i read done Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.16 Operation : Identify [ v1.16 ] 1. Power Off Phone , Remove battery , Insert back 2. PRESS and HOLD BOTH VOLUME KEYS! 3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode! Wait for phone... BREAK : Device not found! HINT : Check cable, connection and drivers! Reconnect Power/Cable! Operation : Identify [ v1.16 ] 1. Power Off Phone , Remove battery , Insert back 2. PRESS and HOLD BOTH VOLUME KEYS! 3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode! Wait for phone... Device Found! Initialize ... Handshake passed! ID_BLOCK_I : SnapDragon 610 [MSM8936] ID_BLOCK_S : 00C36BAF ID_BLOCK_L : AFE87B57E5ECD4870E42EE59CDB94176 ID_BLOCK_L : 8D6B01A07746409E5920E1E4930BD78A Use CM2 Internal Loader Loader Sent! Initializing ... Running FireHose on BBID : MSM8936 , FLASH : eMMC , mVER : 1 MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ] ExtInfo : 0x00004000/00004000/00001000/00001000/00000200 Boot Ok! Brand : Xiaomi ProdName : ferrari ProdModel : Mi 4i Device : ferrari AndroidVer: 5.0.2 Manufact. : Xiaomi SysPatch : LRX22G DevComTime: 8/14/2016 6:26:59 AM QLMxCPU : MSM8916 USERData : NORMAL GCSec : NORMAL Done! Elapsed: 00:00:18 Reconnect Power/Cable! Operation : Read Flash [ v1.16 ] 1. Power Off Phone , Remove battery , Insert back 2. PRESS and HOLD BOTH VOLUME KEYS! 3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode! Wait for phone... Device Found! Initialize ... Handshake passed! ID_BLOCK_I : SnapDragon 610 [MSM8936] ID_BLOCK_S : 00C36BAF ID_BLOCK_L : AFE87B57E5ECD4870E42EE59CDB94176 ID_BLOCK_L : 8D6B01A07746409E5920E1E4930BD78A Use CM2 Internal Loader Loader Sent! Initializing ... Running FireHose on BBID : MSM8936 , FLASH : eMMC , mVER : 1 MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ] ExtInfo : 0x00004000/00004000/00001000/00001000/00000200 Boot Ok! Brand : Xiaomi ProdName : ferrari ProdModel : Mi 4i Device : ferrari AndroidVer: 5.0.2 Manufact. : Xiaomi QLMxCPU : MSM8916 DevInfo : MSM8916__Xiaomi__Xiaomi__ANDR_v5.0.2__Mi_4i__ferra ri__ferrari Reading Flash Content ... [Read Ok] : gpt_main0.bin [Read Ok] : sbl1.mbn [Read Ok] : rpm.mbn [Read Ok] : tz.mbn [Read Ok] : hyp.mbn [Read Ok] : emmc_appsboot.mbn [Read Ok] : sec.dat [Read Ok] : misc.img [Read Ok] : fs_gc.img [Read Ok] : NON-HLOS.bin [Read Ok] : boot.img [Read Ok] : recovery.img [Read Ok] : persist.img [Read Ok] : system.img [Read Ok] : cache.img [Read Ok] : userdata.img [Read Ok] : gpt_backup0.bin Android Info saved! Read finished! Configuration : MSM8936 / eMMC Firmware Size : 1935 MiB Done! Elapsed: 00:04:17 Reconnect Power/Cable!

04-07-2018, 14:38	#221 (permalink)
mani78600 Major Poster Join Date: Jan 2017 Location: Rawalpindi Posts: 40 Member: 2676621 Status: Offline Thanks Meter: 14	1. Power Off Phone , Remove battery , Insert back 2. PRESS and HOLD BOTH VOLUME KEYS! 3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode! Wait for phone... Device Found! Initialize ... Handshake passed! ID_BLOCK_I : SnapDragon 415 [MSM8929] ID_BLOCK_S : 01367185 ID_BLOCK_E : 00040000 ID_BLOCK_L : 2409284B06801FB531C84B44EE2A431F ID_BLOCK_L : 8216CEBF97464304AE57D4A3C350302B Pickup loader from firmware package FH_LOAD_CODE : 15 ERROR : Loader send failed! HINT : Check cable, connection and drivers! Reconnect Power/Cable! plzz help

04-07-2018, 14:51	#222 (permalink)
mani78600 Major Poster Join Date: Jan 2017 Location: Rawalpindi Posts: 40 Member: 2676621 Status: Offline Thanks Meter: 14	1. Power Off Phone , Remove battery , Insert back 2. PRESS and HOLD BOTH VOLUME KEYS! 3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode! Wait for phone... Device Found! Initialize ... Handshake passed! ID_BLOCK_I : SnapDragon 610 [MSM8936] ID_BLOCK_S : 040D0BBB ID_BLOCK_L : C83852AC0B979C8F782D2728F7B2C20A ID_BLOCK_L : C4BF01A8AD34A62FA20D46BFB5787655 Use CM2 Internal Loader FH_LOAD_CODE : 15 ERROR : Loader send failed! HINT : Check cable, connection and drivers! Reconnect Power/Cable! help plzzz

04-15-2018, 13:51	#224 (permalink)
alamgirboss Freak Poster Join Date: Jan 2010 Posts: 103 Member: 1220104 Status: Offline Sonork: 1592061 Thanks Meter: 44	I have an infinity-box, but the dongle gets worse, how can I get the dongle now, please excite me

04-15-2018, 14:36	#225 (permalink)
rakhadul Insane Poster Join Date: Nov 2017 Location: Bangladesh Posts: 96 Member: 2782007 Status: Offline Thanks Meter: 32	oppo a71 2018 Not Supprot