Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.06 - Android 10, FastRead, FastFlash Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.06 - Android 10, FastRead, FastFlash As ordinary, unique functions and methods released Core Changed : FlashCore Protocol updated Changed : DiagCore Protocol updated Changed : NAND protocol adaptation Changed : Operations speed increased Flasher Changed : Flash Engine updated Changed : Handling for 64bit files optimized Changed : Activated FastFlash V1 protocol * Changed : Activated FastFlash V2 protocol * !* FastFlash protocol allow increase flashing speed for big unsparsed images !* FastFlash protocol reduce flashing time up to 4-6 times, depend on device configuration - 3-4 minutes against 20-25 !* FastFlash activated automatically, if can be performed !* GOOD USB cable and GOOD USB port must be used - do not use USB HUBs ! Changed : Support for new PAC formats activated: v2.x.x line Service Changed : Identify scheme : Read more accurate and complete info * !* Include modern Android 9 and Android 10 devices Changed : Precise FileSystem settings detection ( Type and Encryption algo ) Changed : Better security detection Changed : Format FS / Reset settings updated Firmware Reader Changed : Reading speed up to 30% faster ! * !* Test feature, support modern UniSoc devices: SC7731E, SC9832E, SC9863 !* Test feature, only RS-featured loaders supported ! Changed : Android 10 support activated! * !* Support latest Android 9 and modern Android 10 devices from now! !* Allow read complete firmware image from Android 10 devices without loss any ota/vendor abilities Changed : X64 devices/loaders native support activated for complete reading Changed : SW now create Android-version depend images for better compatibility Changed : SW now create correct FileSystems bundle according device settings * !* Almost reducing "hang" case after flashing Changed : Improved structure identification Changed : Support more different types Changed : Structure identification and NAND reader more stable now (complete E-series NAND adaptation is on the way) Model DB Changed : New loaders included for various set of devices Changed : New Generic loaders included and updated existing ones Other Changed : Removed outdated options from platform tab, many options changed to atomatic mode BugFix : Minor changes and fixes Info Android 10 enabled devices : SC7731E, SC9832E, SC9863 FastFlash enabled devices : SC9832E, SC9863 Download link #1 Download link #2 Download link #3 How to upload files to support Infinity-Box 15 years updates and support as nobody else since year 2005 https://www.infinity-box.com/cdn/tg48.png https://www.infinity-box.com/cdn/yt48.png https://www.infinity-box.com/cdn/fb48.png https://www.infinity-box.com/cdn/tw48.png https://www.infinity-box.com/cdn/ios2-48.png https://www.infinity-box.com/cdn/j48.png |
excellent. keep it up, now remain SP lock for latest model like ZTE L130 SC7731E android 9, nokia c1 (Ta-1162) it is becoming more challenging to us these days, we have heaps and heaps of them. |
Really awesome speed Thank you infinity Team. Operation : Identify [ v2.06 ] BootMode : FLASH 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! BootVersion : SPRD3 Boot : INF : 0_SC7731x_BASE : SC7731G_eMMC_1GB_NS Sending Init Boot ... Boot sent! Kick FDL ... Kick FDL again ... BootVersion : Spreadtrum Boot Block version 1.1 Protocol setup ... Port speed : 921600 Sending Flash Boot ... Boot sent! Kick FLASH FDL ... FDL : Control transfered! Boot Done! Device info : Patch Level : MRA58K Display ID : J106_V04-B_Infinity_blade_V1.0_20190905 Ver. Incmt : root-103233 Ver. CodeName : REL Ver. Release : 8.1 Sec. Patch : 2016-07-01 Build Time : 1567679979 Product Brand : android_1 Product Name : Infinity_blade Product Device : Infinity_blade Product Board : sp7731gea_hdr Product Manfct : android_1 Board Platform : sc8830 Product Info : Infinity_blade Product Model : Infinity blade Platform Version: MOCORTM_14B_MP_7731G_W17.22.4_Debug Project Version: sc7731g_CP0_modem BASE Version: TM_BASE_W17.22.4 