alcatel ot 6034r firmware needed

[GSMBlade]

Originally Posted by Brka

If you did all steps and wrote eMMC image, after writing make hard reset,
phone should boot up, with original imei and working network.

if not, you should check if your phone is 6034R, or some other model.

described process is for 6034R only.

b.r.
Alex

Hi

I have 6034r and I tried all to write image, it connects in Qualcom mode and I can see emmc and partitions but I can't even delete partitions. Mini pattion tool delete partitions and after refresh they all are there again.
Even I tried to write image with HDD Raw copy and it writes but phone stays in same condition. Power up and writes encription failed and that is needed to do factory reset. I go to recovery and make wipe all data and phone is again in same state.

So is there any other solution or emmc is bricked!?

BR

[Brka]

Originally Posted by GSMBlade

Hi

I have 6034r and I tried all to write image, it connects in Qualcom mode and I can see emmc and partitions but I can't even delete partitions. Mini pattion tool delete partitions and after refresh they all are there again.
Even I tried to write image with HDD Raw copy and it writes but phone stays in same condition. Power up and writes encription failed and that is needed to do factory reset. I go to recovery and make wipe all data and phone is again in same state.

So is there any other solution or emmc is bricked!?

BR

eMMC is in Read-Only mode. It can be probably fixed by either exchanging eMMC chip OR repairing it on external device (box) that supports it.
Use search to see which one.

b.r.
Alex

[GSMBlade]

Originally Posted by Brka

eMMC is in Read-Only mode. It can be probably fixed by either exchanging eMMC chip OR repairing it on external device (box) that supports it.
Use search to see which one.

b.r.
Alex

....it is cheaper to buy new phone than repair this.

I was trying all this solutions for my curiosity....but now I'm done with it!

BR

[hemolyzer]

Wer can i find 6034r firmware pls help!😂

[technomak]

pls send alcatel onetouch 6034r firmware

[vishnu00]

is there any other methods to flash in mobile upgrade tool gets error

[Brka]

Simplest method for unbricking is writing THIS revive pack,
via some of commercial boxes (because phone is old Sahara protocol type, no direct FireHose mode),
and after simply flashing from fastboot - custpack and system

1st unlocking bootloader: fastboot oem unlock
2nd flash all necessary files via fastboot

You can find image files HERE

You have there also CTR recovery, which can make custpack backup also ...
In case you find working phone, will be easy job to backup/restore.

b.r.
ALex

[hacker1gsm]

alex can you please update links it is all dead


b/r

[Brka]

Originally Posted by hacker1gsm

alex can you please update links it is all dead


b/r

I got something ....

6034R-2xN3MY1_1BLF_SingleFlasher_by_bRkA

It's Malaysia ROM, standalone flasher/updater but it can be good for revival,
after you can play with custom recoveries and stock/custom roms.

b.r.
Alex

[hacker1gsm]

hi alex
i use your flasher now phone is dead and in qualcomm mode

[Brka]

Originally Posted by hacker1gsm

hi alex
i use your flasher now phone is dead and in qualcomm mode

Hi,

What was initial problem with phone ?

b.r.
Alex