Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.13 - Boot RSA Auth activated - Page 5 - GSM-Forum

vlaxman · 07-05-2021, 10:35

Qualcomm cpu came into the market. Also stop renewal if you know anything or don't update

tayobjoy1 · 07-06-2021, 13:19

Card found : 46828B86 , v0149
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.13

Load IDBase v8331 Ok!

Operation : SP Unlock [ v2.13 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Mantis_00WW-user 11 RP1A.201005.001 V1.180_B01 release-keys
Platform Version: MOCORTM_17C_W21.11.2_P1_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W21.11.2_P1
HW Version: sc7731e_modem
CMP_Time : 04-14-2021 18:44:01

MODEM TAG : MOCORTM_17C_W21.11.2_P1_Debug_FM_BASE_17C_W21.11.2 _P1_sc7731e_modem_pike2_pub

NVMng : SecurityInfo
IMEI[1] : 357735910746726
IMEI[2] : 357735910746734
WIFIMAC : 44917C05D0C0
BT_MAC : 44917C05D0BF
SEC : SLS:2, SKS:0, SKV:4

SLStatus : 2C
Status : Locked! Server unlock required!

Connecting to server...
Connected
Init...
Init: Ok
Authenticating...
Authenticated
Checking Client version...
Client version Ok
Balance: 15, price:5
Process...
Process : Operation may took 10-15 minutes!

>>> Repeat unlock/repair procedure after requested time again!

Reconnect Power/Cable!

This process took 20 minutes but Still Locked.

mbiborna · 07-06-2021, 14:55

Please Activate this option in next sp2 release
Service/Extra Tab
" Write keaBox "

JayDi · 07-08-2021, 02:18

Quote:

Originally Posted by mbiborna

Please Activate this option in next sp2 release
Service/Extra Tab
" Write keaBox "

Just an option not enough.

Let start from device info.
If you have same device - need FW readout to verify. Can we use other as some sensetive data donor or not.

JayDi · 07-08-2021, 02:19

Quote:

Originally Posted by tayobjoy1

Code:

Card found : 46828B86 , v0149
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.13

Load IDBase v8331 Ok!


Operation : SP Unlock [ v2.13 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
Enter SVC ... 
Waiting Device ... 
Check SVC ... 
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Mantis_00WW-user 11 RP1A.201005.001 V1.180_B01 release-keys
Platform Version: MOCORTM_17C_W21.11.2_P1_Debug
Project Version:   pike2_pub
BASE  Version:    FM_BASE_17C_W21.11.2_P1
HW Version:        sc7731e_modem
CMP_Time : 04-14-2021 18:44:01

MODEM TAG : MOCORTM_17C_W21.11.2_P1_Debug_FM_BASE_17C_W21.11.2_P1_sc7731e_modem_pike2_pub

NVMng  : SecurityInfo 
IMEI[1] : 357735910746726
IMEI[2] : 357735910746734
WIFIMAC : 44917C05D0C0
BT_MAC  : 44917C05D0BF
SEC : SLS:2, SKS:0, SKV:4


SLStatus : 2C
Status : Locked! Server unlock required!

Connecting to server...
Connected
Init...
Init: Ok
Authenticating...
Authenticated
Checking Client version...
Client version Ok
Balance: 15,  price:5
Process...
Process : Operation may took 10-15 minutes!


>>>  Repeat unlock/repair procedure after requested time again!

Reconnect Power/Cable!


This process took 20 minutes but Still Locked.

Seems like you were lucky and made request, when server was under maintenance. All requested jobs are finished already, also some time lags with most newer models may happen, but we will make all of them anyway.

mbiborna · 07-08-2021, 04:45

Quote:

Originally Posted by JayDi

Just an option not enough.

Let start from device info.
If you have same device - need FW readout to verify. Can we use other as some sensetive data donor or not.

unfortunately Phone back to customer
model : symphony i68 ( hw ver 1 v7)
I try to collect that phone 1 more time if possible.

YellowBoss · 07-10-2021, 09:26

Quote:

Originally Posted by tayobjoy1

Card found : 46828B86 , v0149
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.13

Load IDBase v8331 Ok!

Operation : SP Unlock [ v2.13 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Mantis_00WW-user 11 RP1A.201005.001 V1.180_B01 release-keys
Platform Version: MOCORTM_17C_W21.11.2_P1_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W21.11.2_P1
HW Version: sc7731e_modem
CMP_Time : 04-14-2021 18:44:01

MODEM TAG : MOCORTM_17C_W21.11.2_P1_Debug_FM_BASE_17C_W21.11.2 _P1_sc7731e_modem_pike2_pub

NVMng : SecurityInfo
IMEI[1] : 357735910746726
IMEI[2] : 357735910746734
WIFIMAC : 44917C05D0C0
BT_MAC : 44917C05D0BF
SEC : SLS:2, SKS:0, SKV:4

SLStatus : 2C
Status : Locked! Server unlock required!