MMI Version: sc7731g_modem HW Version: sc7731g_CP0_modem CMP_Time : 05-31-2017 21:23:59 MODEM TAG : MOCORTM_14B_MP_7731G_W17.22.4_Debug_TM_BASE_W17.22 .4_sc7731g_CP0_modem_sc7731g_CP0_modem_sc7731g_mod em Done! Elapsed: 00:00:52 Operation : Format FS / Reset Settings [ v2.06 ] Mode : Default [ Reset Settings + FRP ] BootMode : FLASH 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! BootVersion : SPRD3 Boot : INF : 0_SC7731x_BASE : SC7731G_eMMC_1GB_NS Sending Init Boot ... Boot sent! Kick FDL ... Kick FDL again ... BootVersion : Spreadtrum Boot Block version 1.1 Protocol setup ... Port speed : 921600 Sending Flash Boot ... Boot sent! Kick FLASH FDL ... FDL : Control transfered! Boot Done! Wipe Ok : UserData Wipe Ok : Cache Wipe Ok : FRP Reconnect Power/Cable! Done! Elapsed: 00:01:18 Operation : Read FW [ v2.06 ] 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! BootVersion : SPRD3 Boot : INF : 0_SC7731x_BASE : SC7731G_eMMC_1GB_NS Sending Init Boot ... Boot sent! Kick FDL ... Kick FDL again ... BootVersion : Spreadtrum Boot Block version 1.1 Protocol setup ... Port speed : 921600 Sending Flash Boot ... Boot sent! Kick FLASH FDL ... FDL : Control transfered! Boot Done! Device info : Patch Level : MRA58K Display ID : J106_V04-B_Infinity_blade_V1.0_20190905 Ver. Incmt : root-103233 Ver. CodeName : REL Ver. Release : 8.1 Sec. Patch : 2016-07-01 Build Time : 1567679979 Product Brand : android_1 Product Name : Infinity_blade Product Device : Infinity_blade Product Board : sp7731gea_hdr Product Manfct : android_1 Board Platform : sc8830 Product Info : Infinity_blade Product Model : Infinity blade AndroidVer : 8 VlnrLevel : 0x01 SC8830__android_1__Infinity_blade__8.1__J106_V04-B_Infinity_blade_V1.0_20190905__MRA58K__Infinity_b lade Read : prodnv.img ExtSparse : Compression ratio : 85% Read : phase.cfg Read : wmodem.bin Read : wdsp.bin Read : wnvitem.bin Read : modem_wcn.img Read : wcnnvitem.bin Read : boot_logo.bmp Read : fastboot_logo.bmp Read : logo2.bin Read : logo3.bin Read : logo4.bin Read : logo5.bin Read : boot.img Read : system.img ExtSparse : Compression ratio : 88% Make : persist.img Read : sysinfo.bin ExtSparse : Compression ratio : 6% Make : cache.img Read : recovery.img Make : userdata.img Read : u-boot.bin Read : u-boot-spl.bin Firmware size : 0x4E79385C ( 1.23 GiB ) Android Info saved : _Android_info.txt Reconnect Power/Cable! Done! Elapsed: 00:06:00 |
Quote:
|
LAVA A97 IPS AND:6.0 SC9832A READ NVRM BAG BRUSH HANG ON LOGO Done SUCCESSFULLY READ NVRM BAG BRUSH HANG ON LOGO(LAVA A97 IPS AND:6.0 SC9832A) THANKS INFINITY-BOX TEAM |
good update but we have a problem inifinty team whats the problem with adding SP UNLOCK?SP UNLOCK was last added on V1.27 and only unlocks android 7 and below.Now we are forced to buy other tools like NCK that unlocks all generic and non generic spd chips upto android 10 for free. |
Thank you team cm2 sir request update qualcom |
Quote:
If you think it's easy to create good working software you are always welcome to upload your software here. Your exe will be uploaded to Infinity support area for all users and you can add to your software all functions that you want and of course your banners, photos and links to your facebook page. Please let me know as soon as you will be ready to send me software for test. btw, as you can see Infinity Team always release unique features that others can not do at all. |
Quote:
|
boom boom update tnx team....plz update qlm tool |
excellent update as always |
Thanks 4 update and best wishes. Quote:
|
Quote:
Sir What do you mean by 'Brush' tool I find this word a lot especially when translating from chinese to english lol |
Good update The newly added services are useful, but there is another very important function that SP unlock should implement this option in future updates please, I know it is not easy to develop but it should create efforts to satisfy customers even more |
Quote:
|
All times are GMT +1. The time now is 10:20. |
vBulletin Optimisation provided by
vB Optimise (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -