me45 full flash - GSM-Forum

MrHazeem · 07-06-2002, 04:21

hello ...

i have a dead me45 , i think i need a full flash for it , can any one help ...

Abed

whatever · 07-06-2002, 18:14

Hello.

If you have ME45 dead, you need an EEPROM map file. I think full flash is needless. There is no free software for full flashing ME45 now (AFAIK - I may be wrong).

So read a log from your phone, ask someone to calculate it, upload map to the phone and everything should be OK.

Rachel · 07-06-2002, 19:54

Hi

You will be able to restore your phone by using Unisiemens 4 Soft.
Before you download it, get other phone, same model, same version and make a full flash (with Unisiemens 4) from 00000 to 600000. 6 MB. In that memory range you'll get full flash (included 2 eeproms).

Don't forget to emulate dongle (DongleEmmu directory) before any flash read/write action.

Afterwards, you can write to dead phone the new full flash.

And you phone will be alive....

You can download Unisiemens here:
http://www.spspart.sk/Zaloha/Siemens/UNISiemensSoft.zip

Best regards,

Rachel

MrHazeem · 07-07-2002, 00:51

hello friends...

i download the program from the link...
i read the full flash ,
i write it to my phone,
my phone become alive again and it works...
but the imei changed ...
do you know how to restore my phone imei ...?

thanks a lot ..
Abed

somehex · 07-07-2002, 03:33

You need read log from your phone logger 3 or 4 (write original IMEI) and calculate MAP file. I don't know free map calculator for ME 45. After upload it into your phone. IMEI will be original

Radek · 07-07-2002, 21:05

Does it works on a siemens s45

CyberGSM · 07-09-2002, 04:03

Yes, it does work on S45 and S40 too!

Hollowman

partner44 · 07-09-2002, 17:53

I uploaded S45 Full flash to ME45 and not work. I press phone power buton and low frequecy beep is emitted. I must upload ME45 flash to phone. Someone have a full flash for Siemens ME45 V.21 ?
Thanks in advance.

MULTIFUND · 07-09-2002, 22:00

Hello!

Folds also with a C 45? Or should one take the software All C45 there?

MULTIFUND · 07-10-2002, 14:55

Hello!

Does someone know an answer to my question? About an answer I would be pleased!!

07-06-2002, 04:21	#1 (permalink)
MrHazeem Freak Poster Join Date: Jul 2002 Location: MAD Age: 50 Posts: 483 Member: 13545 Status: Offline Thanks Meter: 2	me45 full flash hello ... i have a dead me45 , i think i need a full flash for it , can any one help ... Abed

07-07-2002, 00:51	#4 (permalink)
MrHazeem Freak Poster Join Date: Jul 2002 Location: MAD Age: 50 Posts: 483 Member: 13545 Status: Offline Thanks Meter: 2	it works............. hello friends... i download the program from the link... i read the full flash , i write it to my phone, my phone become alive again and it works... but the imei changed ... do you know how to restore my phone imei ...? thanks a lot .. Abed

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
need me45 full files	e_mobile	x1x to x45/x50	6	09-30-2005 20:43
ME45 - backup flash	Dentin	x1x to x45/x50	4	09-28-2002 12:29
ME45 Full Flash	gurmk	x1x to x45/x50	0	09-20-2002 01:19
ME45 full flash (UniSiemens) - NEEDED URGENTLY!!	whatever	x1x to x45/x50	4	08-10-2002 13:32
Full Flash for ME45	girishraj	x1x to x45/x50	1	05-30-2002 06:11

07-06-2002, 18:14	#2 (permalink)
whatever Freak Poster Join Date: Feb 2002 Location: Poland Age: 40 Posts: 135 Member: 9600 Status: Offline Thanks Meter: 0	Hello. If you have ME45 dead, you need an EEPROM map file. I think full flash is needless. There is no free software for full flashing ME45 now (AFAIK - I may be wrong). So read a log from your phone, ask someone to calculate it, upload map to the phone and everything should be OK.

07-06-2002, 19:54	#3 (permalink)
Rachel Junior Member Join Date: Jul 2002 Posts: 2 Member: 13534 Status: Offline Thanks Meter: 0	Hi You will be able to restore your phone by using Unisiemens 4 Soft. Before you download it, get other phone, same model, same version and make a full flash (with Unisiemens 4) from 00000 to 600000. 6 MB. In that memory range you'll get full flash (included 2 eeproms). Don't forget to emulate dongle (DongleEmmu directory) before any flash read/write action. Afterwards, you can write to dead phone the new full flash. And you phone will be alive.... You can download Unisiemens here: http://www.spspart.sk/Zaloha/Siemens/UNISiemensSoft.zip Best regards, Rachel

07-07-2002, 03:33	#5 (permalink)
somehex Insane Poster Join Date: Apr 2002 Location: someplace Posts: 76 Member: 11033 Status: Offline Thanks Meter: 0	You need read log from your phone logger 3 or 4 (write original IMEI) and calculate MAP file. I don't know free map calculator for ME 45. After upload it into your phone. IMEI will be original

07-07-2002, 21:05	#6 (permalink)
Radek Junior Member Join Date: Jun 2002 Location: The Netherlands Age: 41 Posts: 19 Member: 13113 Status: Offline Thanks Meter: 0	Does it works on a siemens s45

07-09-2002, 04:03	#7 (permalink)
CyberGSM No Life Poster Join Date: Oct 2001 Location: Austria Posts: 1,054 Member: 6900 Status: Offline Thanks Meter: 9	Yes, it does work on S45 and S40 too! Hollowman

07-09-2002, 17:53	#8 (permalink)
partner44 Junior Member Join Date: Apr 2002 Location: Sevilla, Spain Posts: 28 Member: 10584 Status: Offline Thanks Meter: 0	I uploaded S45 Full flash to ME45 and not work. I press phone power buton and low frequecy beep is emitted. I must upload ME45 flash to phone. Someone have a full flash for Siemens ME45 V.21 ? Thanks in advance.

07-09-2002, 22:00	#9 (permalink)
MULTIFUND Major Poster Join Date: Jun 2002 Location: Germany Posts: 48 Member: 13266 Status: Offline Thanks Meter: 0	Hello! Folds also with a C 45? Or should one take the software All C45 there?

07-10-2002, 14:55	#10 (permalink)
MULTIFUND Major Poster Join Date: Jun 2002 Location: Germany Posts: 48 Member: 13266 Status: Offline Thanks Meter: 0	Hello! Does someone know an answer to my question? About an answer I would be pleased!!