Connecting to server...
Connected
Init...
Init: Ok
Authenticating...
Authenticated
Checking Client version...
Client version Ok
Balance: 15, price:5
Process...
Process : Operation may took 10-15 minutes!

>>> Repeat unlock/repair procedure after requested time again!

Reconnect Power/Cable!

This process took 20 minutes but Still Locked.

Hi,
It was something wrong with data upload. Order canceled, credits refunded.
You can repeat it again later

Sourovgsm · 07-10-2021, 13:22

add unlock free support...

YellowBoss · 07-11-2021, 09:36

Quote:

Originally Posted by Sourovgsm

add unlock free support...

Hello,

It was added long time ago, see here https://forum.gsmhosting.com/vbb/f29...-test-2924074/

GODISTHEBEST · 07-11-2021, 20:31

hi !
i have this massage when i am trying to IDENTIFY DEVICE
what it can be
i uses the same device name tat i uses 4 month ago
and then it worked
and were can i choode to select ss loader ?

JayDi · 07-12-2021, 02:49

Quote:

Originally Posted by GODISTHEBEST

hi !
i have this massage when i am trying to IDENTIFY DEVICE
what it can be
i uses the same device name tat i uses 4 month ago
and then it worked
and were can i choode to select ss loader ?

In Generic Boot list, just take a look again in BASE boots and you will find tghere is NS, SS, RS, S0, S1 and so on.
That represent security generation, from low to high, from NS to Sx.

Yusuf Lawal · 07-12-2021, 21:19

Itel SRA devices required adb mode to complete read firmware....

JayDi · 07-13-2021, 09:21

Quote:

Originally Posted by Yusuf Lawal

Itel SRA devices required adb mode to complete read firmware....

So, it is extremely hard task to do it ONCE?

InfinityHelp · 07-15-2021, 18:15

@all
success test reports from this thread have been moved to https://forum.gsmhosting.com/vbb/f29...ty-box-725574/

Yusuf Lawal · 07-16-2021, 15:51

Quote:

Originally Posted by JayDi

So, it is extremely hard task to do it ONCE?

Not possible on easybuy devices, company disabled developer settings

07-05-2021, 10:35	#61 (permalink)
vlaxman Junior Member Join Date: Aug 2016 Location: india Age: 37 Posts: 2 Member: 2614406 Status: Offline Thanks Meter: 0	Qc update Qualcomm cpu came into the market. Also stop renewal if you know anything or don't update

07-06-2021, 13:19	#62 (permalink)
tayobjoy1 No Life Poster Join Date: Aug 2020 Location: Mozambique Age: 20 Posts: 967 Member: 2965136 Status: Offline Sonork: 58846 Thanks Meter: 1,202	Nokia C10 TA-1342 Add Card found : 46828B86 , v0149 Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.13 Load IDBase v8331 Ok! Operation : SP Unlock [ v2.13 ] BootMode : SVC 1. Power off device, wait 10-15 seconds 2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! Enter SVC ... Waiting Device ... Check SVC ... SVC : DiagChannel opened! Boot Done! SOC GEN : UniSoc ( E-family and Modern ) BuildInfo : Mantis_00WW-user 11 RP1A.201005.001 V1.180_B01 release-keys Platform Version: MOCORTM_17C_W21.11.2_P1_Debug Project Version: pike2_pub BASE Version: FM_BASE_17C_W21.11.2_P1 HW Version: sc7731e_modem CMP_Time : 04-14-2021 18:44:01 MODEM TAG : MOCORTM_17C_W21.11.2_P1_Debug_FM_BASE_17C_W21.11.2 _P1_sc7731e_modem_pike2_pub NVMng : SecurityInfo IMEI[1] : 357735910746726 IMEI[2] : 357735910746734 WIFIMAC : 44917C05D0C0 BT_MAC : 44917C05D0BF SEC : SLS:2, SKS:0, SKV:4 SLStatus : 2C Status : Locked! Server unlock required! Connecting to server... Connected Init... Init: Ok Authenticating... Authenticated Checking Client version... Client version Ok Balance: 15, price:5 Process... Process : Operation may took 10-15 minutes! >>> Repeat unlock/repair procedure after requested time again! Reconnect Power/Cable! This process took 20 minutes but Still Locked.

07-10-2021, 13:22	#68 (permalink)
Sourovgsm Product Supporter Join Date: Apr 2016 Location: India Posts: 147 Member: 2562751 Status: Offline Thanks Meter: 60	add unlock free support...

07-12-2021, 21:19	#72 (permalink)
Yusuf Lawal No Life Poster Join Date: Oct 2011 Location: Nigeria Posts: 6,593 Member: 1677653 Status: Offline Thanks Meter: 2,769	Itel SRA devices required adb mode to complete read firmware....

07-15-2021, 18:15	#74 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	@all success test reports from this thread have been moved to https://forum.gsmhosting.com/vbb/f29...ty-box-725574/